左手介质椭圆光波导基模传播特性

在椭圆柱坐标系中,采用分离变量方法,得出了左手介质椭圆光波导本征方程的近似解,通过数值计算,分析了椭圆波导偏心率、左手介质的电容率、磁导率对椭圆光波导基模传播特性的影响,并将左介质光波导与右手介质光波导基模特性进行对比,得出左手介质光波导的基模特性与右手介质光波导基模特性差别不大的结论.     

叶片扩压器进口安装角对离心压缩机性能影响的数值与实验研究

对不同扩压器进口安装角下离心压缩机的性能进行了实验研究,并详细计算分析了相应的流场分布。分析表明, 不同的进口安装角对压缩机的流动有较大的影响,压缩机的性能曲线也有不同程度的左右偏移;进口处较大的正冲角和负冲角均会在扩压器叶片表面出现大尺度的分离涡团;在给定的流量工况下,应存在一个最佳的进口安装角,使得扩压器效率最高;设计工况下,最高效率所对应的冲角并非为零。     

过量Zn对β-Zn4Sb3热电性能影响的研究

采用真空熔融缓冷方法制备了单相β-Zn4Sb3以及含有过量Zn的β-Zn4Sb3块体热电材料.在300—700K的温度范围内测试了材料的电导率、Seebeck系数和热导率,研究了β-Zn4Sb3化合物中过量Zn的分布状态及其对材料热电性能的影响规律.结果表明：过量的Zn作为第二相较均匀的分布在β-Zn4Sb3的晶界上,随着Zn含量增加,材料电导率和热导率上升,Seebeck系数下降,Zn第二相的引入能有效提高材料的功率因子,Zn过量2at%的材料在700K时其ZT值达到1.10.     

共焦腔增强的空气拉曼散射

拉曼光谱是一种无损、快速的物质成分分析和检测方法.由于拉曼信号强度微弱,使得拉曼光谱的检测应用受到极大的限制.针对增强拉曼散射信号强度、提高检测灵敏度这一问题,设计了一种用于自发拉曼散射信号增强的共焦腔样品池,开展了基于该共焦腔的空气拉曼散射信号增强研究.共焦腔的腔镜反射率为92%,这一设计在保证共焦腔通带宽度与激光器线宽匹配的同时能有效地降低共振调节难度.实验中采用0°探测构型收集拉曼信号,并由成像式拉曼光谱仪获取光谱信号.实验发现,在共振状态下,共焦腔的耦合效率达到87.5%,单向激光功率实现约11倍放大;与无共振腔相比,共焦腔对拉曼信号实现17倍放大,信噪比提高2倍.此外,空气中CO_2的3σ检测限达到200 ppm量级.结果表明,该系统对自发拉曼散射信号增强效果显著,并且有较高的检测灵敏度.     

Strength and equation of state of molybdenum triboride under 80 GPa pressure,using radial X-ray diffraction

The strength and equation of state of molybdenum triboride have been determined under nonhydrostatic compression up to 80?GPa, using an angle-dispersive radial X-ray diffraction technique in a diamond anvil cell (DAC). The RXD data yield a bulk modulus and its pressure derivative as K_0?=?342(6)?GPa with K₀′?=?2.11(17) at ψ?=?54.7°. Analysis of diffraction data using the strain theory indicates that the ratio of differential stress to shear modulus (t/G) ranges from 0.002 to 0.050 at pressures of 4–80?GPa. Together with theoretical results on the high pressure shear modulus, our results here show that molybdenum triboride sample under uniaxial compression can support a differential stress of ～10?GPa when it started to yield with plastic deformation at ～30?GPa. In addition, we draw a conclusion that MoB₃ is not a superhard material but a hard material.     

Entanglement Dynamics of a Generic-Spin Model

We investigate the entanglement dynamics of a generic-spin model with weak external field. We first derive the time-dependent solutions of angular momentum operators with short-time approximation and then numerically calculate the entangled witness. It’s shown that one can dynamically generate quantum entanglement by adjusting coupling strength.     

