Electro-initiated cationic polymerizations-VI: Anodic electrochemical behaviour and direct electropolymerization of anethole in 1,2-dichloroethane

A study has been made of the cationic electropolymerization of trans-anethole initiated by a direct electron transfer mechanism at a Pt anode in 1,2-dichloroethane solution with tetrabutylammonium perchlorate as supporting electrolyte. The electrochemical behaviour of the system has been preliminarily investigated by voltammetry at rotating and stationary Pt electrode and also by chronoamperometry. The results are consistent with an ECE oxidation process of anethole with formation first of a radical cation and finally of a dication. Polymerization experiments by electrolysis at the oxidation potential of the monomer have been also carried out both under continuous electrolysis and with short initial pulses of current. The results have been analysed and some kinetic parameters of the system have been evaluated.     

Rm Values, retention times and π values of a series of potentially mutagenic nitroimidazo[2,1-b]thiazoles

The R_m values and retention times of a series of nitroimidazo[2,1-b]thiazoles were obtained by means of thin-layer and high-performance liquid chromatography, respectively. Extrapolated R_m and log k′ values were correlated in a statistically significant way with π values calculated according to the literature.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Hydrogen bonds of RNA are stronger than those of DNA, but NMR monitors only presence of methyl substituent in uracil/thymine

Recently, Vakonakis and LiWang (J. Am. Chem. Soc. 2004, 126, 5688) reported experimental evidence for stronger hydrogen bonds in RNA A:U than in DNA A:T base pairs, which was based on differences in NMR shielding for adenine C2. We have analyzed the proposed correlation between NMR shielding and hydrogen-bond strength using density functional theory. Although we agree with the conclusion that A:U is more strongly bound, we find no correlation between the hydrogen-bond strength and the NMR shielding of C2. Our study shows that NMR merely probes the presence/absence of the methyl group in thymine/uracil, without any relation to the strength of the hydrogen bonds involved. In other words, one cannot infer the Watson-Crick hydrogen-bond strength from the NMR shielding constant of adenine C2.     

Cation electrochemical stability in chloroaluminate ionic liquids

The electrochemical stability of 10 organic cations, which can be used in ionic liquids (IL), was investigated as solutes in acetonitrile (ACN). The stability of three of the salts, BenMe2EtNCl (salt III), 1-butyl-2-methyl pyrrolidium chloride (salt VI), and its structural isomer, BuMe2ProNCl (salt VII), were also compared in chloroaluminate ILs. The chloroaluminate ILs of salts VI and VII are investigated for the first time. The NaCl-neutralized ILs of salts VI and VII have melting points of 43.2 and 3.7 degrees C, respectively. The benzyl-substituted cation, salt III, was more easily reduced in ACN or as the neutral chloroaluminate IL than the alkyl-substituted cation, salt VII, due to the better leaving ability of the benzyl group. Mass spectroscopy measurements before and after electrolysis on the benzyl-substituted solutions confirmed that reduction involves the loss of an alkyl group. In ACN, salt VI was found to be the most difficult to reduce (1 mA/cm2 at -2.09 V) due to its cyclic structure. However, in the chloroaluminate IL, the pyrrolidinium cation was more easily reduced than salt III or its isomer, salt VII, resulting in an insoluble black deposit. This is consistent with the mass spectrometry data, which do not show formation of low-molecular-weight products, as in the reduction of salts III and VII. The IL of salt VII was the most stable in the presence of sodium. Sodium ions could be reduced and reoxidized with a maximum Coulombic efficiency of 94.1% versus 87.2% for salt VI. Reduction of the pyrrolidinium cation produces insoluble products, most likely through opening of the cyclic ring, and an inferior medium for sodium ion reduction compared to the benzyl- and butyl-substituted cations, even though reduction of the cation occurs at a more negative potential in acetonitrile.     

Separation of fluorescent 1,N6 ethenoderivatives of diadenosine polyphosphates and their enzymatic degradation products by reversed-phase high-performance liquid chromatography

Summary The retention, selectivity and elution order of fluorescent 1,N⁶-etheno derivatives of diadenosine polyphosphates and their enzymatic degradation products on octadecyl and phenyl-bonded silica columns have been studied as a function of mobile phase pH, ionic strength and organic modifier content. Good separations of the compounds of interest were achieved using mobile phases of around 0.1M potassium phosphate buffers at neutral pH containing approximately 10% methanol or 4% acetonitrile for C₁₈ columns and 5% methanol or 1.5% acetonitrile for phenyl columns. The data obtained were used to establish isocratic assays for diadenosine polyphosphate cleaving activities from chromaffin cells using Di(1,N⁶-ethenoadenosine) polyphosphates as fluorogenic substrate analogues followed by fluorescence detection.     

