Comparison of various detection limit estimates for volatile sulphur compounds by gas chromatography with pulsed flame photometric detection

This paper addresses the variations that presently exist regarding the definition, determination, and reporting of detection limits for volatile sulphur compounds by gas chromatography with pulsed flame photometric detection (GC-PFPD). Gas standards containing hydrogen sulphide (H(2)S), carbonyl sulphide (COS), sulphur dioxide (SO(2)), methyl mercaptan (CH(3)SH), dimethyl sulphide (DMS), carbon disulphide (CS(2)), and dimethyl disulphide (DMDS) in concentrations varying from 0.36ppb (v/v) up to 1.5ppm (v/v) in nitrogen were prepared with permeation tubes and introduced in the gas chromatograph using a 0.25-ml gas sampling loop. After measuring the PFPD response versus concentration, the method detection limit (MDL), the Hubaux-Vos detection limit (x(D)), the absolute instrument sensitivity (AIS), and the sulphur detectivity (D(s)) were determined for each sulphur compound. The results show that the MDL determined by the US Environmental Protection Agency procedure consistently underestimates the minimum concentrations of volatile sulphur compounds that can be practically distinguished from the background noise with the PFPD. The Hubaux-Vos detection limits and the AIS values are several times higher than the MDL, and provide more conservative estimates of the lowest concentrations that can be reliably detected. Sulphur detectivities are well correlated with AIS values but only poorly correlated with MDL values. The AIS is recommended as a reliable and cost-effective measure of detection limit for volatile sulphur compounds by GC-PFPD, since the AIS is easier and faster to determine than the MDL and the Hubaux-Vos detection limit. In addition, this study confirmed that the PFPD response is nearly quadratic with respect to concentration for all volatile sulphur compounds.     

Synthesis, crystal structure and reactivity of uranium(IV) complexes with p-tert-butylcalix[4]arene ligands

Reactions of UCl4 with 25,27-dimethoxy-5,11,17,23-tetra-tert-butylcalix[4]arene (H2Me2calix) in THF or pyridine at 80 degrees C gave [UCl2(Me2calix)L2] [L = THF (1) or pyridine (2)]. Similar treatment of U(acac)(4) (acac = MeCOCHCOMe) with H2Me2calix in THF or pyridine afforded [U(acac)2(Me2calix)] (3). The bis-calixarene compound [U(Me2calix)(H2calix)] (4) was obtained by reaction of U(OTf)4 or U(OTf)3 with H2Me2calix in pyridine at 110 degrees C. Treatment of UCl4 with H2Me2calix in pyridine at 110 degrees C gave [Mepy][UCl2(Hcalix)(py)2] (5) resulting from demethylation and acid cleavage of the methoxy groups of the calixarene ligand of 2. Adventitious traces of air were responsible for the formation of [Hpy][Mepy]4[{UCl(calix)}3(mu3-O)][UCl6] (6) during the reaction of UCl4 and H2Me2calix, and of [{U(Me2calix)(mu3-O)LiCl(THF)}2] (7) during the reaction of 2 with tBuLi. The X-ray crystal structures of 1.2THF, 2.2py, 3.0.25L (L = THF and py), 4.2py, 5, 6.3py and 7.THF have been determined.     

Morphology-to-properties correlations in anodic porous InP layers

In this paper, we investigate the properties of porous structures anodically grown onto n-InP (100) in HCl. In situ electrochemical characterizations show the pore morphology strongly influences the properties of the InP surfaces. Both dc- and ac-electrochemical measurements reveal an enhancement of the capacitive current and a modification of the electronic distribution at the interface. Photocurrent spectra performed during the pore growth are also strongly modified. For low anodic charges, an increase of the photocurrent with a redshift of the absorption edge is measured. These evolutions can be respectively ascribed (i) to a reflection decrease due to a surface roughening and (ii) to the creation of surface states within the band gap. For higher anodic charges, the photocurrent drops with a narrowing of the spectrum. Using a model based on the “dead” layer, the porous layer is considered as an absorbent film that progressively attenuates the photocurrent of the bulk semiconductor.     

