Stability study of simvastatin under hydrolytic conditions assessed by liquid chromatography

In this work, a liquid chromatography stability-indicating method was developed and applied to study the hydrolytic behavior of simvastatin in different pH values and temperatures. The selected chromatographic conditions were a C18 column; acetonitrile-28 mM phosphate buffer solution, pH 4 (65 + 35) as the mobile phase; 251 degrees C column temperature; and flow rate 1 mL/min. The developed method exhibited an adequate repeatability and reproducibility (coefficient of variation 0.54 and 0.74%, respectively) and a recovery higher than 98%. Furthermore, the detection and quantification limits were 9.1 x 10(-7) and 2.8 x 10(-6) M, respectively. The degradation of simvastatin fitted to pseudo-first order kinetics. The degradation was pH dependent, being much higher at alkaline pH than at acid pH. Activation energy, kinetic rate constants (k) at different temperatures, the half life (t1/2) and the time for 10% degradation to occur (t90) values are also reported.     

表面修饰二氧化锡纳米微晶的制备与表征

制备了硅烷偶联剂KH-570表面修饰的SnO2纳米微晶，通过FT-IR、XPS、TEM和TG-DTA对其结构和表面特性进行表征和研究. FT-IR和XPS分析结果确证了KH-570与SnO2表面是以化学键合或物理吸附方式相结合,粒子表面存在酯基等有机官能团的红外吸收特征；观测到KH-570中Si原子的Si2s和Si2p谱线. TEM分析表明，表面修饰反应增强了SnO2纳米微晶的疏水性和分散性.由XPS和TG的实测数据探讨了纳米粒子具有较低包覆量的可能原因.     

Preparation and Characterization of Nanoscopic Organic Semiconductor of Oxovanadium Phthalocyanine

Nanoscopic particles of oxovanadium phthalocyanine (VOPc, phase-II) with different particle sizes are prepared by aggregation of VOPc molecules in the presence of surfactants for the first time. A size effect in the region of nanoscale was observed in the UV-visible spectra. The photoconductivity of the nanoscopic VOPc is much higher than that of bulk VOPc. Copyright 1999 Academic Press.     

Quinine/selectfluor combination induced asymmetric semipinacol rearrangement of allylic alcohols: an effective and enantioselective approach to alpha-quaternary beta-fluoro aldehydes

A quinine/Selectfluor combination inducing rearrangement reaction of allylic alcohols was discovered, which involved a moderate yield with good enantioselective construction of alpha-quaternary carbon center and beta-fluoro aldehyde under base condition.     

Mechanism of TiO2-assisted photocatalytic degradation of dyes under visible irradiation: photoelectrocatalytic study by TiO2-film electrodes

Photoelectrocatalytic degradation of various dyes under visible light irradiation with a TiO(2) nanoparticles electrode has been investigated to reveal the mechanism for TiO(2)-assisted photocatalytic degradation of dyes. The degradation of both cationic and anionic dyes at different biases, including the change in the degradation rate of the dyes and the photocurrent change with the bias potential, the degraded intermediates, the voltage-induced adsorption of dyes, the accumulation of electrons in the TiO(2) electrode, the effect of various additives such as benzoquinone (BQ) and N,N-dimethyl aniline (DMA), and the formation of active oxygen species such as O(2)(*-) and H(2)O(2) were examined by UV-visible spectroscopy, HPLC, TOC, and spin-trap ESR spectrometry. It was found that the dyes could controllably interact with the TiO(2) surface by external bias changes and charging of dyes. The cationic dyes such as RhB and MG underwent efficient mineralization at negative bias, but the N-dealkylation process predominated at positive bias under visible light irradiation. The discolorations of the anionic dyes SRB and AR could not be accelerated significantly at either negative or positive bias. At a negative bias of -0.6 V vs SCE, O(2)(*-) and dye(*+) were formed simultaneously at the electrode/electrolyte interface during degradation of cationic RhB. In the case of anionic dyes, however, it is impossible for the O(2)(*-) and dye cationic radical to coexist at the electrode/electrolyte surface. Experimental results imply both the superoxide anionic radical and the dye cationic radical are essential to the mineralization of the dyes under visible light-induced photocatalytic conditions.     

