Spherical silica particles decorated with graphene oxide nanosheets as a new sorbent in inorganic trace analysis

Graphene oxide (GO) is a novel material with excellent adsorptive properties. However, the very small particles of GO can cause serious problems is solid-phase extraction (SPE) such as the high pressure in SPE system and the adsorbent loss through pores of frit. These problems can be overcome by covalently binding GO nanosheets to a support. In this paper, GO was covalently bonded to spherical silica by coupling the amino groups of spherical aminosilica and the carboxyl groups of GO (GO@SiO₂). The successful immobilization of GO nanosheets on the aminosilica was confirmed by scanning electron microscopy and X-ray photoelectron spectroscopy. The spherical particle covered by GO with crumpled silk wave-like carbon sheets are an ideal sorbent for SPE of metal ions. The wrinkled structure of the coating results in large surface area and a high extractive capacity. The adsorption bath experiment shows that Cu(II) and Pb(II) can be quantitatively adsorbed at pH 5.5 with maximum adsorption capacity of 6.0 and 13.6 mg g⁻¹, respectively. Such features of GO nanosheets as softness and flexibility allow achieving excellent contact with analyzed solution in flow-rate conditions. In consequence, the metal ions can be quantitatively preconcentrated from high volume of aqueous samples with excellent flow-rate. SPE column is very stable and several adsorption–elution cycles can be performed without any loss of adsorptive properties. The GO@SiO₂ was used for analysis of various water samples by flame atomic absorption spectrometry with excellent enrichment factors (200–250) and detection limits (0.084 and 0.27 ng mL⁻¹ for Cu(II) and Pb(II), respectively).     

A Mechanistic Study on the Oxidative Degradation of Dibenzazepine Derivatives by Manganese(III) Complexes in Acidic Sulfate Media

The oxidative degradation of tricyclic antidepressants (TCA) was studied in the presence of a large excess of the oxidizing agent manganese(III) and its reduced form manganese(II) sulfate in acidic media. The products were detected and identified using UV–vis, ESI‐MS, IR, and EPR methods. The mechanism of the reaction was studied for the following two classes of TCA: 10,11‐dihydro‐5H‐dibenz[b, f]azepines and dibenz[b, f]azepines. The oxidative degradation between dibenz[b, f]azepines and the manganese(III) ions resulted in the formation of substituted acridine with the same substituent as in the origin dibenz[b, f]azepine derivative. The pseudo–first‐order rate constants (k_obs) were determined for the degradation process. The dependences of the observed rate constants on the [Mn^III] with a zero intercept were linear. The reaction between 10,11‐dihydro‐5H‐dibenz[b, f]azepines, and the manganese(III) sulfate ion resulted in oxidative dehydrogenation, which proceeded via the formation of the following two intermediates: a free organic radical and a dimer. Further oxidation of the second intermediate led to a positively charged radical dimer as the single final product. Linear dependences of the pseudo–first‐order rate constants (k_obs) on the [Mn^III] with a zero intercept were established for the degradation of 10,11‐dihydro‐5H‐dibenz[b, f]azepines. The observed rate constants were dependent on the [H⁺] and independent of the [TCA] within the excess concentration range of the manganese(III) complexes used in the isolation method. The radical product of the degradation of 10,11‐dihydro‐5H‐dibenz[b, f]azepines was not stable in the aqueous solution and was subsequently transformed to a nonradical dimer in the next slower step. The observed rate constants were independent of the [Mn^III], independent of the [H⁺] and increased slightly with increasing TCA concentrations when TCA was used in excess. The mechanistic consequences of all of these results are discussed.     

Synthesis of Some Aminophosphonates Bearing N‐(Fluorophenyl)‐piperazynyl Moiety and Their Activity toward Serotonin Receptors

Syntheses of a series of compounds bearing a 1‐(fluorophenyl)piperazin‐4‐ylmethyl moiety, namely dialkyl 1‐(fluorophenyl)piperazin‐4‐ylmethyl phosphonates 3a–f , diethyl 2‐[1‐(fluorophenyl)piperazin‐4‐yl]‐ethyl phosphonates 4a,b , diethyl 3‐[1‐(4‐fluorophenyl)‐piperazin‐4‐yl]‐propyl phosphonate 5 , and di[1‐(fluorophenyl)piperazin‐4‐yl]methanes 6a,b were performed, and some of them were screened for their affinity for serotonin 5‐HT_1A, 5‐HT₆, and 5‐HT₇ receptors. Moderate interactions with these receptors were demonstrated.     

Unusual potassium-oxalate coordination in the two-dimensional trimetallic [CoCl(NH3)5][KCr(C2O4)3]·0.5H2O complex

A new heterometallic compound, [CoCl(NH₃)₅][KCr(C₂O₄)₃]·0.5H₂O (1), has been synthesized and characterized by elemental analysis, IR and electronic spectra, thermal analysis, variable temperature magnetic susceptibility measurements, and single crystal X-ray diffraction. Compound 1 consists of two-dimensional [{KCr(C₂O₄)₃}_n]^2n? layers, [CoCl(NH₃)₅]²⁺ ions and water molecules. Within the 2-D layer, three different types of oxalate coordination modes are present. Each K cation is coordinated by eight oxygen atoms from oxalate groups and also weakly interacts with the ninth oxygen atom. The extensive network of hydrogen bond is formed between the [KCr(C₂O₄)₃]^2? layer and the [CoCl(NH₃)₅]²⁺ ions. These interactions involve all hydrogen atoms of ammonia ligads and water molecule.     

