All-fiber add-drop filters based on microfiber knot resonators

We demonstrate an all-fiber add-drop filter composed of a microfiber knot (working as a resonator) and a fiber taper (working as a dropping fiber). The dropping taper can be either parallel or perpendicular to the input port of the filter. A quality factor (Q factor) of 13,000 is obtained from a parallel-coupling 308 microm diameter microknot add-drop filter with a free spectral range (FSR) of 1.8 nm. A Q factor of approximately 3300 is obtained from a cross-coupling 65 microm diameter microknot add-drop filter with a FSR of 8.1 nm. This device is particularly easy to fabricate and to connect to fiber systems.     

Transfer functions of US transducers for harmonic imaging and bubble responses

Current medical diagnostic echo systems are mostly using harmonic imaging. This means that a fundamental frequency (e.g., 2 MHz) is transmitted and the reflected and scattered higher harmonics (e.g., 4 and 6 MHz), produced by nonlinear propagation, are recorded. The signal level of these harmonics is usually low and a well-defined transfer function of the receiving transducer is required. Studying the acoustic response of a single contrast bubble, which has an amplitude in the order of a few Pascal, is another area where an optimal receive transfer function is important.

We have developed three methods to determine the absolute transfer function of a transducer. The first is based on a well-defined wave generated by a calibrated source in the far field. The receiving transducer receives the calibrated wave and from this the transfer functions can be calculated. The second and third methods are based on the reciprocity of the transducer. The second utilizes a calibrated hydrophone to measure the transmitted field. In the third method, a pulse is transmitted by the transducer, which impinges on a reflector and is received again by the same transducer. In both methods, the response combined with the transducer impedance and beam profiles enables the calculation of the transfer function.

The proposed methods are useful to select the optimal piezoelectric material (PZT, single crystal) for transducers used in reception only, such as in certain 3D scanning designs and superharmonic imaging, and for selected experiments like single bubble behavior.

We tested and compared these methods on two unfocused single element transducers, one commercially available (radius 6.35 mm, centre frequency 2.25 MHz) the other custom built (radius 0.75 mm, centre frequency 4.3 MHz). The methods were accurate to within 15%.     

Contrôle par rotation ou par aspiration de l'écoulement autour d'un cylindre calculé par Simulation des Grandes Échelles

Control of the flow around a circular cylinder is studied using Large Eddy Simulation. The influence of control by rotation and suction on the flow characteristics is considered for several Reynolds numbers. Comparisons with experiments were conducted at $\mathit{Re}={10}^5$ for the flow with and without control. A drag reduction up to 30% is obtained for an usual suction intensity. To cite this article: G. Fournier et al., C. R. Mecanique 333 (2005).     

Ammonia–(Dinitramido)boranes: High‐Energy‐Density Materials

Two ammonia–(dinitramido)boranes were synthesized by the reaction of dinitroamine with ammonia–borane. These compounds are the first reported examples of (dinitramido)boranes. Ammonia–mono(dinitramido)borane is a perfectly oxygen‐balanced high‐energy‐density material (HEDM) composed of an ammonia–BH₂ fuel group and a strongly oxidizing dinitramido ligand. Although it is thermally not stable enough for practical applications, its predicted specific impulse as a solid rocket propellant would be 333 s. Its predicted performance as an explosive matches that of pentaerythtritol tetranitrate (PETN) and significantly exceeds that of trinitrotoluene (TNT). Its structure was established by X‐ray crystallography and vibrational and multinuclear NMR spectroscopy. Additionally, the over‐oxidized ammoniabis(dinitramido)borane was detected by NMR spectroscopy.     

