Isolation of phenolic compounds from hop extracts using polyvinylpolypyrrolidone: Characterization by high-performance liquid chromatography–diode array detection–electrospray tandem mass spectrometry

The aim of the present work was the development of a suitable methodology for the separation and determination of phenolic compounds in the hop plant. The developed methodology was based on the sample purification by adsorption of phenolic compounds from the matrix to polyvinylpolypyrrolidone (PVPP) and subsequent desorption of the adsorbed polyphenols with acetone/water (70:30, v/v). At last, the extract was analyzed by HPLC–DAD and HPLC–ESI-MS/MS. The first phase of this work consisted of the study of the adsorption behavior of several classes of phenolic compounds (e.g. phenolic acids, flavonols, and flavanols) by PVPP in model solutions. It has been observed that the process of adsorption of the different phenolic compounds to PVPP (at low concentrations) is differentiated, depending on the structure of the compound (number of OH groups, aromatic rings, and stereochemistry hindrance). For example, within the phenolic acids class (benzoic, p-hydroxybenzoic, protocatechuic and gallic acids) the PVPP adsorption increases with the number of OH groups of the phenolic compound. On the other hand, the derivatization of OH groups (methylation and glycosylation) resulted in a greatly diminished binding. The use of PVPP revealed to be very efficient for adsorption of several phenolic compounds such as catechin, epicatechin, xanthohumol and quercetin, since high adsorption and recovery values were obtained. The methodology was further applied for the extraction and isolation of phenolic compounds from hops. With this methodology, it was possible to obtain high adsorption values (≥80%) and recovery yield values (≥70%) for the most important phenolic compounds from hops such as xanthohumol, catechin, epicatechin, quercetin and kaempferol glycosides, and in addition it allows the identification of about 30 phenolic compounds by HPLC–DAD and HPLC–ESI-MS/MS.     

Furo[2,3‐d]pyrimidines and Oxazolo[5,4‐d]pyrimidines as Inhibitors of Receptor Tyrosine Kinases (RTK)

Receptor tyrosine kinases such as VEGFR2 (vascular endothelial growth factor receptor 2, KDR) or EGFR (epidermal growth factor receptor) play crucial roles in a variety of diseases, such as cancer. Recently, some pyrrolopyrimidines were shown to be potent EGFR inhibitors. Therefore, new types of oxazolo[5,4‐d]pyrimidines and furo[2,3‐d]pyrimidines were synthesized (Schemes 1 and 2). Appropriately substituted derivatives of these classes of compounds inhibited VEGFR2 and EGFR with IC₅₀ values in the low nanomolar range (see Table). Generally, the furopyrimidines were somewhat more active than the oxazolopyrimidines. The best inhibitors, 20m, 20p , and 20r , had an IC₅₀ of 3 nM towards EGFR and showed a good selectivity, being distinctly less active towards VEGFR2.     

Carbometallate: Komplexe Anionenverbände [MoC4/26—] in der Kristallstruktur von Pr[MoIIC2]

Carbometalates: Complex Anions equation/tex2gif-stack-4.gif [MoC_4/2^6—] in the Crystal Structure of Pr equation/tex2gif-stack-5.gif [Mo^IIC₂] Criteria for the existence of carbometalates are established and discussed in a broader context. The concept is then applied to the novel compound Pr₂[MoC₂], which is characterized by chemical analyses, X‐ray diffraction and metallography. The crystal structure (tetragonal, P4₂/mnm, Z = 4, a = 581.29(8) pm, c = 1032.53(14) pm) consists of layered polyanions equation/tex2gif-stack-6.gif[MoC_4/2^6—] of distorted vertex and edge sharing MoC₄ tetrahedra. Praseodymium is also in a distorted tetrahedral coordination by carbon. The physical properties show “bad metal” behaviour and localized magnetic 4f‐moments in agreement with the existence of Pr³⁺‐species. A detailed bonding analysis using both the electron localization function ELF and the COHP method justifies the interpretation of the title compound as a carbomolybdate(II).     

Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

The German bakery waste incident; use of a combined approach of screening and confirmation for dioxins in feed and food

During the last six years several incidents have occurred with dioxins in feed, stressing the need for rapid screening methods for these compounds. The most recent incident was the contamination of bakery waste used for animal feed due to the use of waste wood for drying of the material. In addition to Germany, the material was also shipped to the Netherlands. Levels up to 12 ng TEQ/kg have been detected, being about 15 times over the current limit of 0.75 ng TEQ/kg. In the Netherlands a combined strategy of screening with the CALUX-bioassay and the HRGC/HRMS confirmatory method was used to rapidly control the incident. Pigs were contaminated by the incident but only to a very limited extent. Despite the rather low limits for pig meat, the CALUX bioassay showed excellent performance, once again confirming the value of this assay.     

