微波消解-电感耦合等离子体质谱(ICP-MS)法测定拟黑多刺蚁中11种微量元素

为准确定量拟黑多刺蚁体内的微量元素,采用微波消解法,以HNO_(3)-H_(2)O_(2)混合酸为消解体系对样品进行前处理,选择合适的同位素,以^(103)Rh为内标测定^(52)Cr、^(55)Mn、^(60)Ni、^(63)Cu、^(66)Zn、^(75)As、^(78)Se、^(88)Sr和^(114)Cd,以^(185)Re为内标测定^(202)Hg和^(208)Pb,建立了电感耦合等离子体质谱法测定拟黑多刺蚁中11种微量元素的方法。实验发现,以HNO_(3)-H_(2)O_(2)为消解体系,样品消解完全;采用KED模式消除质谱干扰,以内标法校正基体效应;通过绘制校准曲线及测定流程空白,各元素校准曲线的相关系数均大于0.999,方法检出限为0.0005~0.011 mg/kg,方法定量限为0.0016~0.033 mg/kg。对拟黑多刺蚁实际样品进行测定,各元素的相对标准偏差(RSD,n=9)在1.2%~5.5%,加标回收率为91.2%~107%;经过实验室间比对实验,相对偏差为-3.15%~2.74%;测定六个不同产地的拟黑多刺蚁样品,结果显示不同产地样品除Cd外,其他10种微量元素的含量均存在较大差异。测定结果稳定可靠,能满足拟黑多刺蚁中11种微量金属元素含量的分析检测要求。     

基于光子筛的软X光谱仪

 介绍了采用新型软X光谱学光子筛作为分光元件的软X光谱仪的原理和结构参数设计。新谱仪理论测量范围为100 eV~2 keV,光谱分辨力达0.35 nm。应用该谱仪在SILEX-Ⅰ装置上测量了飞秒激光与固体铜靶相互作用产生的X射线发射谱。实验结果表明,该谱仪主要性能指标达到设计要求,适合于激光与等离子体相互作用产生的软X射线研究。     

基于均匀化理论的多孔板弯曲问题新解

由于密集型分布孔的存在,通常的有限元法不能有效地分析多孔板的弯曲问题.该文基于均匀化理论建立了该类问题的新解法.对含密集型分布的阶梯型圆孔板的分析结果,说明了该文方法是有效的.     

Synthesis of enantiomeric-pure cyclohexenyl nucleoside building blocks for oligonucleotide synthesis

Lipases were used for the resolution of (±) (4aR, 7R, 8aS)-2-phenyl-4a,7,8,8a-tetrahydro-4H-1,3-benzodioxine. This separation was carried out on preparative scale and used for the synthesis of eight phosphoramidites of cyclohexenyl nucleosides (d- and l-series).     

Facile synthesis of novel indolo[3,2-b]carbazole derivatives and a chromogenic-sensing 5,12-dihydroindolo[3,2-b]carbazole

Novel indolo[3,2-b]carbazole derivatives and a chromogenic-sensing 5,12-dihydroindolo[3,2-b]carbazole have been synthesized starting from tetra-tert-butylated 6,12-diaryl-5,11-dihydroindolo[3,2-b]carbazoles, which were prepared via an efficient tert-butylation of 6,12-diaryl-5,11-dihydroindolo[3,2-b]carbazoles.     

Characterization, synthesis and self-aggregation of (-)-alternarlactam: a new fungal cytotoxin with cyclopentenone and isoquinolinone scaffolds

(-)-Alternarlactam [(-)-1], a new promising cytotoxin against two human cancer cell lines, was isolated from an endophyte culture and synthesized (along with (+)-1) from readily available starting materials. The absolute configuration, chirality-activity relevance and self-aggregation of (-)-1 were assigned by a combination of synthetic, spectroscopic and computational approaches. The full characterization of the new fungal cytotoxin may provide valuable information in the discovery of new antitumor agents.     

Thioketone‐Directed Palladium(II)‐Catalyzed C−H Arylation of Ferrocenes with Aryl Boronic Acids

A palladium(II)‐catalyzed thioketone‐chelation‐assisted direct C?H arylation of ferrocenes is described. With thioketone as an efficient directing group, various monoaryl‐ and diaryl‐substituted thiocarbonylferrocenes were obtained by palladium‐catalyzed direct C?H functionalization in high yields under mild and base‐free reaction conditions. Furthermore, the arylated thiocarbonylferrocene could undergo diverse transformations.     

A new simple and rapid electrochemical method for the determination of hydroxyl radical generated by Fenton reaction and its application

A simple and rapid electrochemical method to detect the hydroxyl radical is described. This method employed the reaction between.OH and dimethyl sulfoxide (DMSO) to generate quantitatively formaldehyde, which then reacted with hydrazine hydrochloride at pH 6.2. The product showed a second-order derivative cathodic wave with the peak potential of -1.08 V( vsSCE) by single sweep oscillopolarography. The electrochemical behavior of the product was investigated by single sweep oscillopolarography and cyclic voltammetry. The experimental conditions for the measurement were optimized and the scavenging activity of some flavonoids on hydroxyl radicals was studied.     

激励射流在超声速流场中的混合的特性研究

Hartmann-Sprenger（H-S）管处于吞吐模式下可以产生高频高幅度的气流振荡。本文将H-S管集成到传统射流装置中形成激励射流,研究其在超声速流场中的混合特性。本文设计了三种频率的CO2激励射流,将其横向注入马赫数2.5的均匀超声速来流当中。采用平面激光散射技术对其进行瞬态可视化成像,利用组分采样、测量总压进行时均分析。结果表明:H-S激励射流可以有效提高射流穿透深度,形成较多大尺度结构,从而获得较好的混合效果。关键词: 激励射流 超声速混合 穿透深度 大尺度结构      

Fabrication of superhydrophobic surfaces from binary colloidal assembly

In this work, superhydrophobic surfaces were derived from binary colloidal assemblies. CaCO(3)-loaded hydrogel spheres and silica or polystyrene ones were consecutively dip-coated on silicon wafers. The former assemblies were recruited as templates for the latter self-assembly. Due to the hydrophilicity difference between silicon wafers and CaCO(3)-loaded hydrogel spheres, the region selective localization of silica or polystyrene spheres leads to irregular binary structures with a hierarchical roughness. The subsequent modification with low surface energy molecules yields a superhydrophobic surface. The heating treatment may largely enhance the mechanical stability of the resulting binary structures, which allows regeneration of the surface superhydrophobicity, providing a good durability in practice.