Sequential Synthesis of 3 d–3 d, 3 d–4 d,and 3 d–5 d Hybrid Polyoxometalates and Application to the Electrocatalytic Oxygen Reduction Reactions

The Co₇(AlePy)₂ polyoxometalate, which encloses a {(PW₉)₂Co^II₇} core covalently bound to two free aminopyridine groups through bisphosphonate ligands ( AlePy ), has been isolated. It can be used as a precursor, allowing the synthesis of heterometallic hybrid compounds, as illustrated by the characterization of cobalt/zinc ( Co₇(AlePyZn)₂ ), cobalt/palladium ( Co₇(AlePyPd)₂ ), and cobalt/platinum ( Co₇(AlePyPt)₂ ) species. A composite based on the water‐insoluble precious metal‐free Co₇(AlePyZn)₂ compound and the low‐cost carbon material Vulcan XC‐72 has been selected as a cathode material ( Co₇Zn/C ) for oxygen reduction reaction studies. The electrocatalytic performances of the Co₇Zn/C hybrids were assessed at neutral and basic pH, showing that Co₇Zn/C exhibits high selectivity for the four‐electron reduction of O₂. Moreover, its durability is superior to that of a commercial Pt/C catalyst with 20 % loading. Also, comparative studies performed in the presence of methanol have indicated that Co₇Zn/C has a much better tolerance to the crossover effect than Pt/C . Altogether, these results indicate for the first time that, even in neutral media, polyoxometalate/carbon composites can represent low‐cost oxygen reduction catalysts that can function stably, for a long time, and with high performance.     

Nanometrization of Lanthanide‐Based Coordination Polymers

Heteronuclear lanthanide‐based coordination polymers are microcrystalline powders, the luminescence properties of which can be precisely tuned by judicious choice of the rare‐earth ions. In this study, we demonstrate that such materials can also be obtained as stable solutions of nanoparticles in non‐toxic polyols. Bulk powders of the formula [Ln_2?2xLn′_2x(bdc)₃ ? 4 H₂O]_∞ (where H₂bdc denotes 1,4‐benzene‐dicarboxylic acid, 0≤x≤1, and Ln and Ln′ denote lanthanide ions of the series La to Tm plus Y) afford nanoparticles that have been characterized by dynamic light‐scattering (DLS) and transmission electron microscopy (TEM) measurements. Their luminescence properties are similar to those of the bulk materials. Stabilities versus time and versus dilution with another solvent have been studied. This study has revealed that it is possible to tune the size of the nanoparticles. This process offers a reliable means of synthesizing suspensions of nanoparticles with tunable luminescence properties and tunable size distributions in a green solvent (glycerol). The process is also extendable to other coordination polymers and other solvents (ethylene glycol, for example). It constitutes a new route for the facile solubilization of lanthanide‐based coordination polymers.     

Anisotropic Lithium Ion Conductivity in Single‐Ion Diblock Copolymer Electrolyte Thin Films

Well‐defined single‐ion diblock copolymers consisting of a Li‐ion conductive poly(styrenesulfonyllithium(trifluoromethylsulfonyl)imide) (PSLiTFSI) block associated with a glassy polystyrene (PS) block have been synthesized via reversible addition fragmentation chain transfer polymerization. Conductivity anisotropy ratio up to 1000 has been achieved from PS‐b‐PSLiTFSI thin films by comparing Li‐ion conductivities of out‐of‐plane (aligned) and in‐plane (antialigned) cylinder morphologies at 40 °C. Blending of PS‐b‐PSLiTFSI thin films with poly(ethylene oxide) homopolymer (hPEO) enables a substantial improvement of Li‐ion transport within aligned cylindrical domains, since hPEO, preferentially located in PSLiTFSI domains, is an excellent lithium‐solvating material. Results are also compared with unblended and blended PSLiTFSI homopolymer (hPSLiTFSI) homologues, which reveals that ionic conductivity is improved when thin films are nanostructured.

     

Evaluation of temperature gradients within combusting droplets in linear stream using two colors laser-induced fluorescence

The scope of this paper concerns the heating process of fuel droplets injected in a hot gaseous environment. The two colors laser-induced fluorescence technique allows measuring the temperature distribution within a droplet by scanning the droplet volume by a sufficiently small probe volume compared to the droplet volume itself. The temperature field is reconstructed using two approaches which have been compared. One is based on a geometrical optics model and the other is based on the 3D calculation of the internal excitation field within the droplet, using the generalized Lorenz-Mie theory. Experimental results have been obtained on a combusting monodisperse ethanol droplet stream (diameter around 200 m).