Helical Biphenyl Bisazo Polyurethane: Preparation,Characterization and Analysis of Polymeric Thermo-Optic Switch

The bisazo chromophore molecule (CAAPM) and helical biphenyl bisazo polyurethane (HBBPU) were synthesized. The structures of CAAPM and HBBPU were characterized by FT-IR and UV-vis spectroscopic techniques. The measurements of refractive index and thermo-optic coefficient (dn/dT) of HBBPU were demonstrated at different wavelengths and different temperatures by the ATR technique. By using CCD digital imaging devices, transmission loss of the internal waveguide was measured. The refractive index dispersions and Sellmeyer coefficients of HBBPU were obtained by the Sellmeyer equation. A Y-branched switch based on the thermo-optic effect was proposed and the performance of the switch was simulated. With a branching angle of 0.143° and the FD-BPM method, the result showed that the power consumption of the thermo-optic switch could be only 3.6 mW, and the response time of the switch could reach about 8 ms. This is a significant improvement in reducing power consumption compared with the normal Y-branched polymer thermo-optic switch.     

Detection, quantification, and identification of dermorphin in equine plasma and urine by LC–MS/MS for doping control

Dermorphin is a unique opioid peptide that is 30–40 times more potent than morphine. It was misused and went undetected in horse racing until 2011 when intelligence obtained from a few North American race tracks suggested its use. To prevent such misuse, a reliable analytical method became necessary for detection and identification of dermorphin in post-race horse samples. This paper describes the first liquid chromatography–tandem mass spectrometry (LC–MS/MS) method for such a purpose. Equine plasma and urine samples were pre-treated with ethylenediamine tetra-acetic acid and urea prior to solid-phase extraction (SPE) on Oasis MCX cartridges. Resulting eluates were dried under vacuum and analyzed by LC–MS/MS for dermorphin. The matrix effect, SPE efficiency, intra-day and inter-day accuracy and precision, and stability of the analyte were assessed. The limit of detection was 10 pg/mL in plasma and 20 pg/mL in urine, and the limit of confirmation was 20 pg/mL in plasma and 50 pg/mL in urine. Dermorphin in plasma is stable at ambient temperature, but its diastereomer is unstable. With isotopically labeled dermorphin as an internal standard, the quantification range was 20–10,000 pg/mL in plasma and 50–20,000 pg/mL in urine. The intra-day and inter-day accuracy was from 91 % to 100 % for the low, intermediate, and high concentrations. The intra-day and inter-day coefficients of variation were less than 12 %. The method differentiates dermorphin from its diastereomer. This method is very specific for identification of dermorphin in equine plasma and urine, as assessed by BLAST search and targeted SEQUEST search, and by MS/MS spectrum library search. The method has been successfully applied to analysis of samples collected following dermorphin administration to research horses and of official post-race samples.

A rapid and convenient method for preparative separation of three indissolvable polyphenols from Euphorbia pekinensis by the flexible application of solvent extraction combined with counter‐current chromatography

A rapid and convenient method was established to preparatively isolate the three ellagic acid types of compounds, which were the main polyphenols in Euphorbia pekinensis, by flexibly applying solvent extraction combined with counter‐current chromatography (CCC). The total extract (extracted using 95% ethanol) of E. pekinensis was pretreated by two simple steps before CCC isolation, following the procedure: the total extract was extracted by classical solvent extraction using petroleum ether and ethyl acetate, respectively, and then the ethyl acetate extract was suspended using 95% ethanol, after being allowed to stand overnight, the sediment was obtained. Partial sediment (100 mg) was then directly separated by CCC with a two‐phase solvent system composed of chloroform‐95% ethanol‐water‐85% formic acid (50:50:50:5, v/v/v/v). About 22 mg of 3,3′‐dimethoxy ellagic acid (1), 12 mg of 3,3′‐di‐O‐methyl‐4‐O‐(β‐d ‐xylopyranosyl)ellagic acid (2), and 35 mg of ellagic acid (3) with purities of 96.0, 95.2, and 95.4% were obtained respectively in one step within 4 h. After being purified by washing with methanol, the purities of the three compounds obtained were all above 98%. The purities were determined by HPLC and their chemical structures were further identified by ¹H and ¹³C NMR spectroscopy. The recoveries were calculated as 84.6, 85.7, and 89.5%, respectively. The result demonstrated that the present isolation method was rapid, economical and efficient for the preparative separation of polyphenols from E. pekinensis.     

