同步辐射X射线成像光束线劳厄双晶单色器设计

上海光源X射线成像光束线采用多极扭摆器(wiggler)作为辐射光源, 提出一种劳厄双弯晶单色器的设计方案. 计算结果显示, 可获得固定出口的平行单色光束, 能量调谐范围覆盖19—120keV, 在33keV时, 输出光子通量及通量密度分别为1.9×10¹³phs/s和3.8×10¹⁰phs/s/mm². 分析了劳厄晶体的聚焦及单色化性能, 计算了输出光子通量及单色器的热负载情况. 与传统的双平晶方案相比, 本设计在获得高通量和解决热负载等方面有明显的优越性, 并能有效控制热形变.     

Quantum Tricritical Point in the Spin-Boson Model with an Ohmic Bath

The dynamics of the spin-boson model with an Ohmic bath at finite temperature is studied by a variational calculation. Numerical solution of the self-consistent equation derived from the variational method shows that the transition from incoherent to coherent phases is discontinuous. It indicates that （T = 0, s = 1） is a tricritical point, i.e. the transition changes from continuous to discontinuous by tuning from T = 0 to T≠ 0. The discontinuous transition at finite temperature is analysed by Landau theory and the relation to the experimental observation on the coherent state is also discussed.     

光纤量子密码网络

 数字通信和数字信号处理领域的快速发展直接推动了20世纪后半叶兴起的信息革命。今天的数字信息系统仍然只在经典物理的范畴。每一个比特的信息都能完全的被经典器件描述，比如说一个晶体管或者微处理器的输入电压高低来代表0或者1。然而，信息也能通过量子力学的方式来处理和传输，这就产生了全新的量子信息科学。量子信息科学的一个典型应用就是量子密码术，在过去的十几年中发展十分迅速，美国和欧洲甚至都已经有比较成熟的商业产品。那么，什么是量子密码术，它的基本工作原理是什么，量子密码网络又是解决什么问题的。希望通过本文的叙述，读者能有大致的了解。     

Quantum secure direct communication and deterministic secure quantum communication

In this review article, we review the recent development of quantum secure direct communication (QSDC) and deterministic secure quantum communication (DSQC) which both are used to transmit secret message, including the criteria for QSDC, some interesting QSDC protocols, the DSQC protocols and QSDC network, etc. The difference between these two branches of quantum communication is that DSQC requires the two parties exchange at least one bit of classical information for reading out the message in each qubit, and QSDC does not. They are attractive because they are deterministic, in particular, the QSDC protocol is fully quantum mechanical. With sophisticated quantum technology in the future, the QSDC may become more and more popular. For ensuring the safety of QSDC with single photons and quantum information sharing of single qubit in a noisy channel, a quantum privacy amplification protocol has been proposed. It involves very simple CHC operations and reduces the information leakage to a negligible small level. Moreover, with the one-party quantum error correction, a relation has been established between classical linear codes and quantum one-party codes, hence it is convenient to transfer many good classical error correction codes to the quantum world. The one-party quantum error correction codes are especially designed for quantum dense coding and related QSDC protocols based on dense coding.      

One‐Step Synthesis of SnO2 and TiO2 Hollow Nanostructures with Various Shapes and Their Enhanced Lithium Storage Properties

A versatile one‐step method for the general synthesis of metal oxide hollow nanostructures is demonstrated. This method involves the controlled deposition of metal oxides on shaped α‐Fe₂O₃ crystals which are simultaneously dissolved. A variety of uniform SnO₂ hollow nanostructures, such as nanococoons, nanoboxes, hollow nanorings, and nanospheres, can be readily generated. The method is also applicable to the synthesis of shaped TiO₂ hollow nanostructures. As a demonstration of the potential applications of these hollow nanostructures, the lithium storage capability of SnO₂ hollow structures is investigated. The results show that such derived SnO₂ hollow structures exhibit stable capacity retention of 600–700 mAh g^?1 for 50 cycles at a 0.2 C rate and good rate capability at 0.5–1 C, perhaps benefiting from the unique structural characteristics.     

