Design and Performances of a Carbon Monoxide Sensor Using Mid-Infrared Absorption Spectroscopy Technique at 4.6 µm

Based on infrared absorption spectroscopy technique, a carbon monoxide sensor was developed using the fundamental absorption band of carbon monoxide molecule at the wavelength around 4.6 µm. The developed sensor consists of pulse-modulated wideband incandescence, open ellipsoid light-collector gas-cell, dual-channel detector, and control and signal-processing module. With the prepared standard carbon monoxide gas sample, sensing characteristics on carbon monoxide were investigated using the sensor. Experimental results reveal that the limit of detection is about 10 ppm, the relative error at the limit of detection point is less than 14%, and that is less than 7.8% within the low concentration range of 20～180 ppm. The maximum absolute errors of 50 min long-term measurement on the 0 and 14 ppm CO gas samples are about 3 and 3.17 ppm, respectively, and the standard deviations are as small as 0.18 and 1.25 ppm, respectively. Compared with the reported carbon monoxide detection systems utilizing quantum cascaded lasers and distributed feedback lasers, the proposed sensor shows potential applications in carbon monoxide detection under the circumstances of coal-mine and environmental protection, by virtue of high performance, low cost, simple optical structure, and so on.     

A Mixed Mann Iteration Process for Fixed Points of Mixed Increasing Operators in Ordered Banach Spaces

In this paper, we develop a new mixed Mann iteration process to approximate the fixed points of mixed increasing operators in ordered Banach spaces and discuss the convergence analysis of the iterative sequences generated by the iteration process. As an application, we develop a new iterative method for solving a class of nonlinear integral equations.     

Solution-processable graphenes by covalent functionalization of graphene oxide with polymeric monoamines

We develop here a simple wet chemistry to prepare covalent functionalized graphenes(FGs) through epoxide aminolysis especially under alkaline aqueous condition. Remarkably, a series of typical monoamines, such as industrial Huntsman Jeffamine~ M-2070 and M-2005 polymer with hydrophilic or hydrophobic polyetheramine chains, positively-charged 2-amino-N,N,Ntrimethylpropanaminium,negatively-charged sulfanilic acid, even oligopeptide sequence, can be effectively grafted on the platelets of graphene oxide precursor with covalent functionalization and partially reduced features. This strategy provides the researchers a facile and convenient approach to design and synthesize solution processable, biocompatible and functionalized graphenes for the potent applications in electronic inks, drug carriers and biomedicines. Expansion of the current study is actively ongoing in our laboratory.     

Evolution from Diffuse Ferroelectric to Relaxor Ferroelectric in Pb1-xBax（Fe1/2Nb1/2）O3 Solid Solutions

Dielectric and ferroelectric characteristics for Pb1-xBax（Fe1/2Nh/2）O3 （x = 0,0.05,0.1,0.15, and 0.2） ceramics are determined together with their structures. X-ray diffraction （XRD） analysis confirms the solid solutions with the cubic structure. The dielectric nature changes from diffuse ferroelectric to relaxor ferroelectric with increasing x, while the phase transition temperature Tc （or Tm） decreases monotonously. The diffuse ferroelectric phase transition is observed in the solid solutions with 0≤x ≤0.05. For Pbl-xBax（Fe1/2Nb1/2）O3 with 0.1≤ x≤0.2, relaxor ferroelectric behavior is determined, and the Vogel-Fulcher equation is used to describe the relaxor behavior. The 1/ε versus T plots reveal the diffusion dielectric characteristics in both diffuse and relaxor ferroelectrics.     

Protein Staining Agents from Cationic and Neutral Luminescent Iridium(III) Complexes

Seven luminescent iridium(III) complexes were prepared to investigate the relationships between chemical structures and properties of protein staining. For the first time, the effect of the main ligand, the π conjugation effect of the ancillary ligand, and the charge effect of organometallic complexes on protein staining has been revealed. Most importantly, this study gives the first experimental evidence of the potential applications of charge‐neutral organometallic complexes in protein staining, which could open an avenue of exploiting novel protein staining agents in the future.     

Enhanced Solution and Solid-State Emission and Tunable White-Light Emission Harvested by Supramolecular Approaches

Organic luminescent materials with high quantum yields and/or white-light-emitting properties in particular play a crucial role in labeling and optoelectronic devices. In this work we have synthesized a new 2,3,6,7-tetramethoxy-9,10-di-p-tolylanthracene-bridged pillar[5]arene dimer with persistent mazarine blue fluorescent emission and much higher quantum yields in both solution and the solid state in comparison with its corresponding emissive linker without pillarene units, which exhibits typical aggregation-caused quenching. According to the fluorescence data and single-crystal analyses, their contrasting fluorescent performances can be rationally ascribed to their different stacking structures and intermolecular interactions. Three fluorescent guests containing different chromophores and/or terminal binding sites have also been synthesized to interact with the pillar[5]arene dimer to construct supramolecular ensembles with highly controllable luminescence, taking advantage of the stimuli-responsive properties of the supramolecular host–guest interactions. Intriguingly, multicolor fluorescence, including white-light emission (0.31, 0.35), which is in high demand, has been achieved by tuning the molar ratio of the host and guest and/or by changing the solvent system. This strategy holds great potential for the design and development of fluorescent materials with high quantum yields, controllable emission wavelength, and good stimuli-responsiveness.