Antimicrobial,anticancer and DNA binding studies of transition metal(II) complexes containing 2-phenyl-4-selenazole carboxylic acid

Science China Chemistry - Three novel transition metal complexes [ML2(phen)]·H2O (M= Mn, Co, Zn; HL= C10H7O2NSe, 2-phenyl-4-selenazole carboxylic acid, phen= 1,10-phenanthroline) 1～3...     

A Highly Oxidizing and Isolable Oxoruthenium(V) Complex [RuV(N4O)(O)]2+: Electronic Structure,Redox Properties,and Oxidation Reactions Investigated by DFT Calculations

The electronic structure and redox properties of the highly oxidizing, isolable Ru^V?O complex [Ru^V(N₄O)(O)]²⁺, its oxidation reactions with saturated alkanes (cyclohexane and methane) and inorganic substrates (hydrochloric acid and water), and its intermolecular coupling reaction have been examined by DFT calculations. The oxidation reactions with cyclohexane and methane proceed through hydrogen atom transfer in a transition state with a calculated free energy barrier of 10.8 and 23.8 kcal mol^?1, respectively. The overall free energy activation barrier (ΔG^≠=25.5 kcal mol^?1) of oxidation of hydrochloric acid can be decomposed into two parts: the formation of [Ru^III(N₄O)(HOCl)]²⁺ (ΔG=15.0 kcal mol^?1) and the substitution of HOCl by a water molecule (ΔG^≠=10.5 kcal mol^?1). For water oxidation, nucleophilic attack on Ru^V?O by water, leading to O? O bond formation, has a free energy barrier of 24.0 kcal mol^?1, the major component of which comes from the cleavage of the H? OH bond of water. Intermolecular self‐coupling of two molecules of [Ru^V(N₄O)(O)]²⁺ leads to the [(N₄O)Ru^IV? O₂? Ru^III(N₄O)]⁴⁺ complex with a calculated free energy barrier of 12.0 kcal mol^?1.     

Development of a rapid method for the simultaneous separation and determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol and its N- and O-glucuronides in human urine by liquid chromatography–tandem mass spectrometry

Determination of the tobacco-specific nitrosamine metabolite 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) and its N- and O-glucuronides (NNAL-N-Gluc and NNAL-O-Gluc) is important for toxicology analysis of tobacco smoke induced carcinogenicity and the understanding of detoxification mechanisms of the carcinogenic nitrosamine in humans. But previously reported indirect measurement methods involving enzymolysis and base treatment steps were tedious and time-consuming. In this work, a direct measurement method for simultaneous determination of urinary NNAL, NNAL-N-Gluc and NNAL-O-Gluc by liquid chromatography–tandem mass spectrometry (LC–MS/MS) in a single run was developed for the first time without the need to perform enzymatic or base hydrolysis. Urine samples were purified using dichloromethane and further extracted by solid-phase extraction. Then they were analyzed by LC–MS/MS operated in electrospray positive ionization mode. Chromatographic separation was achieved on a Phenomenex Kinetex PFP column within 6 min. The proposed method was validated and the results demonstrated that the method can produce satisfactory recoveries and reproducibility for the analytes. The applicability of this newly developed method was investigated for the simultaneous analysis of the three metabolites in smokers’ urine and the obtained results were comparable to those detected using the conventional enzymolysis method.     

