配位聚合物{[MnL][FeⅡFeⅢ(ox)3·1.5H2O]}∞的合成及其磁学性质

合成和表征了一种新的Schiff碱配合物MnL(ClO4)*3H2O(1)(其中L为n(水杨醛)∶n(二乙撑三胺)=1∶1缩合而成的Schiff碱).1与FeSO4*7H2O和K3[Fe(ox)3]*3H2O(ox=oxalate)进一步反应,生成了双金属层状配位聚合物{[MnL][FeⅡFeⅢ(ox)3]*1.5H2O}∞(2).IR和Mssbauer谱测定结果表明,2具有二维层状结构,其阴离子层由[FeⅡFeⅢ(ox)3]-单元构成.变温磁化率(5K～100K)测试结果表明,2中的自旋载体之间存在反铁磁交换作用.5K时的磁滞现象表明2在低温时可能存在铁磁有序,这可能是亚铁磁或自旋倾斜造成的.     

Gold(III) complexes with imidazole,benzoxazole, purine and pyrimidine derivatives

Summary The synthesis and characterization of Au^III complexes with several heterocyclic ligands are reported. The compounds have general formula [AuX₃(L)], where L =N-methylimidazole (N-MeIz),N-ethylimidazole (N-EtIz),N-propylimidazole (N-PrIz), benzoxazole (BO), 2-methylbenzoxazole (2-MeBO), 2,5-dimethylbenzoxazole (2,5-diMeBO), 2-amino-pyrimidine (2-APm), 4(6) -hydroxy-pyrimidine [4(6)-hydrPm] or hypoxanthine (Hypox) and X = Cl or Br. Elemental analysis, conductivity measurements and spectral studies were used for the characterization of the complexes. A square-planar geometry withN-bonded heterocyclic ligands is suggested.     

Simultaneous determination of neodymium, erbium and holmium in rare earth mixtures with 2-phenyltrifluoroacetone and octylphenol poly(ethyleneglycol) ether by third-derivative spectrophotometry

The complexes of the rare earth metals with 2-phenyltrifluoroacetone in the presence of TX-100 are reported. The characteristic absorbances of neodymium, holmium and erbium complexes can be increased by factors of 8.5, 31 and 15 respectively, compared to those of the cholrides. The third-derivative spectra have been used to eliminate the interference of cerium, and the sensitivities are increased again by factors of 7.4, 5.5 and 6.5. A method for the direct determination of neodymium, erbium and holmium in rare earth mixtures is proposed.     

Synthesis and Conformational Analysis of the Multidrug Resistance-Reversing Agent Hapalosin and Its Non-N-methyl Analog

Hapalosin was initially synthesized by macrolactonization, and a second synthesis was achieved by cycloamidation. In both syntheses, three of the five stereocenters in hapalosin were established by two Brown allylboration reactions. The synthesis of the non-N-Me analog of hapalosin involved chelation-controlled reduction of a gamma-amino-beta-keto ester and cycloamidation. In CDCl(3) at 25 degrees C, synthetic hapalosin exists as a 2.3:1 mixture of conformers, while its non-N-Me analog exists only as a single conformer. (1)H,(1)H-NOESY and computation reveal that the configuration of the amide bond is responsible for the conformations of the two compounds. The major conformer of hapalosin is found to be an s-cis amide, the minor conformer an s-trans amide, and the non-N-Me analog an s-trans amide. Applying distance constraints to protons that exhibit NOESY correlations, computation shows that the major conformer of hapalosin and the non-N-Me analog have very different conformations. By contrast, the minor conformer of hapalosin and the non-N-Me analog have very similar conformations.     

On-line Separation and Detection of Peptides by Capillary Electrophoresis / Electrospray FT-ICR-MS

Recently, capillary electrophoresis/electrospray ionization mass spectrometry (CE/ESI- MS) has been rapidly developed as a powerful analytical tool for charged species ranged from small molecules such as carboxylic acids1, phenolic compounds2, metal species3, tetramines4, herbicides5, drugs and drug metabolites6 to peptides and proteins7, 8. The ESI mode has proven to be sensitive, versatile and relatively easy to use in combination with CE. CE confers rapid analysis and efficient separ…     

Chemical Reactions and Kinetics of the Carbon Monoxide Coupling in the Presence of

The chemical reactions and kinetics of the catalytic coupling reaction of carbon monoxide to diethyl oxalate were studied in the presence of hydrogen over a supported palladium catalyst in the gaseous phase at the typical coupling reaction conditions. The experiments were performed in a continuous flow fixed-bed reactor. The results indicated that hydrogen only reacts with ethyl nitrite to form ethanol, and kinetic studies revealed that the rate-determining step is the surface reaction of adsorbed hydrogen and the ethoxy radical (EtO-). A kinetic model is proposed and a comparison of the observed and calculated conversions showed that the rate expressions are of rather high confidence.     

