Recovery and sporicidal resistance of various B. subtilis spore preparations on porcelain penicylinders compared with results from AOAC test methods

Sporicidal test results obtained from carriers inoculated with 4 types of defined Bacillus subtilis spore preparations were compared with the standard AOAC sporicidal test using soil extract nutrient broth (SENB) B. subtilis 19659 spores. Recoveries of spores inoculated on penicylinders from B. subtilis clean spores (washed and suspended in water) and B. subtilis 19659 spores inoculated from culture filtrates according to the AOAC method were compared. Spores were exposed to 6 concentrations (0.5-3.0% w/v) of glutaraldehyde in phosphate buffer (pH 7.5) for 10 h. Concentrations were established by titrimetry and liquid chromatography. Recoveries of surviving spores were determined for 3 types of clean B. subtilis var. niger preparations, one clean B. subtilis 19659 preparation, and the SENB B. subtilis 19659 filtrates. Spore carriers, inoculated by the standard AOAC protocol, resulted in as much as a 2-log number difference in runs 1-12, but not more than 0.5 log number for each clean spore preparation. The SENB spores varied most in resistance to glutaraldehyde, with no growth in recovery media from 3 different batches of 1, 1.5, and 2% glutaraldehyde. Separate batches of SENB preparations of B. subtilis 19659 were resistant and destroyed by 1.0% glutaraldehyde, with 3.98 and 6.0 log numbers of spores on penicylinders, respectively. Clean spore preparations of B. subtilis 19659 on porcelain penicylinders were more resistant to glutaraldehyde than were SENB spores. Nutrient agar/Mg/Ca and nutrient agar/Mg spore preparations of B. subtilis var. niger showed the most uniform resistance to glutaraldehyde. Spores with calcium added showed increased resistance to glutaraldehyde. B. subtilis 19659 spores from the Columbia broth spore preparation were the most resistant and were recovered after exposure to 3.0% glutaraldehyde.     

The dissociation quotients of formic acid in sodium chloride solutions to 200°C

The dissociation quotients of formic acid were measured potentiometrically from 25 to 200°C in NaCl solutions at ionic strengths of 0.1, 0.3 1.0, 3.0, and 5.0 mol-kg^–1. The experiments were carried out in a concentration cell with hydrogen electrodes. The resulting molal acid dissociation quotients for formic acid, as well as a set of infinite dilution literature values and a calorimetrically-determined enthalpy of reaction, were fitted by an empirical equation involving an extended Debye Hückel term and seven adjustable parameters involving functions of temperature and ionic strength. This regressional analysis yielded the following thermodynamic quantities for 25°C: logK=–3.755±0.002, H^o=–0.09±0.15 kJ-mol^–1, S^o=–72.2±0.5 J-K^–1-mol^–1, and C _p ^o =–147±4 J-K^–1-mol^–1. The isocoulombic form of the equilibrium constant is recommended for extrapolation to higher temperatures.     

Synthesis of mixed acid anhydrides from methane and carbon dioxide in acid solvents

[reaction: see text] The reaction of CH(4) with CO(2) has been performed in anhydrous acids using VO(acac)(2) and K(2)S(2)O(8) as promoters. NMR analysis establishes that the primary product is a mixed anhydride of acetic acid and the acid solvent. In sulfuric acid, the overall reaction is CH(4) + CO(2) + SO(3) --> CH(3)C(O)-O-SO(3)H. Hydrolysis of the mixed anhydride produces acetic acid and the solvent acid. When trifluoroacetic acid is the solvent, acetic acid is primarily formed via the reaction CH(4) + CF(3)COOH --> CH(3)COOH + CHF(3).     

InIII-Phthalocyanine: Darstellung,Eigenschaften und Kristallstruktur von Tetra(n-butyl)ammonium-cis-di(nitrito-O,O′)phthalocyaninato(2–)indat(III)

In^III-Phthalocyanines: Synthesis, Properties, and Crystal Structure of Tetra(n-butyl)ammonium-cis-di(nitrito-O,O')phthalocyaninato(2–)indate(III) [In(Cl)Pc^2?] reacts with (ⁿBu₄N)NO₂ in acetone yielding green-blue (ⁿBu₄N)^cis[In(NO₂)₂Pc^2?], which crystallizes in the monoclinic space group P2₁/n (No. 14). Both nitrite anions are coordinated as chelating nitrito-O,O'(NO₂) ligands to In^III in cis-geometry. Consequently In^III is octa-coordinated within a distorted “quadratic” antiprism and directed towards the Pc^2?-ligand. One of the NO₂ ligands has equivalent N? O bonds similar to free nitrite, while the other has asymmetric N? O bonds. Both (In,O,N,O) rings are approximately planar with a dihedral angle of 80°. The Pc^2? ligand is distorted in an asymmetrically convex manner. Partially overlapping pairs of Pc^2? ligands related by an inversion center form double layers, which are separated by layers containing the (ⁿBu₄N)⁺ cations. The cyclic voltammogram shows three electrode processes, which are assigned to the redox pairs: Pc^3?/Pc^2? (?0.94 V) < In^I/In^III (-0.78 V) < Pc^2?/Pc^? (0.64 V). The UV-VIS-NIR spectra and vibrational spectra are discussed.     

