Multisites Cr3+ in GGG and GSGG garnets

The emission and excitation spectra of Cr³⁺ -doped Gd₃Ga₅O₁₂ (GGG) and Gd₃Sc₂Ga₃O₁₂ (GSGG) are explained in the light of multisite effects. The situation is particularly complicated in the case of GSGG, where the different sites have²E energy levels near each other which overlap with the⁴A₂ ⁴T₂ absorption bands. The spectra obtained under selective excitations are interpreted on the multisite assumption.     

New results on quadratic stabilization of switched linear systems with polytopic uncertainties

^** Corresponding author. Email: longwang{at}pku.edu.cn^*** Email: jizj{at}mech.pku.edu.cn In this paper, the quadratic stabilization of switched linearsystems with polytopic uncertainties is considered. Comparedwith the existing result, a more general switching control methodis proposed to guarantee the quadratic stabilization. This switchingcontrol method is based on the partition of the vertex matrixset of each subsystem. By this method, the matrix inequalitiesneeded to be solved are always less than those needed to besolved before except one extreme case; for this case, it isequal. The switched control synthesis problem is also studiedfor both switched state feedback and output feedback. Severalbilinear matrix inequality based conditions are derived forboth cases.     

地方综合性大学物理实验精品课程建设的探讨

精品课程建设是高等学校提高教学质量的重要措施之一。地方综合性大学进行精品课程建设应该突出地方大学的特点,本文从师资队伍、教材建设、教学方法和手段、教学条件和网络建设方面进行了初步探讨。     

Grüneisen parameter for HCP iron at extreme compression

The Thomas–Fermi approximation gives the Grüneisen parameter γ=γ_∞=1/2 for all materials at extreme compression (P→∞ or V→0). After re-analyzing the existing experimental data of volume dependence of Grüneisen parameter γ of hexagonal close-packed (HCP) iron, we find that γ=1/2+a(V/V ₀)^1/3+b(V/V ₀) ⁿ , where a, b and n are constants. Based on this new form of γ, the second Grüneisen parameter q, the Debye temperature θ_D and the shear sound velocity v _s of HCP iron are discussed in the present work. It is found that the zero pressure second Grüneisen parameter q ₀=0.654, which is consistent with the previously determined value of HCP iron for Earth's core physics from Dubrovinsky et al. The calculations for the Debye temperature and the shear sound velocity are also found to be in good agreement with the experimental data.     

具有位相型修理的离散时间可修排队系统

本文研究了具有一般独立输入，位相型修理的离散时间可修排队系统，假定服务台对顾客的服务时间和服务台寿命服从几何分布，运用矩阵解析方法我们给出系统嵌入在到达时刻的稳态队长分布和等待时间分布，并证明这些分布均为离散位相型分布．我们也得到在广义服务时间内服务台发生故障次数的分布，证明它服从一个修正的几何分布．我们对离散时间可修排队与连续时间可修排队进行了比较，说明这两种排队系统在一些性能指标方面的区别之处．最后我们通过一些数值例子说明在这类系统中顾客的到达过程、服务时间和服务台的故障率之间的关系．     

蒙特卡罗计算机模拟应用一例

通过圆周率的计算，说明蒙特卡罗计算机模拟方法的应用过程     

Transport through artificial single-molecule magnets: Spin-pair state sequential tunneling and Kondo effects

The transport properties of an artificial single-molecule magnet based on a CdTe quantum dot doped with a single Mn+2 ion(S=5/2) are investigated by the non-equilibrium Green function method.We consider a minimal model where the Mn-hole exchange coupling is strongly anisotropic so that spin-flip is suppressed and the impurity spin S and a hole spin s entering the quantum dot are coupled into spin pair states with(2S+1) sublevels.In the sequential tunneling regime,the differential conductance exhibits(2S+1) possible peaks,corresponding to resonance tunneling via(2S+1) sublevels.At low temperature,Kondo physics dominates transport and(2S+1) Kondo peaks occur in the local density of states and conductance.These peaks originate from the spin-singlet state formed by the holes in the leads and on the dot via higher-order processes and are related to the parallel and antiparallel spin pair states.     

Metamaterial absorber and extending absorbance bandwidth based on multi-cross resonators

In this paper, we report the design, simulation, and measurements of a broadband metamaterial absorber (MA) based on a periodic array of multi-layer cross-structure resonators. A perfect narrowband MA consists of cross-structure resonator, dielectric substrate, and continuous metal films, and the absorption frequency can be tunable by changing the geometrical parameters based on L-C resonance circuit theory. Furthermore, the absorption band of our design is effectively extended by simply stacking several such structural layers with different geometrical dimensions. Finally, the 4-layer cross-structure MA is only 2 mm, which can achieve a full width at half maximum (FWHM) bandwidth of 2 GHz by numerical simulations, and 90 % bandwidth of 1.9 GHz by experiments.     

激光喷丸改善TC6钛合金组织和力学性能

为了使激光冲击强化技术能较好地应用于TC6钛合金的发动机叶片,对TC6钛合金进行试验研究。通过X射线衍射仪、透射电子显微镜等测试技术分析了不同参数下TC6钛合金的微观组织变化,用显微硬度计和残余应力测试仪分别表征表层硬度和残余应力变化,并测试材料冲击后的振动高周疲劳性能。试验结果表明:激光冲击材料后表面组织得到明显细化,随着冲击次数的增加,先后出现了高密度位错、位错胞、亚晶和纳米晶。性能方面,表面硬度在冲击一次即可提高19%,硬度影响深度达到700 m;与此同时表面残余应力最高达到-608.5 MPa,在500 m深度上仍具有-100 MPa左右的应力存在。经三次冲击后,标准疲劳试片的疲劳极限提高近20%。     

大功率半导体激光器阵列热串扰行为

以硬焊料传导制冷,30%填充因子半导体激光器阵列为例,建立了三维有限元模型,对阵列内部各发光单元之间的热串扰行为进行了分析研究。结果表明,当其连续波工作时间大于1.2 ms后,阵列内发光单元之间出现热串扰现象;当次热沉由CuW合金改为铜金刚石复合材料时,阵列内发光单元自热阻和相邻发光单元的串扰热阻降低,有效地降低了各发光单元之间的热串扰行为。保持阵列宽度、发光单元数目及发光单元周期不变,发现随阵列填充因子的增加,器件热阻以指数衰减趋势逐渐降低,而发光单元间的热串扰特性对此变化并不敏感;保持阵列单个发光单元输出功率,发光单元尺寸及阵列宽度不变,增加发光单元个数后,阵列内各发光单元之间热串扰加剧,填充因子越高阵列升温速率越快;但在最初约70 s内,包含不同数目发光单元的阵列最高温度差异仅约0.5 ℃,有利于多发光单元高填充因子器件高功率输出。