阳极界面修饰对钙钛矿太阳能电池性能的影响

采用在聚(3,4-乙撑二氧噻吩)∶聚苯乙烯磺酸(Poly(3,4-ethylenedioxythiophene)∶Poly(styrenesulfonate),PEDOT∶PSS)阳极界面层上直接旋涂二甲基亚砜(Dimethyl Sulfoxide,DMSO)的方法,对PEDOT∶PSS薄膜进行修饰,以提高所制得的钙钛矿太阳能电池器件性能.在5000rpm转速条件下旋涂DMSO后,器件的能量转换效率达到11.43%,与PEDOT∶PSS阳极界面层未做任何修饰的器件相比,效率提高了29.15%.测试表征了修饰前后PEDOT∶PSS薄膜的透光性、表面形貌、电导率、器件的外量子效率曲线以及器件在光照和暗态下的J-V特性曲线,分析了器件性能提高的原因.结果表明:经过修饰的PEDOT∶PSS薄膜导电性显著增强,从而更加有利于器件阳极对空穴的抽取和收集;较未修饰时,器件的短路电流密度得到了大幅度提升,进而使得器件获得更高的能量转换效率.     

Ionic liquid-based electrolyte with dual-functional LiDFOB additive toward high-performance LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> batteries

Manganese oxide-based cathodes are one of the most promising lithium-ion battery (LIB) cathode materials due to their cost-effectiveness, high discharge voltage plateau (above 4.0 V vs. Li/Li⁺), superior rate capability, and environmental benignity. However, these batteries using conventional LiPF₆-based electrolytes suffer from Mn dissolution and poor cyclic capability at elevated temperature. In this paper, the ionic liquid (IL)-based electrolytes, consisting of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfon)imidate (PYR_1,4-TFSI), propylene carbonate (PC), lithium bis(trifluoromethanesulfon)imide (LiTFSI), and lithium oxalyldifluoroborate (LiDFOB) additive, were explored for improving the high temperature performance of the LiMn₂O₄ batteries. It was demonstrated that LiTFSI-ILs/PC electrolyte associated with LiDFOB addition possessed less Mn dissolution and Al corrosion at the elevated temperature in LiMn₂O₄/Li batteries. Cyclic voltammetry and electrochemical impedance spectroscopy implied that this kind of electrolyte also contributed to the formation of a highly stable solid electrolyte interface (SEI), which was in accordance with the polarization measurement and the Li deposition morphology of the symmetric lithium metal cell, thus beneficial for improving the cycling performance of the LiMn₂O₄ batteries at the elevated temperature. Cyclic voltammetry and electrochemical impedance spectroscopy implied that the cells using this kind of electrolyte exhibited better interfacial stability, which was further verified by the polarization measurement and the Li deposition morphology of the symmetric lithium metal cell, thus beneficial for improving the cycling performance of the LiMn₂O₄ batteries at the elevated temperature. These unique characteristics would endow this kind of electrolyte a very promising candidate for the manganese oxide-based batteries.     

MNA/PMMA有机薄膜光波导

研究出MNA/PMMA有机薄膜光波导。用棱镜耦合器进行了波导参数的测量,发现薄膜呈现各向异性,有较大的双折射。     

选择性双向顺序压缩感知重建动态磁共振成像

压缩感知是一种新兴技术,该技术能够用远低于奈奎斯特采样频率采集的信号恢复出原始信号. 压缩感知成像方法大大提高了心脏磁共振成像的采集速度,已有的方法主要利用动态图像时间相关及心脏的周期性运动特征,如采用在时间维做傅立叶变换或求解每帧数据跟参考帧数据的差异获取稀疏数据,满足压缩感知重建的要求. 该文提出了选择性双向顺序压缩感知重建算法,利用相邻帧的差异更小的特点,获取更加稀疏的差异数据,同时利用动态图像的周期性,以目标函数积分为判据,在时间顺序和时间逆序两个方向选择效果更好的方向进行数据重建,降低图像伪影和噪声. 该选择算法,可以在不增加重建时间的情况下,选择双向顺序重建中最佳的结果. 该文对心脏磁共振图像数据进行了数据处理实验,并且跟传统压缩感知算法、参考帧差异方法及匙孔成像方法进行了比较. 结果表明：该方法无论从视觉效果还是从统计结果上,都有很大的改善.