Addition Reactions of Sulfenyl and Sulfinyl Chlorides with 3‐Phenyl‐1‐azabicyclo[1.1.0]butane

The reactions of 3‐phenyl‐1‐azabicyclo[1.1.0]butane with α‐chlorosulfenyl chlorides and sulfinyl chlorides lead to the corresponding sulfenamides and sulfinamides, respectively, which possess an azetidine ring. It is proposed that a two‐step mechanism occurs involving an intermediate carbenium ion, which is formed by the addition of the electrophile at the N‐atom and cleavage of the N(1)? C(3) bond. The structures of 9b and 10b are established by X‐ray crystallography.     

Prototypical triplet alkyl phosphonatocarbenes

The current case study focuses on the generation, identification, and characterization of two representative mono- and disubstituted alkyl phosphonatocarbenes by means of matrix isolation techniques in conjunction with density functional theory [B3LYP/6-311++G(d,p)] and coupled cluster [CCSD(T)/cc-pVXZ, X = D, T] computations. The EPR measurements identify both carbenes as triplet ground-state species with D values of 0.660 and 0.623 cm(-1), respectively, exhibiting persistency toward intramolecular reactions (the EPR signal observable in perfluoromethylcyclohexane up to around 70 K for the disubstituted molecule). While the reaction of the carbene center of the conformationally rich tetramethyl bisphosphonatocarbene with the CH bonds of the methyl groups leads to phosphaoxetane at room temperature, its fragmentation via a Wittig-type reaction during high vacuum flash pyrolysis (HVFP) results in dimethyl vinylphosphonate and methyl metaphosphate. The latter has been observed for the first time as an isolated entity.     

Compromising Science by Ignorant Instrument Calibration—Need to Revisit Half a Century of Published XPS Data

X‐ray photoelectron spectroscopy (XPS) is an indispensable technique in modern materials science for the determination of chemical bonding as evidenced by more than 10 000 XPS papers published annually. A literature survey reveals that in the vast majority of cases an incorrect referencing of the binding energy scale is used, neglecting warnings that have been formulated from the early days of the technique. Consequences for the data reliability are disastrous and decades of XPS work require revisiting. The purpose of this Viewpoint is to highlight the existing problems, review the criticism and suggest ways forward.     

Bases,solvates and salts: new benzimidazole‐ and pyridine‐scaffolded ligands

The intermolecular interactions in the structures of a series of Schiff base ligands have been thoroughly studied. These ligands can be obtained in different forms, namely, as the free base 2‐[(2E)‐2‐(1H‐imidazol‐4‐ylmethylidene)‐1‐methylhydrazinyl]pyridine, C₁₀H₁₁N₅, 1 , the hydrates 2‐[(2E)‐2‐(1H‐imidazol‐2‐ylmethylidene)‐1‐methylhydrazinyl]‐1H‐benzimidazole monohydrate, C₁₂H₁₂N₆·H₂O, 2 , and 2‐{(2E)‐1‐methyl‐2‐[(1‐methyl‐1H‐imidazol‐2‐yl)methylidene]hydrazinyl}‐1H‐benzimidazole 1.25‐hydrate, C₁₃H₁₄N₆·1.25H₂O, 3 , the monocationic hydrate 5‐{(1E)‐[2‐(1H‐1,3‐benzodiazol‐2‐yl)‐2‐methylhydrazinylidene]methyl}‐1H‐imidazol‐3‐ium trifluoromethanesulfonate monohydrate, C₁₂H₁₃N₆⁺·CF₃O₃S^?·H₂O, 5 , and the dicationic 2‐{(2E)‐1‐methyl‐2‐[(1H‐imidazol‐3‐ium‐2‐yl)methylidene]hydrazinyl}pyridinium bis(trifluoromethanesulfonate), C₁₀H₁₃N₅²⁺·2CF₃O₃S^?, 6 . The connection between the forms and the preferred intermolecular interactions is described and further studied by means of the calculation of the interaction energies between the neutral and charged components of the crystal structures. These studies show that, in general, the most important contribution to the stabilization energy of the crystal is provided by π–π interactions, especially between charged ligands, while the details of the crystal architecture are influenced by directional interactions, especially relatively strong hydrogen bonds. In one of the structures, a very interesting example of the nontypical F…O interaction was found and its length, 2.859 (2) Å, is one of the shortest ever reported.     

STM studies of fusion of cholesterol suspensions and mixed 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/cholesterol vesicles onto a Au(111) electrode surface

Electrochemical scanning tunneling microscopy (EC-STM) has been applied to study the structure of the film formed by fusion of cholesterol suspensions and mixed dimyristoylphosphatidylcholine (DMPC)/cholesterol vesicles on a Au(111) electrode surface. It has been demonstrated that cholesterol molecules assemble at the gold support into several structures templated by the crystallography of the metal surface and involving flat or edge-on adsorbed molecules. Studies of the film formed by fusion of mixed DMPC/cholesterol vesicles revealed that ordered domains of either pure DMPC or pure cholesterol were formed. These results indicate that, at the metal surface, the molecules released by the rupture of a vesicle initially self-assemble into a well-ordered monolayer. The self-assembly is controlled by the hydrocarbon skeleton-metal surface interaction. In the case of mixed DMPC/cholesterol vesicles, the molecule-metal interactions induce segregation of the two components into single component domains. However, the molecule-metal interaction induced monolayer is a transient phenomenon. When more molecules accumulate at the surface, the molecule-molecule interactions dominate the assembly, and the monolayer is transformed into a bilayer.