氘化对KH2PO4晶体微观缺陷影响的正电子湮没研究

采用传统降温法从不同程度氘化(x=0, 0.51, 0.85)的生长溶液中生长氘化KH₂PO₄(KDP) 晶体, 利用正电子湮没技术(正电子寿命谱和多普勒展宽谱)、结合X射线衍射谱(XRD) 结构分析, 对KDP晶体氘化生长的微观缺陷进行了研究, 讨论了氘化程度对晶体内部微观结构特性、缺陷类型和浓度的影响. XRD结果显示晶胞参数a, b值随氘含量的增加而增加, c值无明显变化; 正电子寿命谱结果发现随着氘化浓度的提高, KDP晶体内部中性填隙缺陷以及氧缺陷不断增加, 引起晶体晶格畸变; 氢空位、K空位、杂质替位缺陷不断发生缔合反应形成复合缺陷, 缺陷浓度不断减少; 团簇、微空洞等大尺寸缺陷也在不断发生聚合反应, 缺陷浓度表现为不断减少. 多普勒实验结果表明随着氘化程度的提升, 晶体内部各类缺陷表现为同步变化. 实验结果表明, KDP晶体在低浓度氘化生长(50%以内)下缺陷反应较弱, 而在高浓度氘化(50%以上)下的缺陷反应显著增强.     

Temperature Dependence of 1H Paramagnetic Chemical Shifts in Actinide Complexes,Beyond Bleaney's Theory: The AnVIO22+–Dipicolinic Acid Complexes (An=Np,Pu) as an Example

Actinide +VI complexes ( = , and ) with dipicolinic acid derivatives were synthesized and characterized by powder XRD, SQUID magnetometry and NMR spectroscopy. In addition, and complexes were described by first principles CAS based and two-component spin-restricted DFT methods. The analysis of the ¹H paramagnetic NMR chemical shifts for all protons of the ligands according to the X-rays structures shows that the Fermi contact contribution is negligible in agreement with spin density determined by unrestricted DFT. The magnetic susceptibility tensor is determined by combining SQUID, pNMR shifts and Evans’ method. The SO-RASPT2 results fit well the experimental magnetic susceptibility and pNMR chemical shifts. The role of the counterions in the solid phase is pointed out; their presence impacts the magnetic properties of the complex. The temperature dependence of the pNMR chemical shifts has a strong contribution, contrarily to Bleaney's theory for lanthanide complexes. The fitting of the temperature dependence of the pNMR chemical shifts and SQUID magnetic susceptibility by a two-Kramers-doublet model for the complex and a non-Kramers-doublet model for the complex allows for the experimental evaluation of energy gaps and magnetic moments of the paramagnetic center.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Predicting hiCE inhibitors based upon pharmacophore models derived from the receptor and its ligands

Human intestinal carboxyl esterase (hiCE) is a drug target for ameliorating irinotecan-induced diarrhea. By reducing irinotecan-induced diarrhea, hiCE inhibitors can improve the anti-cancer efficacy of irinotecan. To find effective hiCE inhibitors, a new virtual screening protocol that combines pharmacophore models derived from the hiCE structure and its ligands has been proposed. The hiCE structure has been constructed through homology techniques using hCES1’s crystal structure. The hiCE structure was optimized via molecular dynamics simulations with the most known active hiCE inhibitors docked into the structure. An optimized pharmacophore, derived from the receptor, was then generated. A ligand-based pharmacophore was also generated from a larger set of known hiCE inhibitors. The final hiCE inhibitor predictions were based upon the virtual screening hits from both ligand-based and receptor-based pharmacophore models. The hit rates from the ligand-based and receptor-based pharmacophore models are 88% and 86%, respectively. The final hit rate is 94%. The two models are highly consistent with one another (85%). This proves that both models are reliable.     

Microwave‐Assisted Synthesis of Ethyl 1,3‐Disubstituted‐1,6‐dihydropyrrolo[2,3‐c]pyrazole‐5‐carboxylates

A novel series of ethyl 1,3‐disubstituted‐1,6‐dihydropyrrolo[2,3‐c]pyrazole‐5‐carboxylates can be rapidly and efficiently synthesized in excellent yields by condensing a variety of 1,3‐substituted‐4‐formyl‐5‐chloropyrazole with ethyl isocyanoacetate in the presence of 1‐methyl‐3‐butylimidazolium hydroxide under microwave irradiation. The simple experimental procedure, DMSO‐free condition, short period of conversion, and excellent yields are the advantages of the present method. The structures of the novel compounds are confirmed by IR, ¹H NMR, ¹³C NMR, MALDI‐TOF MS, and elemental analysis.     

