Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Enhanced and selective adsorption of mercury ions on chitosan beads grafted with polyacrylamide via surface-initiated atom transfer radical polymerization

Enhanced and selective removal of mercury ions was achieved with chitosan beads grafted with polyacrylamide (chitosan-g-polyacrylamide) via surface-initiated atom transfer radical polymerization (ATRP). The chitosan-g-polyacrylamide beads were found to have significantly greater adsorption capacities and faster adsorption kinetics for mercury ions than the chitosan beads. At pH 4 and with initial mercury concentrations of 10-200 mg/L, the chitosan-g-polyacrylamide beads can achieve a maximum adsorption capacity of up to 322.6 mg/g (in comparison with 181.8 mg/g for the chitosan beads) and displayed a short adsorption equilibrium time of less than 60 min (compared to more than 15 h for the chitosan beads). Coadsorption experiments with both mercury and lead ions showed that the chitosan-g-polyacrylamide beads had excellent selectivity in the adsorption of mercury ions over lead ions at pH < 6, in contrast to the chitosan beads, which did not show clear selectivity for either of the two metal species. Mechanism study suggested that the enhanced mercury adsorption was due to the many amide groups grafted onto the surfaces of the beads, and the selectivity in mercury adsorption can be attributed to the ability of mercury ions to form covalent bonds with the amide. It was found that adsorbed mercury ions on the chitosan-g-polyacrylamide beads can be effectively desorbed in a perchloric acid solution, and the regenerated beads can be reused almost without any loss of adsorption capacity.     

Itosides A – I,New Phenolic Glycosides from Itoa orientalis

Eight new benzoylated gentisyl alcohol (=2‐(hydroxymethyl)benzene‐1,4‐diol) glucosides, itosides A–H ( 1 – 8 ), together with the new pyrocatechol (=benzene‐1,2‐diol) glycoside itoside I ( 9 ) were isolated from the bark and twigs of Itoa orientalis (Flacourtiaceae). In itosides B–D ( 2 – 4 ), the gentisyl alcohol moiety was esterified by 1‐hydroxy‐6‐oxocyclohex‐2‐ene‐1‐carboxylic acid, while itosides E–H ( 5 – 8 ) contained instead an additional 2‐hydroxybenzoic acid moiety. The compounds were accompanied by the known derivatives 4‐hydroxytremulacin ( 10 ), poliothyrsoside ( 11 ), poliothyrsin ( 12 ), homaloside D ( 13 ), tremulacin, and pyrocatechol β‐D ‐glucopyranoside. The structures of the new compounds were elucidated by spectral and chemical methods.     

RE(CCl_3COO)_3(Phen)_2·nH_2O混配配合物的合成、性质及晶体结构

利用水和乙醇混合溶剂合成了稀土三氯醋酸盐与2份1,10-邻菲绕啉(phen)配合物RE(CCl_3COO)_3(phen)_2·nH_2O(RE=Nd,Sm,n=0;RE=Eu,n=2)的单晶.结构测定表明,Nd(CCl_3COO)_3(phen)_2为三斜晶系,每个三氯醋酸盐均以双齿配位,2个phen亦为双齿配位,故配位单元中钕为10配位;Eu(CCl_3COO)_3(phen)_2·2H_2O为单斜晶系,1个三氯醋酸根在外界,2个三氯醋酸根为单齿配位,2个phen为双齿配位,另有2分配位水,故配位单元中Eu为8配位.     

A novel Fe（OH）3/TiO2 nanoparticles and its high photocatalytic activity

A very simple and controllable approach was proposed to synthesize novel Fe(OH)_3/TiO_2 nanoparticles.Compared with neat TiO2,the Fe(OH)_3/TiO_2 increased the rate of the photocatalytic degradation of methyl orange at pH 6.0 by more than five times, showing photocatalytic activity as excellent as P25.This enhancing effect is mainly attributed to the ferric hydroxide deposits as the electron scavenger and the enriched surface hydroxyl groups.     