Theoretical and experimental studies on the carbon-nanotube surface oxidation by nitric acid: interplay between functionalization and vacancy enlargement

The nitric acid oxidation of multiwalled carbon nanotubes leading to surface carboxylic groups has been investigated both experimentally and theoretically. The experimental results show that such a reaction involves the initial rapid formation of carbonyl groups, which are then transformed into phenol or carboxylic groups. At room temperature, this reaction takes place on the most reactive carbon atoms. At higher temperatures a different mechanism would operate, as evidenced by the difference in activation energies. Experimental data can be partially related to first-principles calculations, showing a multistep functionalization mechanism. The theoretical aspects of the present article have led us to propose the most efficient pathway leading to carboxylic acid functional groups on the surface. Starting from mono-vacancies, it ends up with the synergistic formation of dangling -COOH groups and the enlargement of the vacancies.     

Ultrafast dynamics of isolated fluorenone

The ultrafast dynamics of isolated 9-fluorenone was studied by femtosecond time-resolved photoionization and photoelectron spectroscopy. The molecule was excited around 264-266 nm into the S(6) state. The experimental results indicate that the excitation is followed by a multistep deactivation. A time constant of 50 fs or less corresponds to a fast redistribution of energy within the initially excited manifold of states, i.e., a motion away from the Franck-Condon region. Internal conversion to the S(1) state then proceeds within 0.4 ps. The S(1) state is long-lived, and only a lower bound of 20 ps can be derived. In addition, we computed excited state energies and oscillator strengths by TD-DFT theory, supporting the interpretation of the experimental data.     

Shear-induced disruption of dense nanoemulsion gels

The structural evolution and rheology of dense nanoemulsion gels, which have been formed by creating strong attractions between slippery nanodroplets, are explored as a function of steady shear rate using rheological small-angle neutron scattering (rheo-SANS). For applied stresses above the yield stress of the gel, the network yields, fracturing into aggregates that break and reform as they tumble and interact in the shear flow. The average aggregate size decreases with increasing shear rate; meanwhile, droplet rearrangements within the clusters, allowed by the slippery nature of the attractive interaction, increase the local density within the aggregates. At the highest shear rates, all clusters disaggregate completely into individual droplets.     

Polydomains in liquid-crystal elastomers

In liquid-crystal elastomers, the simultaneous presence of rubber elasticity due to the crosslinked backbone chains and of optical birefringence due to the mesogens in the side chains lead to exceptional physical properties. An elastic deformation of the network influences the order of the mesogens and, therefore, the optical properties. A theory based on a Landau-de Gennes expansion of the free energy is proposed. In the opaque polydomain phase, the local orientation is given by a compromise between the external mechanical field and a local anchoring interaction. As the field is increased, it becomes energetically favorable for the mesogens to align parallel to the mechanical field, and a transition to a transparent monodomain structure occurs. Results for the average orientation, the stress and the chain conformation are given.     

Access to Paullone Analogues by Intramolecular Heck Reaction

The syntheses of paullone ( 1a ) and three paullone derivatives, including a sulfur analogue ( 2a ), a tricyclic derivative ( 2b ), and a ring‐enlarged variant ( 2c ), are described, Pd‐catalyzed intramolecular Heck reaction being the key step. The kinase‐inhibitory properties of the novel paullone analogues were investigated.     

Trinuclear Schiff base complexes with uranium(V) and copper(II) or zinc(II) ions

Treatment of the uranium(IV) complexes [{ML¹(py)}₂U^IV] (M = Cu, Zn; L¹ = N,N′-bis(3-hydroxysalicylidene)-1,3-propanediamine) with silver nitrate in pyridine led to the formation of the corresponding cationic uranium(V) species which were found to be thermally unstable and were converted back into the parent U^IV complexes; no electron transfer was observed in solution between the U^IV and U^V compounds. In the crystals of [{ML¹(py)}₂U^IV][{ML¹(py)}₂U^V][NO₃], the neutral U^IV and cationic U^V species are clearly identified by the distinct U–O distances. Similar reaction of [{ZnL²(py)}₂U^IV] [L² = N,N′-bis(3-hydroxysalicylidene)-1,4-butanediamine] with AgNO₃ gave crystals of [{ZnL²(py)}U^V{ZnL²(py)₂}][NO₃] but the copper counterpart was not isolated. Crystals of [{ZnL¹(py)}₂U^V][OTf] · THF (OTf = OSO₂CF₃) were obtained fortuitously from the reaction of [Zn(H₂L¹)] and U(OTf)₃.