Oxoniobates Containing Metal Clusters

Metal clusters, discrete or condensed, are characteristic of the structures of many compounds which contain transition metals in low oxidation states. The highly reduced oxoniobates support the concept of condensed clusters. They contain Nb₆O₁₂ clusters which are either isolated or linked at the apices of the Nb₆ octahedra to form oligomeric chains or networks. The analysis of the bonding relationships allows the identification of different types of Nb atoms and thus the quantitative prediction of valence electron concentrations for finite or infinite structures composed of these condensed M₆X₁₂ clusters.     

Improved quantification limits in chiral capillary electrochromatography by peak compression effects

The peak compression effect has been applied to improve quantification limits in chiral capillary electrochromatography (CEC). A stationary phase based on the chiral selector vancomycin (Chirobiotic V) was used for separations of the enantiomers of mianserin. By adding solvents with a low dielectric constant, e.g. 2-propanol or tetrahydrofuran, to the sample solution, peak compression could be induced. The plate numbers for the minor enantiomer increased from approximately 100,000 to 1.4-1.6 million plates/m, when the composition of the mobile phase was adjusted so that the analyte eluted within either one of two system zones originating from the sample solution. A 10-fold improvement in the quantification limit for the minor enantiomer was obtained compared to elution under non-focused conditions.     

At-column injector for capillary GC — design and evaluation

The present paper describes constructional details and evaluations of an at-column injector for capillary GC. Injections were made via a sample loop on a 0.32 mm i.d. capillary column. Two rotary valves were employed to allow a wash of the sample loop and a backflush of the transfer line. Repeatability, calculated from absolute area counts for n-alkanes was between 0.3–1% RSD, for injected sample volumes between 5 and 100 μl. Promising results were also obtained with syringe-based injections on narrow bore (100 μ i.d.) columns. Repeatability on the basis of normalized area counts was in the order of 0.1–0.2% RSD, while solvent tailing was practically absent.     

Structure and dynamics of self-assembled poly(ethylene glycol) based coiled-coil nano-objects.

Herein we describe the structure and dynamics of self-assembled nano-objects generated from poly(ethylene glycol) based (PEG-ylated) coiled-coil hybrid block copolymers. Electron paramagnetic resonance (EPR) experiments on spin-labeled samples provided a strong indication for a parallel alignment of the peptide helices in at least the dimeric coiled-coil nano-object and indicated that the PEG chains are folded rather closely around the peptide core of the nano-objects. The EPR results were supported by AFM studies, which revealed the presence of discrete nanosized objects in thin, spin cast films of the block copolymers on mica substrates. Since their size and structure may be engineered via directed mutations in the amino acid sequence, these nano-objects may be interesting building blocks for the development of supramolecular materials with various potential applications.     

Phage-display selection of a human single-chain fv antibody highly specific for melanoma and breast cancer cells using a chemoenzymatically synthesized G(M3)-carbohydrate antigen

Overexpression of the cell-surface glycosphingolipid G(M3) is associated with a number of different cancers, including those of the skin, colon, breast, and lung. Antibodies against the G(M3) epitope have potential application as therapeutic agents in the treatment of these cancers. We describe the chemoenzymatic synthesis of two G(M3)-derived reagents and their use in the panning of a phage-displayed human single-chain Fv (scFv) antibody library derived from the blood of cancer patients. Three scFv-phage clones, GM3A6, GM3A8, and GM3A15, were selected for recombinant expression and were characterized using BIAcore and flow cytometry. BIAcore measurements using the purified, soluble scFvs yielded dissociation constants (K(d)) ranging from 4.2 x 10(-7) to 2.1 x 10(-5) M. Flow cytometry was used to evaluate the ability of each scFv to discriminate between normal human cells (human dermal fibroblast, HDFa), melanoma cells (HMV-1, M21, and C-8161), and breast cancer cells (BCM-1, BCM-2, and BMS). GM3A6 displayed cross-reactivity with normal cells, as well as tumor cells, and GM3A15 possessed little or no binding activity toward any of the cell lines tested. However, GM3A8 bound to five of the six tumor cell lines and showed no measurable reactivity against the HDFa cells. Hence, we have demonstrated that a synthetic G(M3) panning reagent can be used to isolate a fully human scFv that is highly specific for native G(M3) on the surface of tumor cells. The result is a significant step toward effective immunotherapies for the treatment of cancer.     

