Improvement of high-frequency properties of Co_2FeSi Heusler films by ultrathin Ru underlayer

Heusler Co2FeSi films with a uniaxial magnetic anisotropy and high ferromagnetic resonance frequency fr were deposited by an oblique sputtering technique on Ru underlayers with various thicknesses tRufrom 0 nm to 5 nm.It is revealed that the Ru underlayers reduce the grain size of Co2FeSi,dramatically enhance the magnetic anisotropy field HK induced by the internal stress from 242 Oe(1 Oe=79.5775 A·m^-1)to 582 Oe with an increment ratio of 2.4,while a low damping coefficient remains.The result of damping implies that the continuous interface between Ru and Co2FeSi induces a large in-plane anisotropic field without introducing additional external damping.As a result,excellent high-frequency soft magnetic properties with fr up to 6.69 GHz are achieved.     

Investigation of active-region doping on InAs/GaSb long wave infrared detectors

The eight-band κ·p model is used to establish the energy band structure model of the type-II InAs/GaSb superlattice detectors with a cut-off wavelength of 10.5μm,and the best composition of M-structure in this type of device is calculated theoretically.In addition,we have also experimented on the devices designed with the best performance to investigate the effect of the active region p-type doping temperature on the quantum efficiency of the device.The results show that the modest active region doping temperature(Be:760℃)can improve the quantum efficiency of the device with the best performance,while excessive doping(Be:>760℃)is not conducive to improving the photo response.With the best designed structure and an appropriate doping concentration,a maximum quantum efficiency of 45% is achieved with a resistance-area product of 688?·cm^2,corresponding to a maximum detectivity of 7.35×10^11cm·Hz^1/2/W.     

基于锥面衍射实现高效率双光栅光谱合成

分析了基于锥面衍射的双光栅光谱合成系统的可行性,设计了激光入射角为Littrow角附近的双多层介质膜（MLD）光栅光谱合成系统,开展了两路合成实验。当入射极角等于自准直入射角,入射方位角为6°时,光栅衍射效率近似等于光束自准直入射时的衍射效率。基于锥面衍射原理,对中心波长为1050.24 nm和1064.33 nm的两束光纤激光子束进行合成,入射极角为43.99°,测得合成效率为92.9%,较基于非锥面衍射的双光栅光谱合成系统的合成效率提高了8.8%;测得合成光斑光束质量M_x²＝1.204,M_y²＝1.467,与基于非锥面衍射的双光栅光谱合成系统输出光斑光束质量基本一致。     

100 MeV质子束流品质诊断及剂量测量准确性评估方法研究

质子辐射生物学效应是太空放射生物学和质子束放疗研究的重要基础,可为空间环境下人员的危险性评估以及质子治疗优化设计提供科学依据。依托加速器建立相应的生物样本辐照技术是开展此类研究的前提条件。中国原子能科学研究院最近建立的100 MeV强流质子回旋加速器提供的中能质子束流为目前国内能量最高,特别适合用于太空放射生物学和质子治疗相关研究。本研究中,利用在束和离线等多种手段建立了中能质子束流诊断和剂量测量方法,对加速器引出的100 MeV质子照射野大小、均匀性等束流品质以及剂量测量系统准确性进行了分析和评估。结果表明,对光子剂量响应好的LiF(Mg,Ti)热释光探测器,对90 MeV质子同样具有良好的剂量响应关系,可作为中能质子剂量准确性评估的手段之一。在5.0 cm×5.0 cm照射野范围内,加速器引出的100 MeV质子束流的均匀性好于90%,在线剂量测量系统准确性好于93%,束流品质和剂量测量条件基本满足辐射生物学的要求,可为质子辐射生物学效应研究的开展提供可靠保障。     

超导离子源铌三锡六极线圈镜像磁场约束结构的优化设计

中国科学院近代物理研究所正在进行国际首台45 GHz全铌三锡超导离子源FECR(Fourth Electron Cyclotron Resonance)磁体的研制,该离子源磁体线圈由六个铌三锡超导六极线圈和四个铌三锡超导螺线管线圈组成。由于单根超导线绕制异形六极线圈(非标准鞍型)技术难度大,且铌三锡超导性能对应力敏感,为了测试单个铌三锡六极线圈性能能否达到设计指标,基于铝合金壳层结构和Bladder-Key精确预紧技术,设计了镜像磁场约束结构。本工作主要阐述了运用ANSYS参数化设计编程对镜像磁场结构进行优化设计的过程和优化后的镜像磁场结构,确定了室温预应力大小,并给出了线圈经过室温预紧、冷却降温和加电励磁后的最大等效应力。进一步结合实际六极线圈制作公差(±0.1 mm),分析和评估了公差对镜像磁场结构中六极线圈预应力施加的影响。     

用刚体理论分析烟囱倒下的断点位置

烟囱倾倒的过程中将会在某处发生断裂.通过刚体理论知识,采用圆台模型分析了烟囱倾倒过程中的动力学过程,通过理论推导找到极值点,理论上推断出烟囱断裂的位置.     

水火箭的制作与发射——初中物理教学课外活动拓展

物理课外实验能让学生真正动手操作、体验,从而提高学生的物理核心素养.水火箭的制作与发射,蕴含知识面广,发射效果震撼,能让学生对物理与科技的联系有直观深刻的认识.     

Identity-Based Quantum Designated Verifier Signature

International Journal of Theoretical Physics - Designated verifier signatures are very useful in the applications such as e-voting and auction. In this paper, an identity-based quantum designated...     

Evaluation of Charged Defect Energy in Two-Dimensional Semiconductors for Nanoelectronics: The WLZ Extrapolation Method

Defects play a central role in controlling the electronic properties of two-dimensional (2D) materials and realizing the industrialization of 2D electronics. However, the evaluation of charged defects in 2D materials within first-principles calculation is very challenging and has triggered a recent development of the WLZ (Wang, Li, Zhang) extrapolation method. This method lays the foundation of the theoretical evaluation of energies of charged defects in 2D materials within the first-principles framework. Herein, the vital role of defects for advancing 2D electronics is discussed, followed by an introduction of the fundamentals of the WLZ extrapolation method. The ionization energies (IEs) obtained by this method for defects in various 2D semiconductors are then reviewed and summarized. Finally, the unique defect physics in 2D dimensions including the dielectric environment effects, defect ionization process, and carrier transport mechanism captured with the WLZ extrapolation method are presented. As an efficient and reasonable evaluation of charged defects in 2D materials for nanoelectronics and other emerging applications, this work can be of benefit to the community.     

Effect of Environment on the Scattering of Electrons by a Junction of Different Topological Materials

The studies of electron transport through a junction of topological materials in the literature so far ignore the coupling of a topological material to its surrounding environment. Here, the dynamics of an open system through a stochastic Hamiltonian are simulated to investigate the influence of the environment on the scattering of electrons by a junction of different topological materials, such as a Dirac–Weyl magnetic junction and a topological insulator. It is found that, although the detrimental effect of the environment is inevitable, the Landauer conductance can be enhanced via adjusting the system–environment coupling strength. This result supplies the possibilty of changing the transport feature of topological materials by modulating the surrounded environment. It is also demonstrated that a non-Hermitian Hamiltonian can be used to replace the stochastic Hamiltonian for this study, when the system and the environment coupling are weak.