Electrochemical sensor for the detection and presumptive identification of quinolone and tetracycline residues in milk

A novel application of an electrochemical biosensor is here employed as analytical method for the detection and presumptive identification of antimicrobial drug residues in milk. The measurement was based on carbon dioxide production rate in relation to inhibition of microbial grow (Escherichia coli ATCC 11303). In this pilot study quinolone and tetracycline residues have been taken into consideration because use of these last in livestock production has been identified as area of particular concern. The experimental approach and analytical method developed appear adequate for the purpose, and compared to older screening methods as, for example, the microbial inhibition assays and immunoassays, offers the advantages of (i) very short analysis time (about 120 min); (ii) smaller sample amount (approximately 0.5 mL); (iii) no sample treatment (iv) good precision; and (v) the possibility of following, in a continuous manner, the inhibition process. Moreover, sensitivity of electrochemical biosensor system is resulted very high considering that for all quinolones and tetracyclines investigated it has been possible detect a residue concentration below or equal to 25 μg L⁻¹. Under this point of view, it must be considered that the maximum residue limits fixed by UE for quinolones and tetracyclines in milk are, at present, all higher of this concentration.     

Structure and dynamics of self-assembled poly(ethylene glycol) based coiled-coil nano-objects.

Herein we describe the structure and dynamics of self-assembled nano-objects generated from poly(ethylene glycol) based (PEG-ylated) coiled-coil hybrid block copolymers. Electron paramagnetic resonance (EPR) experiments on spin-labeled samples provided a strong indication for a parallel alignment of the peptide helices in at least the dimeric coiled-coil nano-object and indicated that the PEG chains are folded rather closely around the peptide core of the nano-objects. The EPR results were supported by AFM studies, which revealed the presence of discrete nanosized objects in thin, spin cast films of the block copolymers on mica substrates. Since their size and structure may be engineered via directed mutations in the amino acid sequence, these nano-objects may be interesting building blocks for the development of supramolecular materials with various potential applications.     

Low-lying electronic excitations and optical absorption spectra of the black dye sensitizer: a first-principles study

We report on ab-initio calculations of the electronic structure and optical absorption response of the black dye sensitizer in gas phase. We show that, despite the large size of this molecule, the second-order multiconfiguration quasi-degenerate perturbation theory (MC-QDPT) can be used to calculate vertical excitation energies, oscillator strengths and optical absorption spectra. The zeroth-order reference states entering perturbation calculations are complete active space (CAS) configuration interaction (CI) wave functions computed for 12 active electrons distributed in 12 active orbitals. We found that the CI approach is not enough for taking into account the strong dynamical correlation effects in this system. In fact, the excitation energies of the CAS-CI target states are strongly renormalized by the MC-QDPT calculations. In the calculated absorption spectra, the analysis of the perturbed wavefunctions revealed that the stronger absorption bands correspond to metal-to-ligand and ligand-to-ligand charge transfer processes. Comparison with independent time-dependent extension (TDDFT) calculations performed with different functionals shows that corrections to the long-range behavior of the functional is pivotal to achieve agreement with the MC-QDPT results.     

InIII-Phthalocyanine: Darstellung,Eigenschaften und Kristallstruktur von Tetra(n-butyl)ammonium-cis-di(nitrito-O,O′)phthalocyaninato(2–)indat(III)

In^III-Phthalocyanines: Synthesis, Properties, and Crystal Structure of Tetra(n-butyl)ammonium-cis-di(nitrito-O,O')phthalocyaninato(2–)indate(III) [In(Cl)Pc^2?] reacts with (ⁿBu₄N)NO₂ in acetone yielding green-blue (ⁿBu₄N)^cis[In(NO₂)₂Pc^2?], which crystallizes in the monoclinic space group P2₁/n (No. 14). Both nitrite anions are coordinated as chelating nitrito-O,O'(NO₂) ligands to In^III in cis-geometry. Consequently In^III is octa-coordinated within a distorted “quadratic” antiprism and directed towards the Pc^2?-ligand. One of the NO₂ ligands has equivalent N? O bonds similar to free nitrite, while the other has asymmetric N? O bonds. Both (In,O,N,O) rings are approximately planar with a dihedral angle of 80°. The Pc^2? ligand is distorted in an asymmetrically convex manner. Partially overlapping pairs of Pc^2? ligands related by an inversion center form double layers, which are separated by layers containing the (ⁿBu₄N)⁺ cations. The cyclic voltammogram shows three electrode processes, which are assigned to the redox pairs: Pc^3?/Pc^2? (?0.94 V) < In^I/In^III (-0.78 V) < Pc^2?/Pc^? (0.64 V). The UV-VIS-NIR spectra and vibrational spectra are discussed.