Isolation of Bisphenol A-Tolerating/degrading Shewanella haliotis Strain MH137742 from an Estuarine Environment

Applied Biochemistry and Biotechnology - The human exposure to bisphenol A (BPA) occurs frequently. Once, this compound was one of the highest volume chemicals produced worldwide and used as a...     

Thermal behavior and structural properites of plant-derived eugenyl acetate

Eugenol is an allyl chain-substituted guaiacol in the biosynthesized phenylpropanoid compound class derived from Syzygium aromaticum L. and widely used in folk medicine. Nonetheless, its pharmacological use is limited by some problems, such as instability when exposed to light and high temperature. In order to enhance stability, the eugenol molecule was structurally modified, resulting in eugenyl acetate. The eugenyl acetate’s thermal behavior and crystal structure was then characterized by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) and compared to a commercial sample.     

Influence of the thermal treatment in the crystallization of NiWO4 and ZnWO4

NiWO₄ and ZnWO₄ were synthesized by the polymeric precursor method at low temperatures with zinc or nickel carbonate as secondary phase. The materials were characterized by thermal analysis (TG/DTA), infrared spectroscopy, UV–Vis spectroscopy and X-ray diffraction. NiWO₄ was crystalline after calcination at 350 °C/12 h while ZnWO₄ only crystallized after calcination at 400 °C for 2 h. Thermal decomposition of the powder precursor of NiWO₄ heat treated for 12 h had one exothermic transition, while the precursor heat treated for 24 h had one more step between 600 and 800 °C with a small mass gain. Powder precursor of ZnWO₄ presented three exothermic transitions, with peak temperatures and mass losses higher than NiWO₄ has indicating that nickel made carbon elimination easier.     

Thermal and structural characterization of SrTi1-xNdxO3

Sr(Ti,Nd)O₃ was synthesized in order to evaluate the influence of the amount of neodymium on the thermal and structural properties of SrTiO₃. The synthesis was carried out using the polymeric precursor method. A small mass gain was observed for the SrTiO₃ and SrTi_0.98Nd_0.02O₃ samples accompanied by an exothermic peak in the DTA curves. Other steps at higher temperatures are assigned to the combustion of the organic material and carbonate. Elimination of defects by previous calcination of the precursors is responsible by the short and long range ordering of the perovskite. Cubic phase was obtained for undoped and doped SrTiO₃.     

Implementation of the quality management system at the Laboratory of Radiological Protection and Safety (LPSR) in Portugal

The paper describes the activities carried out for the implementation of the quality management system (QMS) at the Laboratory of Radiological Protection and Safety (LPSR) in Portugal in order to achieve the management and technical requirements of ISO/IEC 17025:2005 and to get the accreditation for ten tests. The implementation of the QMS based on this international standard allowed LPSR to improve the methods, to identify problems, to implement preventive and corrective actions, to generate valid results and to achieve a stable level of high-quality output recognized by an independent body in the scope of waters, metrology, radiation and radiochemistry.     

Design and Sensing Properties of a Self‐Assembled Supramolecular Oligomer

Supramolecular polymers are a class of macromolecules stabilized by weak non‐covalent interactions. These self‐assembled aggregates typically undergo stimuli‐induced reversible assembly and disassembly. They thus hold great promise as so‐called functional materials. In this work, we present the design, synthesis, and responsive behavior of a short supramolecular oligomeric system based on two hetero‐complementary subunits. These “monomers” consist of a tetrathiafulvalene‐functionalized calix[4]pyrrole (TTF‐C[4]P) and a glycol diester‐linked bis‐2,5,7‐trinitrodicyanomethylenefluorene‐4‐carboxylate (TNDCF), respectively. We show that when mixed in organic solvents, such as CHCl₃, CH₂ClCH₂Cl, and methylcyclohexane, supramolecular aggregation takes place to produce short oligomers stabilized by hydrogen bonding and donor–acceptor charge‐transfer (CT) interactions. The self‐associated materials were characterized by ¹H NMR and UV/Vis/NIR absorption spectroscopy, as well as by concentration‐ and temperature‐dependent absorption spectroscopy and dynamic light scattering (DLS) analyses of both the monomeric and oligomerized species. The self‐associated system produced from TTF‐C[4]P and TNDCF exhibits a concentration‐dependent aggregation behavior typical of supramolecular polymers. Further support for the proposed self‐assembly came from theoretical calculations. The fluorescence emitting properties of TNDCF are quenched under conditions that promote the formation of supramolecular aggregates containing TTF‐C[4]P and TNDCF. This quenching effect has been utilized as a probe for the detection of substrates in the form of anions (i.e., chloride) and nitroaromatic explosives (i.e., 1,3,5‐trinitrobenzene). Specifically, the addition of these substrates to mixtures of TTF‐C[4]P and TNDCF produced a fluorescence “turn‐on” response.     

