Batch versus Flow Photochemistry: A Revealing Comparison of Yield and Productivity

The use of flow photochemistry and its apparent superiority over batch has been reported by a number of groups in recent years. To rigorously determine whether flow does indeed have an advantage over batch, a broad range of synthetic photochemical transformations were optimized in both reactor modes and their yields and productivities compared. Surprisingly, yields were essentially identical in all comparative cases. Even more revealing was the observation that the productivity of flow reactors varied very little to that of their batch counterparts when the key reaction parameters were matched. Those with a single layer of fluorinated ethylene propylene (FEP) had an average productivity 20 % lower than that of batch, whereas three‐layer reactors were 20 % more productive. Finally, the utility of flow chemistry was demonstrated in the scale‐up of the ring‐opening reaction of a potentially explosive [1.1.1] propellane with butane‐2,3‐dione.     

A General Method for Preparing Bridged Organosilanes with Pendant Functional Groups and Functional Mesoporous Organosilicas

New organosilica precursors containing two triethoxysilyl groups suitable for the organosilica material formation through the sol‐gel process were designed and synthesised. These precursors display alkyne or azide groups for attaching targeted functional groups by copper‐catalysed azide–alkyne cycloaddition (CuAAC) and can be used for the preparation of functional organosilicas following two strategies: 1) the functional group is first appended by CuAAC under anhydrous conditions, then the functional material is prepared by the sol‐gel process; 2) the precursor is first subjected to the sol‐gel process, producing porous, clickable bridged silsesquioxanes or periodic mesoporous organosilicas (PMOs), then the desired functional groups are attached by means of CuAAC. Herein, we show the feasibility of both approaches. A series of bridged bis(triethoxysilane)s with different pending organic moieties was prepared, demonstrating the compatibility of the first approach with many functional groups. In particular, we demonstrate that organic functional molecules bearing only one derivatisation site can be used to produce bridged organosilanes and bridged silsesquioxanes. In the second approach, clickable PMOs and porous bridged silsesquioxanes were prepared from the alkyne‐ or azide‐containing precursors, and thereafter, functionalised with complementary model azide‐ or alkyne‐containing molecules. These results confirmed the potential of this approach as a general methodology for preparing functional organosilicas with high loadings of functional groups. Both approaches give rise to a wide range of new functional organosilica materials.     

Unraveling the Crystal Structure of Lanthanide–Murexide Complexes: Use of an Ancient Complexometry Indicator as a Near‐Infrared‐Emitting Single‐Ion Magnet

Herein, we provide some structural evidence of the complexation color‐change of murexide solutions in presence of lanthanide, which has been used for decades in complexometric studies. For Ln=Sm to Lu and Y, the compounds crystallize as monomeric [Ln(Murex)₃] ? 11 H₂O with an N3O6 tricapped square‐antiprism environment, which are stable up to 250 °C. Single‐ion magnet (SIM) behavior is then observed on the Yb^III derivative in an original nine‐coordinated environment. In‐field slow relaxation (Δ=(15.6±1) K; τ₀=2.73×10^?6 s) is observed with a very narrow distribution of the relaxation time (α_max=0.09). Magnetic and photophysical properties can be correlated. On one hand the analysis of NIR emission spectrum permits to have access to crystal field parameters and to compare them with those extracted from dc measurements. On the other hand, magnetic measurements permit to identify the nature of the M _J states involved in the ²F_5/2→²F_7/2 luminescence spectrum. The gap between the low‐lying states is in agreement with the energy barrier obtained from magnetic slow‐relaxation measurement.     

Modulable and Highly Diastereoselective Carbometalations of Cyclopropenes

The copper‐catalyzed carbomagnesiation reaction of cyclopropenyl esters 1 leads to various substituted cyclopropanes species 3 in good yields with very high diastereoselectivities. The reaction proceeds through a syn‐chelated carbomagnesiation reaction and could be extended to various cyclopropenylmethyl ester derivatives 5 . The potential of this approach was illustrated by the preparation of two consecutive all‐carbon quaternary stereocenters. However, the carbometalation reaction needs to be performed at temperature ranging from ?35 to ?20 °C to avoid subsequent fragmentation reaction into stereodefined β,γ‐nonconjugated unsaturated esters 4 . Alternatively, the carbocupration reaction with organocopper species could also be performed to leads to configurationally stable cyclopropyl copper species 2[Cu] . Additionally, when the Lewis acid character of the copper center is decreased (i.e., RCuCNLi), the reaction proceed with an anti‐selectivity. The diastereodivergent behavior of these organometallic species is of synthetic interest, since both diastereomers syn‐ 3 and anti‐ 3 can be obtained, at will, from the same precursor cyclopropenyl esters 1 .     

Direct Oxidative Coupling of N‐Acetyl Indoles and Phenols for the Synthesis of Benzofuroindolines Related to Phalarine

Inspired by the biogenetic synthesis of benzofuroindoline‐containing natural products, we designed an oxidative coupling between phenol and N‐acetyl indoles. This straightforward and direct radical process, mediated by 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone and FeCl₃ allowed the regioselective synthesis of benzofuro[3,2‐b]indolines, whose structure is found in the natural product phalarine.     

Formation of a Single-Crystal Aluminum-Based MOF Nanowire with Graphene Oxide Nanoscrolls as Structure-Directing Agents

An innovative strategy is proposed to synthesize single-crystal nanowires (NWs) of the Al³⁺ dicarboxylate MIL-69(Al) MOF by using graphene oxide nanoscrolls as structure-directing agents. MIL-69(Al) NWs with an average diameter of 70±20 nm and lengths up to 2 μm were found to preferentially grow along the [001] crystallographic direction. Advanced characterization methods (electron diffraction, TEM, STEM-HAADF, SEM, XPS) and molecular modeling revealed the mechanism of formation of MIL-69(Al) NWs involving size-confinement and templating effects. The formation of MIL-69(Al) seeds and the self-scroll of GO sheets followed by the anisotropic growth of MIL-69(Al) crystals are mediated by specific GO sheets/MOF interactions. This study delivers an unprecedented approach to control the design of 1D MOF nanostructures and superstructures.     