Syngas production from methane over CeO2-Fe2O3 mixed oxides using a chemical-looping method

A series of mixed oxides Ce_{1 ? x} Fe _x O₂ was prepared by a hydrothermal method. XRD and Raman spectra were measured to study the structure of the prepared materials. The temperature-programmed reduction was undertaken to estimate reducibility of the oxides. Syngas generation from methane using these materials as oxygen carriers/catalysts via a chemical-looping procedure was investigated in detail. This procedure includes catalytic oxidation and decomposition of methane to produce H₂-rich gas at the first step followed by the production of the CO-rich gas by oxidizing the carbon deposited on deactivated catalysts. The results showed that all iron ions were incorporated into the ceria lattice with the formation of oxygen vacancies in the Ce_0.9Fe_0.1O₂ sample, while isolated Fe₂O₃ particles were distributed on the surface of the Ce_0.8Fe_0.2O₂ sample. TPR measurements and the analysis of the two-step chemical-looping reactions indicated a strong interaction between the Ce and Fe species which accounts for an increased activity of the mixed oxides in the syngas generation compared to that of individual oxides. Among the several samples, the Ce_0.8Fe_0.2O₂ catalyst showed the highest activity for methane partial oxidation due to the synergetic effects caused by the interaction of surface iron entities and Ce-Fe solid solution. In addition, selective oxidation of carbon by oxygen to CO can also be found over this material since gaseous products are formed at the carbon oxidation step with the selectivity to CO reaching 91.2%. Evidence is presented that syngas can be feasibly produced from methane with high selectivity via the chemical-looping procedure over the CeO₂-Fe₂O₃ mixed oxides.     

Reductive Coupling of Aldehydes,Ketones and Aroyl Chlorides Induced by LVT Prepared from TiCl4/Al System

Aluminium powder has been used to reduce titanium tetrachloride to generate the low valent titanium (LVT)reagent which can induce the reductive coupling of aldehydes and ketones to form the corresponding pinacols or olefins. However, arylsulfonyl chlorides will give diaryldisulfides under the same condition.     

Diastereoselective Synthesis of γ-Butenolides Catalyzed by Potassium tert-Butoxide

Potassium tert-butoxide (0.1 mol%) catalyzed a vinylogous Mukaiyama aldol reaction between aromatic and aliphatic aldehydes with 2-(trimethylsilyloxy)furan. The corresponding γ-butenolides were obtained in good yields with good diastereoselectivities.     

Improvement in Uranium Adsorption Properties of Amidoxime-Based Adsorbent Through Cografting of Amine Group

Amidoxime (AO)/amine co-functionalized polypropylene fiber adsorbents were prepared. The all-polymeric structures were characterized by using Fourier transform infrared spectroscopy (FTIR), optical microscope, contact angle meter and electron spin resonance (ESR) analysis methods, confirming the grafting, modification, and amidoximation stages gravimetrically, spectroscopically, and visually. The properties for the removal of uranyl(VI) from aqueous solutions were investigated. For amidoxime (AO) fiber, high adsorption rate was observed within the first 30 minutes and the plateau value of 40.6% uranium loading (0.0812 mg/g) was reached at around 30 minutes. The adsorption equilibrium for AO/amine fiber was attained within 20 minutes, resulting in the adsorption of 92.6% uranium loading (0.185 mg/g). The percentage of adsorption increases with increasing pH value (2–6), reaches a maximum at pH 6.0 and then remains almost constant for AO/amine fiber, whereas reduces slightly for AO fiber.     

Isolation and Characterization of Urethanase from Penicillium variabile and Its Application to Reduce Ethyl Carbamate Contamination in Chinese Rice Wine

A strain with urethanase activity was isolated from mouse gastrointestine. By combination of morphological characterization of the colony, hyphae, and spore and the sequence analysis of its rDNA ITS, the strain was determined as Penicillium variabile and named as P. variabile JN-A525. The enzymatic properties of urethanase from P. variabile JN-A525 were further studied. The optimum temperature and pH value of urethanase are of 50 °C and 6.0, respectively. The enzyme maintains stability when the temperature is below 50 °C and the pH is in the range of 7.0–10.0. The enzyme also exhibits ethanol tolerance. It can remove ethyl carbamate from Chinese rice wine without the change of flavor substances in the wine.