Random Block Copolymers via Segment Interchange Olefin Metathesis

Polycarbonate/polyethylene random block copolymers (RBCs) have been produced using olefin metathesis catalysis in a process termed segment interchange metathesis. An olefin metathesis catalyst tolerant of polar functionality was added to reagent polycarbonate and polyethylene polymers which contained internal unsaturated carbon–carbon bonds. Subsequent metathesis occurred, segmenting the reagent polymers, resulting in RBCs. The block copolymers self-assembled into microphase structures which persisted into the melt state as determined by small angle X-ray scattering (SAXS).

     

Contributions to the Experimental Investigation of the Nascent Polymerisation of Ethylene on Supported Catalysts, 2

A series of experiments in a novel quench flow reactor was used to study the influence of the means of adding TEA to the catalyst, the reaction temperature and the hydrogen concentration on the kinetics and morphology of the nascent phase of the polymerisation of ethylene in heptane slurry. It was shown that regardless of the way in which the alkyl was added, an extremely rapid reaction rate was observed for the first few fractions of a second, but that precontacting the catalyst and the TEA cocatalyst led to a slightly higher initial rate. On the other hand, the nascent morphology of the particle/support complex was strongly influenced by the means of adding the alkyl, with precontacting of the two components leading to a better defined product. The influence of the temperature was found to be less significant; however, this was attributed to the particular catalyst.

     

Darstellung,Isolierung und Charakterisierung von Ba@C74

Preparation, Isolation, and Characterization of Ba@C₇₄ For the first time Ba@C₇₄ has been isolated in pure form. The title compound has been isolated from a raw material, produced in a radio‐frequency‐furnace, consisting of a mixture of fullerenes and endohedral Bariumfullerenes. Ba@C₇₄ was separated by two stage sublimation and subsequent high‐performance liquid chromatography (HPLC) using a Buckyprep column. The capacity factor for Ba@C₇₄ is 6.0. Its endohedral character has been deduced from the fragmentation pattern obtained by time‐of‐flight mass spectroscopy while the composition has been confirmed by comparison of calculated and measured isotopic pattern of the parent peak. Further characterization was performed by VIS/NIR‐spectroscopy and electron‐paramagnetic‐resonance spectroscopy (EPR).     

Transannular O-heterocyclization of twelve and thirteen membered trienes by methoxybromination procedure

The reaction of (E,E,Z)-cyclododeca-1.5,9-triene (1) with NBS and methanol gives bicyclic tetrahydrofuran derivatives (3) and (4) as well as usual 1,2-addition products while the related reaction with (Z,E,Z)-cyclotrideca-1,5,9-triene (7) leads to the bicyclic tetrahydropyran derivative (6), in both cases like O-heterocyclization products as the result of transannular participation of a methoxy group.     

Double indication in catalytic-kinetic analysis: simultaneous photometric and thermometric indication of the iodine-azide reaction in closed and flow systems

The iodine—azide reaction catalyzed by sulphur-containing compounds is followed simultaneously by optical and thermometric measurements in closed and flowing systems. In the closed system, thiosulphate can be determined in the range 32.4–324 μg ml^-1, by observing the turbidity caused by the nitrogen formed during the reaction and the temperature changes. With the flow apparatus, thiosulphate can be determined in the range 112–1120 μg ml^-1 by continuously mixing the sample and reagent solutions. H₂S in nitrogen 5–100 ppm) is measured by sweeping the gas into the reaction Cuvette. In a third flow procedure, H₂S is liberated continuously from sodium sulphide solutions (0.1–10 μg S^2- ml^-1) by ascorbic acid, and swept to the measuring cuvette with nitrogen.     

Characterization of moenomycin antibiotic complex by multistage MALDI-IT/RTOF-MS and ESI-IT-MS

