Determination of pirimicarb and endosulfan in commercial pesticide formulations by Fourier transform infrared spectrometry

A routine method based on Fourier transform infrared spectrometry was developed for the simultaneous determination of pirimicarb and endosulfan in commercially available pesticide formulations. The method is based on peak area absorbance measurements between 1362 and 1352 cm(-1), corrected with a baseline fixed at 1338 cm(-1), for pirimicarb and peak area absorbance measurements between 919 and 909 cm(-1) with a baseline fixed at 931 cm(-1) for endosulfan; chloroform solutions for analysis were obtained by direct dilution of emulsifiable concentrates or by solvent extraction from solid samples. Various extraction conditions and appropriate band selection were investigated, and interference studies were performed. Under the experimental conditions selected, limits of detection of 13 microg/g for pirimicarb and 150 microg/g for endosulfan were obtained that correspond to 0.13 and 1.6% (w/w), respectively, in commercial samples. Results from analyses of commercial samples by the developed method compared well with those obtained by a liquid chromatography reference method.     

Observations on maximum entropy processing of MR images

A maximum entropy (MAXENT) criteria for MR image processing optimizations has previously shown poor performance, but this note observes that there are two entirely different kinds of "data transmission" applications which appear to have been intermixed. In the two cases, "image entropy" actually refers to different kinds of data variables. The previous literature formulations are for transfer of data in which pixel-locations are the transmitted variable, and these pixels may be neither uniform nor constant. The second application concerns the MRI data set for display. Its data variables are image pixel-values of magnetization intensity, and the data transfer mode has the sense of visual display. When MAXENT criteria are modified to address an array of pixel-value intensities, and use a pixel-value information entropy rather than pixel-locations entropy, then successful data processing results. Restoring display visualization from highly nonuniform surface coils for lumbar spine scans are demonstrated, as an example of MAXENT usefulness.     

A Novel, Simple and Efficient Synthesis of Ferrocenyl Enones and Alkynols

Propargylic alcohols are versatile precursors to many organic molecules including natural products and pharmaceutical compounds.[1] In our continuing interest in the development of practical methods for synthesis of ferrocene derivatives, we decided to investigate the efficiencies of ferrocenylacetylene addition to aromatic aldehydes under t-BuOKcatalyzed condition.[2] Interestingly, we found that the usually reliable coupling reaction between terminal alkyne of type 1 and aromatic aldehydes of type 2 does not furnish the expected propargylic alcohols, but that the isomeric aryl enones 3are found in high yield and very short reaction time (10～20 min). This provided a promising protocol for preparation of ferrocenyl chalcones in a practical, economical and mild sense compared with the traditional method. To the best of our knowledge, this unusual reaction was first observed for the addition of ferrocenylacetylene to aldehyde in a base-catalyzed manner (Eq. 1).     

Field preconcentration of cadmium from seawater by using a minicolumn packed with Amberlite XAD-4/4-(2-pyridylazo) resorcinol and its flow-injection-flame atomic absorption spectrometric determination at the ng L(-1) Level

A flow injection analysis-flame atomic absorption spectrometric method for the determination of cadmium in seawater was developed with the aim of yielding a sensitive assay with a low detection limit. The method employs a field flow preconcentration technique involving a minicolumn containing Amberlite XAD-4 impregnated with the complexing agent 4-(2-pyridylazo) resorcinol. A Plackett-Burman 2(7)x3/32 design for seven factors (sample pH, sample flow rate, eluent volume, eluent concentration, eluent flow rate, ethanol percentage in the eluent and minicolumn diameter) was carried out in order to find the significant variables affecting the field continuous preconcentration system (FCPS) and the flow injection elution manifold for cadmium determination in seawater samples by flame atomic absorption spectrometry. Cadmium can be preconcentrated with an enrichment factor of 1053 for a sample volume of 200 mL and a preconcentration time of 57 min. In these experimental conditions, the method provides a linear relationship between absorbance and cadmium concentration in the range from 22-1900 ng L(-1), with a detection limit (3SD) of 6 ng L(-1). The precision (expressed as relative standard deviation) for eleven independent determinations reached values of 8.9-0.8% in cadmium solutions of 50-700 ng L(-1). Analysis of certified reference materials (SLEW-3 and NASS-5) showed good agreement with the certified value. This procedure was applied to the determination of cadmium in seawater from Galicia (Spain).     

Modular bis(oxazoline) ligands for palladium catalyzed allylic alkylation: unprecedented conformational behaviour of a bis(oxazoline) palladium eta3-1,3-diphenylallyl complex

New families of enantiopure bis(oxazolines) with 4,5-trans (5 a-g) or 4,5-cis (6 c) stereochemistry at the individual rings have been prepared in high yield. Their eta(3)-allyl palladium complexes (8 a-g, 9 c and 10) have been used as catalytic precursors in allylic alkylation reactions with excellent enantioselectivities (up to 96 %) for the trans oxazoline derivatives, while Pd/6 c system was inactive. NMR studies on palladium eta(3)-1,3-diphenylallyl intermediates (11 a, c and e) showed the presence of syn/syn- and syn/anti-allyl isomers in solution; this resembles the first example of eta(3)-eta(1)-eta(3) isomerism in Pd allylic complexes containing bis(oxazolines) derived from malonic acid.     

Singlet oxygen generation versus O–O homolysis in phenyl-substituted anthracene endoperoxides investigated by RASPT2, CASPT2, CC2, and TD-DFT methods

Peptidylarginine deiminase 4 (PAD4), also known as protein arginine deiminase 4, performs a post-translational deimination that converts arginine to citrulline. The dysregulation of PAD4 has been implicated in a number of diseases, including rheumatoid arthritis (RA) and cancer. This makes PAD4 an important therapeutic target. To develop small-molecule inhibitors as potential treatments, it is advantageous if the catalytic mechanism is well understood. The protonation states of the active site residues, which have long been under controversy, have a direct impact on the catalytic mechanism. Two competing mechanisms are under investigation in the current literature. The first is a reverse protonation mechanism that depends on the active site histidine and cysteine existing as an ion pair. The second is a substrate-assisted mechanism that depends on the active site histidine and cysteine being neutral. This study uses the semimicroscopic protein dipoles Langevin dipoles (PDLD/S) linear response approximation method in the MOLARIS software package to calculate the change in solvation energy of moving the residue from water to the protein interior, and then using that information to assess the protonation states of the active site residues of PAD4. Results from these calculations suggest that in the enzyme–substrate complex of PAD4, the cysteine and histidine are protonated and deprotonated, respectively, and are therefore both neutral, analogous to the proposed protonation states of the active site residues in the Michaelis complex in the substrate-assisted mechanism.     

Reactions of tertiary propargyl alcohols with sodium halides under oxidative conditions

The study of the reactions of tertiary propargyl alcohols with sodium halides under oxidative conditions is presented. With sodium iodide, α-iodoenones were formed, however, with sodium bromide or chloride the α-haloenones were only formed in low yields under anhydrous conditions. Conversely, upon addition of water to the reaction mixtures, α,α-dibromoketones and α,α-dichloroketones were formed in good yields, but α,α-diiodoketones were not observed.