Determination of the mineral composition of fresh bovine milk from the milk-producing areas located in the State of Sergipe in Brazil and evaluation employing exploratory analysis

In this work, the mineral composition of fresh bovine milk obtained from the milk-producing areas of the Brazilian State of Sergipe was examined. A dry-ashed digestion method and the ICP OES technique were used for the quantification of mineral elements (e.g., Ca, Mg, K, Na, P, Sr and Zn) in 27 samples of milk collected from properties located in milk-producing areas around Nossa Senhora da Glória. The following ranges of values (% m/v) were obtained: 0.063 to 0.117 for Ca; 0.060 to 0.114 for P; 0.024 to 0.064 for Na; and 0.087 to 0.164 for K. The ranges of values (mg L^− 1) for the other mineral elements were also found: 0.68 to 1.89 for Sr; 2.46 to 5.73 for Zn; and 54.2 to 109.9 for Mg. Additionally, the exploratory evaluation of the 27 milk samples was performed using principal component analysis (PCA) involving seven variables dealing with the effect of different management systems (conventional and organic) on milk composition. The results show that there are indeed differences between the mineral composition of milk from properties that use organic practices and those that use conventional management practices.     

Determination of Hg and Pb in compact fluorescent lamp by slurry sampling inductively coupled plasma optical emission spectrometry

Mercury and lead were determined in an extraction solution applied to compact fluorescent lamps by axial view inductively coupled plasma optical emission spectrometry (ICP OES). The solution contained 50% v/v HNO₃ and 10% v/v H₂O₂. The compact fluorescent lamps were treated by removing the socket and breaking the rest of the lamp inside the solution, followed by placing the mixture in an ultrasonic bath for 1 h. The mixture was filtrated in a coarse paper filter and the resulting extraction slurry was analyzed. The determination of Pb in the slurry required calibration by the analyte addition technique, while for Hg, external calibration was adequate. The quantification limits (10 s, n = 7), for Hg (194.164 nm) and Pb (220.353 nm) were, respectively, 10 and 30 µg per lamp. Analysis of spiked samples demonstrated reasonable accuracy of the method, with recoveries in the range from 99 to 120% for Hg and from 91 to 107% for Pb. Fifteen analyzed samples showed Hg masses per lamp in the range from 1.6 to 27 mg, and six samples were above the limit allowed by the European Community that is 5 mg per compact lamp. The values for Pb were between 0.07 and 0.75 mg per lamp. By filtrating the slurry in a membrane filter, and analyzing the resulting solution, it was found that all Hg was extracted to the liquid phase of the slurry, while a fraction of about 40% m/v of Pb is retained in the solid particles. The lamp cover glass, after extraction of the phosphor layer, was also analyzed for Hg and Pb. The concentration of Hg in the glass is quite low; however, the Pb content is high.     

Chemical constituents of the bark of Dipteryx alata vogel, an active species against Bothrops jararacussu venom

The effect of four sub-extracts prepared from the lyophilized hydroalcoholic bark of Dipteryx alata (Leguminosae-Papilionoideae) dissolved in a methanol-water (80:20) mixture through a liquid-liquid partition procedure has been investigated against the neuromuscular blockade of the venom of the snake Bothrops jararacussu. The active CH?Cl? sub-extract has been extensively analyzed for its chemical constituents, resulting in the isolation of four lupane-type triterpenoids: lupeol, lupenone, 28-hydroxylup-20(29)-en-3-one, betulin, nine isoflavonoids: 8-O-methylretusin, 7-hydroxy-5,6,4'-trimethoxyisoflavone, afrormosin, 7-hydroxy-8,3',4'-trimethoxyisoflavone, 7,3'-dihydroxy-8,4'-dimethoxyisoflavone, odoratin, 7,8,3'-trihydroxy-4'-methoxyisoflavone, 7,8,3'-trihydroxy-6,4'-dimethoxyisoflavone, dipteryxin, one chalcone: isoliquiritigenin, one aurone: sulfuretin and three phenolic compounds: vanillic acid, vanillin, and protocatechuic acid. Their chemical structures were elucidated on the basis of spectroscopic analysis, including HRMS, 1D- and 2D-NMR techniques.     

Micro energy dispersive X-ray fluorescence analysis of polychrome lead-glazed Portuguese faiences

Several glazed ceramic pieces, originally produced in Coimbra (Portugal), were submitted to elemental analysis, having as premise the pigment manufacture production recognition. Although having been produced in Coimbra, their location changed as time passed due to historical reasons. A recent exhibition in Coimbra brought together a great number of these pieces and in situ micro Energy Dispersive X-ray Fluorescence (µ-EDXRF) analyses were performed in order to achieve some chemical and physical data on the manufacture of faiences in Coimbra.