Flavomycin is a commercially available antimicrobial growth promoter and an authorized additive for feeding stuffs in the EU and in the USA. As most antibiotically active products biosynthesized by microorganisms, it contains not only a single active compound but is a complex mixture of structurally closely related substances. Multistage matrix-assisted laser desorption/ionization-ion trap/reflectron time-of-flight mass spectrometry (MALDI-IT/RTOF-MS) and liquid chromatography-electrospray ionization-ion trap-mass spectrometry (LC-ESI-IT-MS) were utilized for a detailed analysis of the constituents of the Flavomycin complex based on low-energy collision induced dissociation (CID). An optimal sample preparation for negative ion vacuum MALDI-MS for this compound class was developed. The MALDI-IT/RTOF-MS2 and -MS3 analysis starting with the precursor [M - H]- ions of these interesting phosphoglycolipids, named moenomycins, yielded a large variety of product ions that facilitated the structural characterization of this class of compounds. Based on the derived CID fragmentation pathway of the five known major constituents, namely moenomycin A, moenomycin A12, moenomycin C4, moenomycin C3. and moenomycin C1, four not yet described moenomycin-type constituents could be characterized. They were assigned as 4F-demethyl-6E-O-de-beta-D-glucopyranosyl-moenomycin A, 6B-N-de(2-hydroxy-5-oxo-1-cyclopenten-1-yl)-moenomycin A, 6B-hydroxy-6B-de[N-(2-hydroxy-5-oxo-1-cyclopenten-1-yl)amino]-moenomycin A, and 6C-hydroxy-moenomycin A. In addition, a moenomycin A carrying an oxygen in the moenocinol-group was found, which is most probably a chemical degradation product. These new compounds were verified by LC-ESI-IT-MS.     

Triphenylene silanes for direct surface anchoring in binary mixed self-assembled monolayers

New triphenylene-based silanes 2-(ω-(chlorodimethylsilyl)-n-alkyl)-3,6,7,10,11-penta-m-alkoxytriphenylene 4 (Tm-Cn) with n = 8 or 9 and m = 7, 8, 9, 10, or 11 were synthesized, and their self-assembly behavior in the liquid state and at glass and silicon oxide surfaces was investigated. The mesomorphic properties of triphenylene silanes 4 (Tm-Cn) and their precursors 3 (Tm-Cn) were determined by differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and X-ray diffraction. From the small-angle X-ray scattering (SAXS) regime, a preferential discotic lamellar mesophase can be deduced, and wide-angle X-ray scattering (WAXS) highlights the liquid-like characteristics of the alkyl side chains. To transfer these bulk structural properties to thin films, self-assembled monolayers (SAMs) were obtained by adsorption from solution and characterized by water contact angle measurements, null ellipsometry, and atomic force microscopy (AFM). Employing the concentration as an additional degree of freedom, binary SAMs of 2-(ω-(chlorodimethylsilyl)-undecyl)-3,6,7,10,11-penta-decyloxytriphenylene 4 (T10-C11) were coassembled with chlorodecyldimethylsilane or chlorodimethyloctadecylsilane, and their capability as model systems for organic templating was evaluated. The structure of the resulting binary mixed SAMs was analyzed by water contact angle measurements, null ellipsometry, and X-ray reflectivity (XRR) in combination with theoretical modeling by a multidimensional Parratt algorithm and AFM. The composition dependence of film thickness and roughness can be explained by a microscopic model including the steric hindrance of the respective molecular constituents.     

Thiol‐ene photopolymerization for efficient curing of vinyl esters

Monomers for radical photopolymerization based on vinyl esters (VEs) have recently been identified as suitable alternatives to (meth)acrylates on account of their low irritancy and cytotoxicity. The drawback of most VEs with abstractable hydrogens is their relatively low reactivity compared with (meth)acrylates. Within this article, we proved by photo‐differential scanning calorimetry measurements and real‐time Fourier transform infrared spectroscopy that the thiol‐ene concept is able to improve the photoreactivity of these VEs to a large extent to a level between those of acrylates and methacrylates. Other VEs have now a reactivity of at least the level of similar acrylates. Mechanical properties as determined by Dynamic Mechanical Analysis and Charpy impact tests showed significant toughening of these materials. Furthermore, we were able to confirm low toxicity of all components by osteoblast cell culture experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of optically active vicinal fluorohydrins by lipase-catalyzed deracemization

Three microbial lipases have been used to deracemize trans-2-fluorocycloalkanols 2 both by hydrolysis of the corresponding acetates 3 or chloroacetates 4 and by esterification of the fluorohydrins 2 using vinyl acetate and vinyl chloroacetate, respectively. Pseudomonas cepacia lipase was the most selective for the six- and the seven-membered-ring compounds, while the lipase from Candida rugosa was most useful for the eight-membered-ring compounds. Both lipases transform the (R)-enantiomers preferentially. In contrast the lipase from Candida antarctica hydrolyzed the esters of trans-2-fluorocyclohexanol 2a and esterified the fluorohydrin itself with very low enantiopreference for the (R)-isomers. The seven- and the eight-membered ring esters and the corresponding fluorohydrins were also transformed with low, but reverse, enantioselectivity.