二茂铁亚胺环钯化合物－－一种新型芳基氯化汞偶联催化剂

发现在催化量二茂铁亚胺环钯化合物催化下，芳基氯化汞可在湿和条件下偶联 ，以中等或高的收率生成联芳烃。对于铑盐不能催化偶联的邻位取代苯基氯化汞和 α－基氯化汞，在此体系中亦可发生偶联。以HMPA为溶剂，在x = 0.025（摩尔分 数）化合物1或2催化下与2.0当量氯化锂存在时，得到最好的催化效果。     

Fe3+/V5+/TiO2复合纳米微粒光催化性能的研究

采用溶胶凝胶法制备了Fe^3 /V^5 /TiO2复合纳米微粒作为光催化剂。光降解反应结果表明，其掺杂催化剂Fe^3 /V^5 /TiO2的光催化活性明显提高。光电化学研究显示，铁离子可以成为电荷陷阱，促进空穴的界面传递反应。适量钒离子掺杂使TiO2电极的光电流升高，导带中电子浓度的增大，加快了界面的电子传递反应。共掺杂催化剂中，Fe^3 、V^5 分别提供了空穴与电子的陷阱，同时加快了电子与空穴的界面传递反应，从 更有效地提高光催化活性。双组份共掺杂为提高TiO2光催化活性提供新的途径。     

稀土钬及铒钇丙氨酸配合物的量热与热分析研究

合成了两种固态稀土丙氨酸配合物[Ho2(Ala)4(H2O)8]Cl6和[ErY(Ala)4(H2O)8](ClO4)6 (Ala为丙氨酸),用量热和热分析方法研究了这两种配合物的热力学性质.用全自动高精密绝热量热计测定了在78～377 K温区内的低温热容.对于[Ho2(Ala)4(H2O)8]Cl6,在214～255 K温区内发现一固-固相变,其相变温度为235.09 K.对于[ErY(Ala)4(H2O)8](ClO4)6,在99～121 K温区内也发现一固-固相变,其相变温度为115.78 K. [Ho2(Ala)4(H2O)8]Cl6固-固相变焓为3.02 kJ• mol－1,相变熵为12.83 J•K－1•mol－1； [ErY(Ala)4(H2O)8](ClO4)6 固-固相变焓为1.96 kJ•mol－1,相变熵为16.90 J•K－1•mol－1.同时,用TG技术在40～800 ℃温区研究了两配合物的热稳定性.由TG/DTG曲线分析可知, [Ho2(Ala)4(H2O)8]Cl6从80 ℃到479 ℃热分解分两步完成, [ErY(Ala)4(H2O)8](ClO4)6从120 ℃到430 ℃热分解分三步完成.     

Patterned polyelectrolyte multilayer: surface modification for enhancing selective adsorption

This paper describes the use of surface chemical modification to enhance the difference of the surface charge on a patterned polyelectrolyte multilayer, which can be used for selectively adsorbing functional materials. We fabricated a patterned multilayer by combining the layer-by-layer self-assembly technique and photolithography and taking advantage of the different solubility of polyelectrolyte multilayers of diazo resins (DAR)/poly(acrylic acid) before and after UV irradiation. This patterned surface can be used as a matrix for selective adsorption of small molecular dyes, such as Methylene Blue. However the difference in surface charge on the patterned surface was not enough when we used it to selectively adsorb polystyrene (PS) nanoparticles using electrostatic force as the driving force. Therefore, we modified the patterned surface by interfacial chemistry. After modification, the patterned polyelectrolyte multilayer can be used as a good matrix for selective adsorption of PS nanoparticles with both positive and negative charges.     

Synthesis and stereochemical assignment of 7-arylidene and 7-heteroarylidene morphinan-6-ones

A number of (E)-7-arylidenenaltrexones were synthesized by azeotropic distillation of water from a benzene solution of naltrexone and an aromatic aldehyde (benzaldehyde, 4-chloro- and 4-fluorobenzaldehyde, 3-and 4-pyridinecarboxaldehyde and 1-methyl-2-imidazolecarboxaldehyde) using piperidine as a catalyst. In addition, (E)-7-benzylidenenaloxone was prepared by the previously published Claisen-Schmidt condensation using sodium hydroxide in methanol. The stereochemistry of these arylidene derivatives 3–9 was determined to be (E) by means of nuclear Overhauser enhancement experiments. The ¹³C nmr spectra of (E)- 3–9 are recorded in deuteriochloroform and those of the hydrochlorides in deuteriodimethyl sulfoxide.