Oscillator Synchronisation under Arbitrary Quasi-periodic Forcing

We study the problem of existence of response solutions for a real-analytic one-dimensional system, consisting of a rotator subject to a small quasi-periodic forcing with Bryuno frequency vector. We prove that at least one response solution always exists, without any assumption on the forcing besides smallness and analyticity. This strengthens the results available in the literature, where generic non-degeneracy conditions are assumed. The proof is based on a diagrammatic formalism and relies on renormalisation group techniques, which exploit the formal analogy with problems of quantum field theory; a crucial role is played by remarkable identities between classes of diagrams.     

Combined prostate diffusion tensor imaging and dynamic contrast enhanced MRI at 3T — quantitative correlation with biopsy

The purpose of this work was to compare diagnostic accuracy of Diffusion Tensor Imaging (DTI), dynamic contrast-enhanced magnetic resonance imaging (DCE MRI) and their combination in diagnosing prostate cancer. Twenty-five patients with clinical suspicion of prostate cancer underwent MRI, prior to transrectal ultrasound-guided biopsies. MRI data were correlated to biopsy results. Logistic regression models were constructed for the DTI parameters, DCE MRI parameters, and their combination. The areas under the receiver operator characteristic curves (AUC) were compared between the models. The nonparametric Wilcoxon signed rank test was used for statistical analysis. The sensitivity and specificity values were respectively 81% (74–87%) and 85% (79–90%) for DTI and 63% (55–70%) and 90% (85–94%) for DCE. The combination “DTI or DCE MRI” had 100% (97–100%) sensitivity and 77% (69–83%) specificity, while “DTI and DCE MRI” had 44% (37–52%) sensitivity and 98% (94–100%) specificity. The AUC for DTI+DCE parameters was significantly higher than that for either DTI (0.96 vs. 0.92, P=.0143) or DCE MRI parameters (0.96 vs. 0.87, P=.00187) alone. In conclusion, the combination of DTI and DCE MRI has significantly better accuracy in prostate cancer diagnosis than either technique alone.     

Effects of Reaction Conditions on the Plasma Polymerization of Ethylene

Abstract

Ehylene can be polymerized at low pressures in a radio-frequency glow discharge. The form of the resulting polymer may be a powder at low pressure (1 to 2 Torr) and low monomer feed rate (10 to 40 cc/min), a colorless film at low pressure and high feed rate (70 to 90 cc/min), or an oil at high pressure (4 to 5 Torr) and high feed rate. The powder and film forms of plasma-polymerized ethylene are insoluble in common organic solvents, indicating a highly cross-linked structure. The oily products, however, are soluble in acetone and xylene. Chemical evidence indicates that the oil is most likely composed of highly branched oligomers of ethylene. Mass spectrometric analysis of the gaseous effluents show that under film-forming conditions the only hydrocarbon species observable are those derived from ethylene. The powder- and oil-forming conditions, on the other hand, yielded oligomeric species. On the basis of this evidence, a mechanism for the plasma-polymerization of ethylene is proposed.     

Analysis of polyfluoroalkyl substances and bisphenol A in dried blood spots by liquid chromatography tandem mass spectrometry

Dried blood spots (DBS), collected as part of the newborn screening program (NSP) in the USA, is a valuable resource for studies on environmental chemical exposures and associated health outcomes in newborns. Nevertheless, determination of concentrations of environmental chemicals in DBS requires assays with great sensitivity, as the typical volume of blood available on a DBS with 16-mm diameter disc is approximately 50 μL. In this study, we developed a liquid–liquid extraction and high-performance liquid chromatography/tandem mass spectrometry method for the detection of perfluorooctanesulfonate (PFOS), perfluorooctanoate (PFOA), and bisphenol A (BPA) in DBS. The method was validated for accuracy, precision, and sensitivity, by spiking of target chemicals at different levels on Whatman 903 filter cards, which is used in the collection of DBS by the NSP. Contamination arising from collection, storage, and handling of DBS is an important issue to be considered in the analysis of trace levels of environmental chemicals in DBS. For the evaluation of the magnitude of background contamination, field blanks were prepared from unspotted portions of DBS filter cards collected by the NSP. The method was applied for the measurement of PFOS, PFOA, and BPA in 192 DBS specimens provided by NSP of New York State. PFOS and PFOA were detected in 100 % of the specimens analyzed. The concentrations of PFOS and PFOA measured in DBS were similar to those reported earlier in the whole blood samples of newborns. BPA was also found in 86 % of the specimens at concentrations ranging from 0.2 to 36 ng/mL (excluding two outliers). Further studies are needed to evaluate the sources of BPA exposures and health outcomes in newborns.