Controlled Generation of 9-Boratriptycene by Lewis Adduct Dissociation: Accessing a Non-Planar Triarylborane

A highly bent triarylborane, 9-boratriptycene, was generated in solution by selective protodeboronation of the corresponding tetra-aryl boron ate complex with the strong Brønsted acid HNTf₂. The iptycene core confers enhanced Lewis acidity to 9-boratriptycene, making it unique in terms of structure and reactivity. We studied the stereoelectronic properties of 9-boratriptycene by quantifying its association with small N- and O-centered Lewis bases, as well as with sterically hindered phosphines. The resultant Lewis adducts exhibited unique structural, spectroscopic, and photophysical properties. Beyond the high pyramidalization of the 9-boratriptycene scaffold and its low reorganization energy upon Lewis base coordination, quantum chemical calculations revealed that the absence of π donation from the triptycene aryl rings to the boron vacant p_z orbital is one of the main reasons for its high Lewis acidity.     

铂合金氧还原催化剂:合成、结构和性能

质子交换膜燃料电池是一种将燃料中的化学能直接转化为电能的装置,它具有转化效率高、能量密度高、低温启动、易于操作等优点,因而被认为是最具发展前景的新能源利用方式,在电动汽车、便携电源及分散式电站有着广泛应用.但是,目前质子交换膜燃料电池技术的发展面临着巨大挑战,主要问题包括高成本、低功率密度和低寿命.众所周知,质子交换膜燃料电池中的阴极氧还原反应在酸性条件下是一个复杂的四电子过程,动力学速度缓慢,限制了电池的最终性能.目前大量使用的阴极氧还原催化剂是细小的铂或铂合金纳米颗粒负载在碳载体上,其成本占燃料电池总成本的比例最大.制约燃料电池商业化发展的另一个重要问题是电池寿命低,其中氧还原催化剂的稳定性是决定电池寿命的主要因素.在这样的研究背景下,如何降低催化剂中铂的用量、提高催化剂活性和稳定性显得尤为重要,这也是近年来国内外学者研究的热点.在铂基合金催化剂中,通常采用过渡金属元素作为掺杂元素,由于原子半径不匹配(几何效应)以及电子结构不同(电子效应),合金催化剂表现出优于纯铂催化剂的催化性能.近几年,对于铂基合金催化剂的研究已取得重大进展,以合金组成和结构研究为基础,通过精确控制原子结构、调控表面电子状态以及制备工艺,获得了各种特殊形貌的催化剂,大大提高了催化活性.本文深入综述了近年来铂基合金氧还原催化剂制备、形貌和性能,特别关注了催化剂形貌和催化活性之间的关系.值得注意的是,具有有序原子排列的铂合金催化剂不仅在半电池中表现出优异活性,在实际质子交换膜燃料电池中也显示了很好的活性和稳定性.另一方面,碳载体的形貌及微观结构也对提高催化活性和稳定性起到决定性作用,通过化学手段加强金属纳米颗粒与碳载体之间的相互作用也是提高催化剂稳定性的重要途径.尽管铂基氧还原催化剂在近几年取得了重要进展,但在实际商业化过程中还存在诸多挑战,本文在综述进展的基础上,对铂基催化剂的发展提出了展望.首先,对于氧还原反应机理仍需要深入研究,采用更加精确的理论模型模拟氧还原动力学过程,以获得影响催化活性的关键因素.其次,提高催化剂在膜电极中的催化活性和利用率.目前,氧还原催化剂在半电池测试中性能优异,但是实际燃料电池操作条件下其性能远不能达到要求,这与膜电极、催化剂层及扩散层结构相关.因此,基于不同铂基催化剂的特性,合理设计膜电极组件的结构是将催化剂进行实际应用的基础.最后,催化剂的稳定性仍需进一步提高,尽管目前大部分催化剂在实验室半电池研究中表现了很好的稳定性,但在实际燃料电池中的稳定性研究还不足,而且对催化剂在膜电极中性能衰退机理的研究也非常有限.因此,对于铂基氧还原催化剂的研发仍需要国内外科研工作者不懈的努力.     

Microwave-Assisted Desulfation of the Hemolytic Saponins Extracted from Holothuria scabra Viscera

Saponins are plant and marine animal specific metabolites that are commonly considered as molecular vectors for chemical defenses against unicellular and pluricellular organisms. Their toxicity is attributed to their membranolytic properties. Modifying the molecular structures of saponins by quantitative and selective chemical reactions is increasingly considered to tune the biological properties of these molecules (i) to prepare congeners with specific activities for biomedical applications and (ii) to afford experimental data related to their structure–activity relationship. In the present study, we focused on the sulfated saponins contained in the viscera of Holothuria scabra, a sea cucumber present in the Indian Ocean and abundantly consumed on the Asian food market. Using mass spectrometry, we first qualitatively and quantitatively assessed the saponin content within the viscera of H. scabra. We detected 26 sulfated saponins presenting 5 different elemental compositions. Microwave activation under alkaline conditions in aqueous solutions was developed and optimized to quantitatively and specifically induce the desulfation of the natural saponins, by a specific loss of H₂SO₄. By comparing the hemolytic activities of the natural and desulfated extracts, we clearly identified the sulfate function as highly responsible for the saponin toxicity.