水中阴离子表面活性剂的吸附分光光度法测定

研究萘基二苯甲烷与阴离子表面活性剂的缔合反应及缔合物在聚合物颗粒表面的吸附及洗脱 ,提出了碱性艳蓝BO分光光度法测定河水中的阴离子表面活性剂 ;碱性艳蓝BO与十二烷基苯磺酸钠、十二烷基硫酸钠、十二烷基磺酸钠的缔合物的表观摩尔吸光系数分别为3.76×104、3.63×104、2.15×104L·mol -1·cm -1 ,方法的线性范围为0.0～2.0mg/L,相对标准偏差3.8% (n=8);应用该法测定河水中阴离子表面活性剂含量 ,结果令人满意     

大气丙酮碳同位素组成测定方法的研究

利用气相色谱/燃烧/同位素比值质谱(GC/C/IRMS)分析技术,研究了具有不同碳同位素组成的丙酮与衍生剂2,4-二硝基苯肼(DNPH)的液相反应及其相应的气相反应实验过程中的碳同位素效应,探讨了以该方法测定大气丙酮碳同位素组成的可行性。研究结果表明,在衍生化过程中不会产生碳同位素分馏。本实验通过测定衍生剂DNPH与相应的衍生物的碳同位素值,大气中丙酮碳同位素组成通过质量平衡方程计算而求得。采用该方法对大气丙酮碳同位素组成的初步测定结果表明,具有相同排放源的大气丙酮碳同位素比值基本不变。本方法实验重现性好,测定精度高,可以用于分析大气丙酮的排放源研究。     

Simultaneous residue monitoring of four tetracycline antibiotics in fish muscle by in-tube solid-phase microextraction coupled with high-performance liquid chromatography

An on-line simple and rapid method for the simultaneous determination of tetracycline (TC), oxytetracycline (OTC), chlortetracycline (CTC) and doxycycline (DC) residues in fish muscle was developed by coupling in-tube solid-phase microextraction (SPME) to high-performance liquid chromatography (HPLC) with a photodiode array detector. Biocompatible poly (methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary was selected as the extraction medium, and no precipitating protein and removing fat steps were required prior to extraction. In order to optimize the extraction of these compounds, several in-tube SPME parameters were investigated. Simply performed by extracting with 0.01 M EDTA-MacIlvaine buffer solution (pH 4.0) and centrifugation, the sample then could be directly injected into the device for extraction. The limits of detection of tetracycline, oxytetracycline, chlortetracycline and doxycycline were calculated to be 22, 16, 30 and 21 ng/g, respectively. The calibration curves showed linearity in the range of 100-10,000 ng/g with a linear coefficient R² value above 0.9980. Excellent method reproducibility was found by intra- and inter-day precisions, yielding the R.S.D.s less than 4.22% and 5.71%, respectively.     

Au/SBA-15 的制备及其催化 CO 氧化反应性能

 以 SBA-15 为载体, 采用沉积沉淀法制备了纳米 Au 催化剂, 研究了不同预处理条件对 Au 在载体表面状态的影响, 考察了催化剂样品催化 CO 氧化性能. 以高分辨率透射电子显微镜、N2 吸附、X 射线衍射、紫外-可见漫反射吸收谱、X 射线光电子能谱和电感耦合等离子体发射光谱等手段对催化剂的结构和表面性质进行了表征. 结果表明, 经还原焙烧处理后的 Au/SBA-15 催化剂热稳定性较好, Au 在 SBA-15 孔道表面呈高分散状态, 样品在 CO 氧化反应中表现出优异的低温催化活性和高温稳定性, 同时具有优异的抗烧结性能和良好的循环稳定性.     

Rationally Designed Three‐Layered Cu2S@Carbon@MoS2 Hierarchical Nanoboxes for Efficient Sodium Storage

Hybrid materials, integrating the merits of individual components, are ideal structures for efficient sodium storage. However, the construction of hybrid structures with decent physical/electrochemical properties is still challenging. Now, the elaborate design and synthesis of hierarchical nanoboxes composed of three‐layered Cu₂S@carbon@MoS₂ as anode materials for sodium‐ion batteries is reported. Through a facile multistep template‐engaged strategy, ultrathin MoS₂ nanosheets are grown on nitrogen‐doped carbon‐coated Cu₂S nanoboxes to realize the Cu₂S@carbon@MoS₂ configuration. The design shortens the diffusion path of electrons/Na⁺ ions, accommodates the volume change of electrodes during cycling, enhances the electric conductivity of the hybrids, and offers abundant active sites for sodium uptake. By virtue of these advantages, these three‐layered Cu₂S@carbon@MoS₂ hierarchical nanoboxes show excellent electrochemical properties in terms of decent rate capability and stable cycle life.