Determination of dispersity of crushed granite

Summary Experimental crushed granite column breakthrough curves, using ⁹⁹Tc as spike tracer and ³H as invariant tracer, were analyzed by different linear regression techniques. Dispersity of crushed granite and the retardation factor of ⁹⁹TcO₄^- on the crushed granite were determined simultaneously by one linear regression. Dispersity of crushed granite was also obtained with ³H as invariant tracer by the other linear regression. The dispersities found by spike source and invariant source methods are compared. Experimental results show that the dispersity found by the spike source method is close to that found by the invariant source method. This indicates that dispersity is only a characteristic of the dispersion medium.     

ZrO2纳米粉末复合羊毛纤维研究

ＺｒＯ_２纳米粉末复合羊毛纤维研究陈代荣，樊悦朋（山东大学化学系济南２５０１００）关键词ＺｒＯ_２纳米粉末，羊毛纤维，复合纤维由陶瓷粉末和天然纤维形成的复合纤维的强度、织品的保暖性、抗起球性及防缩性能等均有所提高，报道较多的是微米级陶瓷粉末（粒径０．５...     

Triterpenoid Saponins from Schefflera arboricola

Four new triterpenoid saponins, named scheffarboside A – D ( 1 – 4 ), along with five known saponins were isolated from the stems of Schefflera arboricola. The structures of the four new saponins were determined as 3‐O‐(O‐β‐glucuronopyranosyl‐(1 → 3)‐O‐α‐rhamnopyranosyl‐(1 → 2)‐α‐arabinopyranosyl)oleanolic acid ( 1 ), 3‐O‐(O‐α‐arabinopyranosyl‐(1 → 4)‐O‐α‐arabinopyranosyl‐(1 → 3)‐O‐α‐rhamnopyranosyl‐(1 → 2)‐α‐arabinopyranosyl)oleanolic acid ( 2 ), 3‐O‐(O‐α‐arabinopyranosyl‐(1 → 4)‐O‐α‐arabinopyranosyl‐(1 → 3)‐O‐α‐rhamnopyranosyl‐(1 → 2)‐α‐arabinopyranosyl)hederagenin ( 3 ), 3‐O‐(O‐α‐arabinopyranosyl‐(1 → 4)‐O‐α‐arabinopyranosyl‐(1 → 3)‐O‐α‐rhamnopyranosyl‐(1 → 2)‐α‐arabinopyranosyl)oleanolic acid O‐α‐rhamnopyranosyl‐(1 → 4)‐O‐β‐glucopyranosyl‐(1 → 6)‐β‐glucopyranosylester ( 4 ), respectively, on the basis of spectroscopic and chemical degradation methods.     

硼离子对铕掺杂SiO2干凝胶发光性能的影响

采用溶胶-凝胶法制备了Al单掺和B，Al共掺的Eu掺杂SiO2干凝胶。利用荧光光谱、IR，XRD，DSC，TG／DTG等技术研究了硼离子、退火温度对样品发光性质的影响。经500℃以上退火处理用248nm激发的样品，产生Eu^3＋离子^5D0→^7FJ的特征发射，^5D0→^7F1的跃迁分裂为两个峰。比较615nm处的发光强度，掺硼酸样品的发光强度是不加硼酸发光强度的3．3倍。这是因为B离子的加入，在材料中形成了Si—O—B键，破坏了网络的对称性，加强了Eu^3＋的红光发射。当退火温度上升到850℃用350nm激发时，样品有很强的Eu^2＋蓝光发射。Al单掺的发射中心在437nm处，发射半峰宽约为70nm，而B，Al共掺样品的发光中心蓝移到425nm处，单掺样品的蓝光强度几乎是共掺样品强度的2倍。这是由于硼酸的加入改变了基质的网络结构，从而导致单掺和共掺样品发射峰位和强度的改变。     

C36填充单壁碳纳米管的结构和电子性质

The structures and electronic properties for C36 encapsulated in four single-wall armchair carbon nanotubes (C36@(n,n), n=6-9) were calculated using ab initio self-consistent field crystal orbital method based on density functional theory. The calculations show that the interwall spacing between the carbon nanotube and C36 plays an important role in the stabilities of resultant structures. The optimum interwall spacing is about 0.30 nm and the tubes can be considered as inert containers for the encapsulated C36. The Fermi levels and relative position of energy bands also have something to do with the interwall spacing. The shifts of Fermi level and C36-derived electron states modulate the electron properties of these structures. The extra electrons fill the bands of C36@(8,8) with the optimum interwall spacing almost in a rigid-band manner.