Peak compression effects in capillary electrochromatography of basic drug substances using a strong cation-exchanger

Peak compression effects in capillary electrochromatography of basic drug substances using a strong cation-exchanger have been studied. Extremely narrow peaks with apparent efficiencies of several million plates per meter could be obtained when the composition of the sample zone differed from that of the mobile phase. The increased efficiencies were predominately observed when the analyte had an elution time similar to that of the electroosmotic flow marker. Peak compression was found to be reproducible and could be obtained for all investigated basic drug substances by altering the composition of the mobile phase in such a way that the analyte co-eluted with the sample zone. An explanation of the observed phenomena is proposed. A sample zone differing in composition from the mobile phase will disturb the equilibrium between the stationary and mobile phase. The elution rate of an analyte will consequently be different when residing inside the sample zone. If the analyte migrates through the sample zone at a higher speed than the rest of the mobile phase and is strongly retained after passing through a boundary in the sample zone, a continuous stacking can be obtained trapping the analyte as a very narrow band.     

Determination of airborne isocyanates as di-n-butylamine derivatives using liquid chromatography and tandem mass spectrometry

A method for the determination of isocyanates as di-n-butyl amine (DBA) derivatives using tandem mass spectrometry (MS/MS) and electrospray ionisation (ESI) is presented. Multiple-reaction monitoring (MRM) of the protonated molecular ions and corresponding deuterium-labelled d₉-DBA derivatives resulted in selective quantifications with correlation coefficients >0.998 for the DBA derivatives of isocyanic acid (ICA), methyl isocyanate (MIC), ethyl isocyanate (EIC), propyl isocyanate (PIC), phenyl isocyanate (PhI), 1,6-hexamethylene diisocyanate (HDI), 2,4-, 2,6-toluene diisocyanate (TDI), isophorone diisocyanate (IPDI), 4,4′-methylenediphenyl diisocyanate (MDI), 3-ring MDI, 4-ring MDI, HDI-isocyanurate, HDI-diisocyanurate, HDI-biuret and HDI-dibiuret. The instrumental precision for 10 repeated injections of a solution containing 0.1 μg ml⁻¹ of the studied derivatives was <2%. Performing MRM of the product ion [DBA + H]⁺ (m/z = 130) from the protonated molecular ion resulted in the lowest detection limits, down to 10 amol (for TDI). Quantification of concentrations below 10⁻⁶ of the occupational exposure limit (OEL) for TDI during 10 min of air sampling was made possible. In an effort to control the formation of alkali adducts, addition of lithium acetate to the mobile phase and monitoring of lithium adducts was evaluated. Having lithium present in the mobile phase resulted in complete domination of [M + Li]⁺ adducts, but detection limits for the studied compounds were not improved. Different deuterium-labelled derivatives as internal standards were evaluated. (1) DBA derivatives of deuterium-labelled isocyanates (d₄-HDI, d₃-2,4-TDI, d₃-2,6-TDI and d₂-MDI), (2) d₉-DBA derivatives of the corresponding isocyanates and (3) d₁₈-DBA derivatives of the corresponding isocyanates. An increase in number of deuterium in the molecule of the internal standard resulted in an increase in instrumental precision and a decrease in correlation within calibration series.     

Thermally induced sign change of Soret coefficient for dilute and semidilute solutions of poly(N-isopropylacrylamide) in ethanol

We studied the thermal diffusion behavior of poly(N-isopropylacrylamide) (PNiPAM) in ethanol in a temperature range from T = 14.0 degrees C to T = 40.0 degrees C by means of thermal diffusion forced Rayleigh scattering. The obtained Soret coefficient S(T) of PNiPAM was positive for lower temperatures (T < 34 degrees C), while S(T) showed a negative value for higher temperatures (T > 34 degrees C). This means PNiPAM molecules move to the cold side for temperatures T < 34 degrees C, whereas they move to the warm side for T > 34 degrees C. This is the first nonaqueous polymeric system for which a sign change with temperature has been observed. We performed static and dynamic light scattering experiments in the same temperature range. The second virial coefficient determined from dilute solutions by static light scattering (SLS) was positive in the comparable temperature range. The results of SLS for the semidilute solution showed a strong repulsion among PNiPAM chains which was enhanced by increasing temperature. These results imply that the observed thermally induced sign change of S(T) does not depend on the intermolecular interactions among PNiPAM chains.