Enhancement of sensitivity of paper-based sensor array for the identification of heavy-metal ions

Paper-based microfluidic devices have been widely investigated in recent years. Among various detection techniques, colorimetric method plays a very important role in paper-based microfluidic devices. The limitation, however, is also clear: they generally require highly sensitive indicators. In this work, we have developed a novel enrichment-based paper test for the discrimination of heavy-metal ions. Comparing to regular paper-based microfluidic devices, enrichment-based technique showed largely improved sensitivity. Combining with eight pyridylazo compounds and array technologies-based pattern-recognition, we have obtained the discrimination capability of eight different heavy-metal ions at same concentration as low as 50 μM using our enrichment-based pyridylazo compounds array paper. Identification of the heavy-metal ions was readily achieved using a standard chemometric approach. This method can be, of course, used for other analytes as well.     

Experimental Evidence for Ion Accumulation Time Affecting Qualitative and Quantitative Analysis of Ophiopogons in Ophiopogon Extract by Hybrid Ion Trap Time-of-Flight Mass Spectrometry

The qualitative and quantitative capability of the ion trap mass analyzer could be greatly affected by the accumulation time. However, the importance of the accumulation time has not so far been thoroughly explored. Here, the influence of ion accumulation time on qualitative and quantitative analysis of complicated components was systematically investigated based on the case study of 40 ophiopogonins in Ophiopogon extract by hybrid ion trap time-of-flight mass spectrometry (LCMS-IT-TOF). In this process, the accumulation time was set at 10, 25, 50, 100, and 200 ms, respectively. The effect of accumulation time on qualitative analysis of ophiopogonins was studied by comparing the total ion current (TIC) of MS¹, TIC of MS², and the number and signal of fragmental ions. The results demonstrated that the signal could be greatly influenced by varying the accumulation time. The number and signal of the fragmental ions were increased significantly with a longer accumulation time in the range of 10–100 ms. Also, the effect of accumulation time on quantitative analysis of ophiopogonins was investigated by comparing the linearity, accuracy, and precision measured on LCMS-IT-TOF. Importantly, quantitative parameters could all be significantly improved by choosing an appropriate accumulation time.

     

Multiple discrete energy levels and the bistable state of weak anchoring NLC cells

The weak anchoring nematic liquid crystal (NLC) cell is investigated with regard to energy. Because the Gibbs free energy of liquid crystal system used in theory does not include temperature and entropy, and because the equations and boundary conditions for δG=0 are also the mechanical equilibrium conditions of the continuum, the Gibbs free energy G is equivalent to the energy E of the liquid crystal continuum. There are multiple solutions which satisfy these equations and boundary conditions, each solution corresponding to a certain energy value. We call these discrete energy values and energy levels. Adopting a simple liquid crystal cell model, the energy levels are calculated in detail by means of analytical and numerical methods. The results show that there are three energy levels (or more in certain cases). The values and sequence of the energy levels are related to the external field and anchoring parameters. The relationships between the energy level structure and the bistable. Fréedericksz transition are disussed, together with their influence on the response time. The physical condition for the existence of more than three energy levels is also given.     

Preparation and properties of highly birefringent liquid crystalline materials: styrene monomers with acetylenes,naphthyl, and isothiocyanate groups

Two new series of styrene monomers with different alkyl chain length were successfully synthesised. The chemical structures of synthetic intermediates and monomers were confirmed by Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance spectroscopy, mass spectrometry and elemental analysis. Their thermal stability, transition temperatures and phase sequences were investigated by polarised light microscopy, thermogravimetric analysis, differential scanning calorimetry and one-dimensional wide-angle X-ray diffraction. The birefringent and photoelectric properties, UV–vis and fluorescence spectroscopy were also measured using Abbe refractometer and fluorescent apparatus. The results indicated that all the monomers exhibited a liquid crystalline phase at higher temperature, high birefringence values between 0.4 and 0.7, and good photoluminescence properties. Optical anisotropy of homologous molecules was reduced with the increase of alkyl chain length due to the decrease of molecular polarisation. Moreover, a significant effect of the chemical structure on the photoluminescence properties was also found and discussed according to the length of π-conjugation.