基于摩擦磨损的KDP晶体固结磨料抛光垫优化

本文通过固结磨料球与KDP晶体对磨的单因素试验探究固结磨料球中反应物种类、磨粒浓度、反应物浓度、基体硬度对摩擦系数、磨痕截面积和磨痕处粗糙度的影响,试验结果表明:KHCO₃固结磨料球对磨后磨痕对称性好,磨痕处的粗糙度值低;磨痕截面积随磨粒和反应物浓度的增加而增大,随基体硬度的增大而降低;磨痕处粗糙度随磨粒和反应物浓度的增加先降低后上升,随基体硬度的增大先上升后降低;摩擦系数受磨粒和反应物浓度影响不明显,随基体硬度的增大而降低。选择KHCO₃作为反应物,Ⅰ基体,磨粒浓度为基体质量的100%,反应物浓度为15%制备固结磨料球与KDP晶体对磨后的磨痕轮廓对称度好且磨痕处粗糙度值低,以该组分制备固结磨料垫干式抛光KDP晶体,可实现晶体表面粗糙度Sa值为18.50 nm,材料去除率为130 nm/min的高效精密加工。     

吲哚化合物绿色高效的硫氰酸化反应

本文报道了在温和绿色的条件下,以过氧化氢(H₂O₂)作为氧化剂,进行吲哚化合物区域选择性硫氰酸化反应。结果表明：该反应体系中,无论是氮取代吲哚还是游离氨基吲哚均可获得较高的产率。产物2a～2o的结构经¹H NMR和¹³C NMR表征。该方法的主要特点是反应条件温和,反应时间短,产率高。     

磁化分层等离子体中电磁波传播特性研究

采用混合矩阵法,分析了磁化分层等离子鞘套对斜入射电磁波传播特性的影响,分别计算了不同入射角以及外加磁场下电磁波透射系数和极化特性的变化。以GPS导航信号右旋圆极化波(RCP)为例,研究了磁场、电子密度对电磁波右旋圆极化特性的影响。结果表明,外加磁场能够使右旋圆极化波在等离子体中的阻带向高频方向移动,此外,外加磁场能在一定程度上改善斜入射是圆极化波的极化特性,有利于GPS信号接收。     

碳纳米纤维吸附储氢性能分析

文中综合碳纳米纤维微观结构的表征结果以及氢吸脱附等温线的实验测量结果,对碳纳米纤维的吸附储氢性能进行了综合分析,分析发现:比表面积和中孔容积均与氢吸附量成线性关系;微孔容积对材料吸附性能影响较大,微孔容积与氢吸附量成抛物线关系;氢在常温左右以及77K下的吸附等温线呈现超临界气体的吸附特征,氢在273K和353K下的吸脱附等温线也基本重合,呈现的是物理吸附的特征。实验结果还说明:常温左右,甚至是77K下,碳纳米纤维均不适合于氢的吸附储存。     

Study on the Beam Quality of Uncoupled Laser Diode Arrays

The beam quality of uncoupled laser diode array is studied theoretically and experimentally. By calculating the second order moments of the beam emitted from the laser diode array, the dependence of the M2-factor of the laser diode array on the M2-factor of the single emitter, the ratio of the emitting region to the non-emitting space, and the number of emitters, has been deduced. From the measurement of the beam propagation the M2-factor of a laser diode bar is experimentally determined. The measured M2-factor of the laser diode bar agrees with the theoretical prediction.     

A stage-structured predator-prey system with time delay

A stage-structured predator-prey system with time delay is considered. By analyzing the corresponding characteristic equation, the local stability of a positive equilibrium is investigated. The existence of Hopf bifurcations is established. Formulae are derived to determine the direction of bifurcations and the stability of bifurcating periodic solutions by using the normal form theory and center manifold theorem. Numerical simulations are carried out to illustrate the theoretical results. Based on the global Hopf bifurcation theorem for general functional differential equations, the global existence of periodic solutions is established.     

Zirconia fiber membranes based on PVDF as high-safety separators for lithium-ion batteries using a papermaking method

Journal of Solid State Electrochemistry - Lithium-ion batteries have been receiving more and more attention because of the energy crisis. As an important subassembly of lithium-ion batteries, the...     

The effect of methyl group on the mechanical properties of hydrophobic association hydrogel

Hydrophobic association hydrogels were fabricated via micellar copolymerization of acrylamide and hydrophobic monomers lauryl (meth)acrylate (LA or LMA) in an aqueous solution of sodium dodecyl sulfate. The effect of methyl groups of hydrophobic monomers on the crosslinking network structure and mechanical behavior of the gels was investigated on the basis of rubber elastic theory. It was found that the LMA-gel exhibited higher effective crosslink density and elastic modulus. The methyl groups of hydrophobic monomers limited the flexibility of the methacrylate backbone in the association domain, which resulted in the increment of chains constraints. With the increase of stretch rate, the dissipated energy of LMA-gel increased more highly than that of LA-gel. In addition, the methyl group hindered the movement of polymer chains, leading to the lower recovery efficiency of dissipated energy for LMA-gel. In contract, the LA-gel exhibited a rapid response to external force, and possessed better elasticity and self-recovery property. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1505–1512     

Nonlinear elastic waves in a monatomic chain with nonlinear interaction

1　ＩＮＴＲＯＤＵＣＴＩＯＮＢｅｃａｕｓｅｓｏｍｅｉｍｐｏｒｔａｎｔ ｐｒｏｐｅｒｔｉｅｓｏｆｃｒｙｓｔａｌ(ｓｕｃｈａｓｓｐｅｃｉｆｉｃｈｅａｔａｔｈｉｇｈｔｅｍｐｅｒａｔｕｒｅ ,ｍｅｌｔｉｎｇ ,ｔｈｅｒｍａｌｅｘｐａｎｓｉｏｎ ,ｔｅｍｐｅｒａｔｕｒｅｄｅ     

Electron beam evaporated LaF3 thin films prepared by different temperatures and deposition rates

LaF₃ thin films were prepared by electron beam evaporation with different temperatures and deposition rates. Microstructure properties including crystalline structure and surface roughness were investigated by X-ray diffraction (XRD) and optical profilograph. X-ray photoelectron spectroscopy (XPS) was employed to study the chemical composition of the films. Optical properties (transmittance and refractive index) and laser induce damage threshold (LIDT) at 355 nm of the films were also characterized. The effects of deposition rate and substrate temperature on microstructure, optical properties and LIDT of LaF₃ thin films were discussed, respectively.