Mapping the sites for selective oxidation of guanines in DNA

The effective energy of a positive charge when it is localized at a specific guanine nucleobase in DNA was calculated using density functional theory. The results demonstrate that the efficiency of a guanine to act as a hole-trap in DNA strongly depends on the nature of the flanking nucleobases. The presence of a pyrimidine base at the 3' position adjacent to a guanine significantly increases the localization energy of the positive charge. The calculated distributions of a positive charge in sequences of two or three adjacent guanines, flanked by other nucleobases, provide an explanation for experimental literature data on the site-selective oxidation of DNA.     

Concentration and vertical distribution of plutonium and americium in Italian mosses and lichens

The plutonium and americium concentration and vertical distribution in some Italian mosses and lichens have been determined. The^239,240Pu,²³⁸Pu and²⁴¹Am concentration ranges in tree trunk lichens 0.83–1.87, 0.052–0.154 and 0.180–0.770 Bq/kg, respectively. The corresponding values in tree mosses are higher and more scattered ranging from 0.321 to 4.96, from 0.029 to 0.171 and from 0.200 to 1.93 Bq/kg. The mean²³⁸Pu/^239,240Pu and²⁴¹Am/^239,240Pu ratios are 0.088±0.037 and 0.38±0.13 in lichens and 0.091±0.072 and 0.54±0.16 in tree mosses. The Pu and Am concentrations are relatively low in terrestrial mosses. The^239,240Pu,²³⁸Pu and²⁴¹Am vertical distributions in a terrestrial moss core (Neckera Crispa) collected near Urbino (central Italy) show an exponential decrease with the height. On the contrary the²⁴¹Am vertical distribution in another terrestrial moss core (Sphagnum Compactum) collected in the Alps (northern Italy) shows an interesting peak at 16 cm which corresponds to the deposition of fallout from the nuclear weapon tests in 1960's. The²⁴¹Am movement upward and downward in the moss core is also studied. The results show once again that both mosses and lichens are very effective accumulators of Pu and Am and that they can be used as good biological indicators of the radionuclide airbome pollution from nuclear facilities and nuclear weapon tests. They can play a very impotant role in cycling naturally or artificially enhanced radionuclides in the atmosphere over long time scales.     

Poly(ethylene terephthalate) copolymers containing nitroterephthalic units. III. Methanolytic degradation

The methanolytic degradation of poly(ethylene terephthalate) (PET) copolymers containing nitroterephthalic units was investigated. Random poly(ethylene terephthalate‐co‐nitroterephthalate) copolyesters (PETNT) containing 15 and 30 mol % nitrated units were prepared from ethylene glycol and a mixture of dimethyl terephthalate and dimethyl nitroterephthalate. A detailed study of the influence of the nitro group on the methanolytic degradation rate of the nitrated bis(2‐hydroxyethyl) nitroterephthalate (BHENT) model compound in comparison with the nonnitrated bis(2‐hydroxyethyl) terephthalate (BHET) model compound was carried out. The kinetics of the methanolysis of BHENT and BHET were evaluated with high‐performance liquid chromatography and ¹H NMR spectroscopy. BHENT appeared to be much more reactive than BHET. The methanolytic degradation of PET and PETNT copolyesters at 80 °C was followed by changes in the weight and viscosity, gel permeation chromatography, differential scanning calorimetry, scanning electron microscopy, and ¹H and ¹³C NMR spectroscopy. The copolyesters degraded faster than PET, and the degradation increased with the content of nitrated units and occurred preferentially by cleavage of the ester groups placed at the meta position of the nitro group in the nitrated units. For both PET and PETNT copolyesters, an increase in crystallinity accompanied methanolysis. A surface degradation mechanism entailing solubilization of the fragmented polymer and consequent loss of mass was found to operate in the methanolysis of the copolyesters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2276–2285, 2002