Epoxide networks as model networks

Summary The equilibrium mechanical behaviour of weak diepoxide-monoepoxide-diamine networks, prepared with an excess of diamine and measured in the rubbery state, was compared with theoretical predictions obtained by using the theory of branching processes. The experimental equilibrium moduli fit well the shape of theoretical curves over a broad range of crosslinking density regardless of whether the contribution by trapped entanglements is considered or not. The data fit equally well the theoretical dependence for the front factor A = 1 without entanglement contribution and forA = (f _e - 2)/f _e , (f _e is the average effective functionality of a junction) with an entanglement contribution based on the contact probability between any two units within elastically active network chains (Langley).Dedicated to Prof. Dr.G. Rehage on the occasion of his 60th birthday.With 5 figures     

Highly regioselective construction of spirocycles via phosphine-catalyzed [3 + 2]-cycloaddition

A direct entry to spirocycles with low to moderate regioselectivity was achieved by triphenylphosphine-catalyzed [3 + 2]-cycloaddition of active exo-methylenecycles (1) and ethyl 2,3-butadienoate (2). The regioselectivity of the reaction was greatly improved by using the bulky tert-butyl ester of the 2,3-butadienoate (5). The regioselectivity of the reaction was further enhanced by using the tert-butyl 2-butynoate as the substrate. This protocol provided an efficient entry to the skeleton of spirocarbocycles, especially spiro[4.n]alkanes.     

微区X射线荧光光谱成像法分析历史文物建筑混凝土材料成分及工艺

历史文物建筑修复与保护的首要步骤是对建材构件进行成分解析。但成型的混凝土构件成分复杂,传统技术难以直接分析。微区X射线荧光光谱具有速度快、无需前处理、可获得大面积高分辨的元素成像等优势,可用于此类混合物的原位分析。本文采用束斑为20μm的微区X射线荧光光谱仪,扫描成型混凝土构件以获得混合成分的元素分布图,结合基本参数定量法,对上海地区典型历史建筑混泥土构件进行元素定量。分析结果有效地解析了混凝土构建中骨料和凝胶材料的成分和含量,鉴别了涂层成分,解析了拌混工艺,鉴别了局部污染元素和致劣元素并分析致劣原因,为历史建筑修复材料选配、拌混工艺选择、除污及保护性预防劣化提供了科学的数据支撑。     

KEADA: Identifying Key Classes in Software Systems Using Dynamic Analysis and Entropy-Based Metrics

Software maintenance is indispensable in the software development process. Developers need to spend a lot of time and energy to understand the software when maintaining the software, which increases the difficulty of software maintenance. It is a feasible method to understand the software through the key classes of the software. Identifying the key classes of the software can help developers understand the software more quickly. Existing techniques on key class identification mainly use static analysis techniques to extract software structure information. Such structure information may contain redundant relationships that may not exist when the software runs and ignores the actual interaction times between classes. In this paper, we propose an approach based on dynamic analysis and entropy-based metrics to identify key classes in the Java GUI software system, called KEADA (identifying KEy clAsses based on Dynamic Analysis and entropy-based metrics). First, KEADA extracts software structure information by recording the calling relationship between classes during the software running process; such structure information takes into account the actual interaction of classes. Second, KEADA represents the structure information as a weighted directed network and further calculates the importance of each node using an entropy-based metric OSE (One-order Structural Entropy). Third, KEADA ranks classes in descending order according to their OSE values and selects a small number of classes as the key class candidates. In order to verify the effectiveness of our approach, we conducted experiments on three Java GUI software systems and compared them with seven state-of-the-art approaches. We used the Friedman test to evaluate all approaches, and the results demonstrate that our approach performs best in all software systems.