Spherical silica particles decorated with graphene oxide nanosheets as a new sorbent in inorganic trace analysis

Graphene oxide (GO) is a novel material with excellent adsorptive properties. However, the very small particles of GO can cause serious problems is solid-phase extraction (SPE) such as the high pressure in SPE system and the adsorbent loss through pores of frit. These problems can be overcome by covalently binding GO nanosheets to a support. In this paper, GO was covalently bonded to spherical silica by coupling the amino groups of spherical aminosilica and the carboxyl groups of GO (GO@SiO₂). The successful immobilization of GO nanosheets on the aminosilica was confirmed by scanning electron microscopy and X-ray photoelectron spectroscopy. The spherical particle covered by GO with crumpled silk wave-like carbon sheets are an ideal sorbent for SPE of metal ions. The wrinkled structure of the coating results in large surface area and a high extractive capacity. The adsorption bath experiment shows that Cu(II) and Pb(II) can be quantitatively adsorbed at pH 5.5 with maximum adsorption capacity of 6.0 and 13.6 mg g⁻¹, respectively. Such features of GO nanosheets as softness and flexibility allow achieving excellent contact with analyzed solution in flow-rate conditions. In consequence, the metal ions can be quantitatively preconcentrated from high volume of aqueous samples with excellent flow-rate. SPE column is very stable and several adsorption–elution cycles can be performed without any loss of adsorptive properties. The GO@SiO₂ was used for analysis of various water samples by flame atomic absorption spectrometry with excellent enrichment factors (200–250) and detection limits (0.084 and 0.27 ng mL⁻¹ for Cu(II) and Pb(II), respectively).     

Synthesis of new dendrimers—trimesic acid derivatives

The efficient synthesis of new dendrimeric polyesters up to generation 3 that consist of 1,3,5-benzenetricarboxylic acid building blocks with potential applications in drug delivery is described. The dendrimers possess hydroxy or allyl functional groups on the surface and were prepared through a divergent approach using readily available 2-(hydroxymethyl)-2-ethylpropan-1,3-diol and 1,3,5-benzenetrimethanol as central cores, with 3,5-bis[(allyloxy)methyl]benzoic acid being an essential unit of the dendrimer. The latter compound was synthesized, in high yield, from 1,3,5-benzenetricarboxylic acid, applying selective hydrolysis of the corresponding triester as the key step.     

The frequently overlooked importance of solvent in free radical syntheses

This tutorial review is designed to dispel the myth, still believed by many synthetic organic chemists, that radical-based syntheses are free from significant solvent effects. However, many synthetically valuable radical reactions do exhibit large kinetic solvent effects. It is therefore important to select the solvent for any proposed radical synthesis with considerable care if good product yields are to be achieved.     

Synthesis of unsymmetrical alkyl acetals via addition of primary alcohols to allyl ethers mediated by ruthenium complexes

Abstract  

Ru-catalyzed synthesis of mixed alkyl–alkyl acetals via addition of primary alcohols to allyl ethers has been extended to include long-chain and/or functionalized substrates. The catalytic systems for these reactions were generated from RuCl₂(PPh₃)₃ and [RuCl₂(1,5-COD)]_x and phosphines [PPh₃ or P(p-chlorophenyl)₃] or SbPh₃. Of particular importance is the almost quantitative elimination of transacetalization. The addition proceeds through allyl complexes, not via isomerization of allyl ethers––subsequent addition of ROH to vinyl ethers.     

Thiol-functionalized anthraquinones: mass spectrometry and electrochemical studies

Abstract  

In this work, the synthesis of various thiol-functionalized anthraquinone compounds is presented. The studied compounds were characterized by mass spectrometry and the main fragmentation pathways are discussed. The compounds studied formed stable self-assembled monolayers (SAMs) in the gold surface. The parameters for the reduction processes in the gold surface of the studied new anthraquinones were determined by cyclic voltamperometry tests.     

Anticonvulsant neuropeptides as drug leads for neurological diseases

Anticonvulsant neuropeptides are best known for their ability to suppress seizures and modulate pain pathways. Galanin, neuropeptide Y, somatostatin, neurotensin, dynorphin, among others, have been validated as potential first-in-class anti-epileptic or/and analgesic compounds in animal models of epilepsy and pain, but their therapeutic potential extends to other neurological indications, including neurodegenerative and psychatric disorders. Disease-modifying properties of neuropeptides make them even more attractive templates for developing new-generation neurotherapeutics. Arguably, efforts to transform this class of neuropeptides into drugs have been limited compared to those for other bioactive peptides. Key challenges in developing neuropeptide-based anticonvulsants are: to engineer optimal receptor-subtype selectivity, to improve metabolic stability and to enhance their bioavailability, including penetration across the blood–brain barrier (BBB). Here, we summarize advances toward developing systemically active and CNS-penetrant neuropeptide analogs. Two main objectives of this review are: (1) to provide an overview of structural and pharmacological properties for selected anticonvulsant neuropeptides and their analogs and (2) to encourage broader efforts to convert these endogenous natural products into drug leads for pain, epilepsy and other neurological diseases.     

A strategy for selection of reference materials in stable oxygen isotope analyses of solid materials

The propagation of uncertainties associated with the stable oxygen isotope reference materials through a multi-point normalisation procedure was evaluated in this study using Monte Carlo (MC) simulation. We quantified the normalisation error for a particular selection of reference materials and their number of replicates, when the choice of standards is restricted to either nitrates, sulphates or organic reference materials alone, and in comparison with when this restriction was relaxed. A lower uncertainty in stable oxygen isotope analyses of solid materials performed using High-Temperature Pyrolysis (HTP) can be readily achieved through an optimal selection of reference materials. Among the currently available certified reference materials the best performing pairs minimising the normalisation errors are USGS35 and USGS34 for nitrates; IAEA-SO-6 and IAEA-SO-5 for sulphates; and IAEA-601 and IAEA-602 for organic materials. The normalisation error can be reduced further--by approximately half--if each of these two analysed reference materials is replicated four times. The overall optimal selection among all nine considered reference materials is the IAEA-602 and IAEA-SO-6 pair. If each of these two reference materials is replicated four times the maximum predicted normalisation error will equal 0.22‰, the minimum normalisation error 0.12‰, and the mean normalisation error 0.15‰ over the natural range of δ(18)O variability. We argue that the proposed approach provides useful insights into reference material selection and in assessing the propagation of analytical error through normalisation procedures in stable oxygen isotope studies.     

Lipophilicity of Tetraarylporphyrins. Part 1. Tetra-(Hydroxyphenyl)Porphyrins with Long Alkyl Chain in the Molecule

JPC – Journal of Planar Chromatography – Modern TLC - In the phototherapeutic use of photosensitizers, lipophilicity is an important parameter that allows predicting their biological...     

Microporous {[Ni(cyclam)]3[W(CN)8]2}n affording reversible structural and magnetic conversions

Methanol adsorption into the porous 2D bimetallic coordination network {[Ni(cyclam)](3)[W(CN)(8)](2)}(n) (cyclam = 1,4,8,11-tetraazacyclotetradecane) causes significant modification of its structure and magnetic properties. Fully reversible transformations between the three states of the network: anhydrous, hydrated and methanol-modified are observed with the transition to the magnetic ordered state at T(c) equal to 4.9 K, 8.3 K and 11.4 K respectively. All three phases have a metamagnetic character but the methanol-modified one most easily turns to ferromagnetic and shows a hysteresis loop with coercivity field of 250 Oe. The differences in magnetic behaviour of the anhydrous and guest-induced forms of the compound are discussed in terms of changes in the structure: CN-bridge geometry and distance between the layers.