Activity measurements in the ternary system NaBr+NaClO4+H2O at 25°C

The activity coefficients of sodium bromide in the ternary system NaBr+NaClO₄+H₂O were determined at 25°C and constant ionic strength of 0.1, 0.5, 1, 2, and 3 mol-kg^?1 from emf of the cell without, liquid junction $$ISE - Na|NaBr(m_A ), NaClO_4 (m_B ), AgCl_{(s)} 1 Ag$$ The experimental activity coefficients were comparatively analyzed by using the Harned, Scatchard, Pitzer and Lim-HOLL treatments. All these methods are adequate for the analysis of the experimental data. The results have been compared with those of Lanier for the system: NaCl+NaClO₄+H₂O. The Gibbs excess energy of mixing was obtained and qualitatively interpreted in terms of ionic interactions.     

Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

Technetium(III), Technetium(II), and Technetium(I) Complexes with Pyridine Ligands. Can Pyridine Coordination Stabilize the Low Oxidation States of Technetium?

The substitution chemistry of TcCl(3)(PPh(3))(2)(CH(3)CN) is rather facile relative to the analogous rhenium complex, since both the chloride and phosphine ligands are easily substituted for various pyridine ligands. Consequently a series of Tc(III) complexes with amine, pyridine, and polypyridyl ligands were prepared and characterized by (1)H NMR and cyclic voltammetry. In addition, the zinc reduction of TcCl(4)(py)(2) in the presence of pyridine results in TcCl(2)(py)(4). Structural and spectroscopic data indicate that this Tc(II) complex exhibits strong metal-pyridine interactions characteristic of low-valent amine complexes of Re(II) and Os(II). For example, a decrease of 0.04 and 0.06 ? is observed for the trans-Tc-N bond length in TcCl(2)(py)(4 )relative to mer-TcCl(3)(pic)(3) and [TcCl(2)(py)(3)(PPh(3))](+), respectively. This ability of pyridine to function both as a strong sigma-donor and moderate pi-acid ligand has resulted in the isolation of technetium complexes in various oxidation states with similar ligand environments. As a result, a structural comparison of [TcCl(2)(py)(3)(PPh(3))](+), TcCl(2)(py)(4), TcCl(tpy)(py)(2), and other known Tc(III) and Tc(II) pyridine complexes is presented. Crystals of [TcCl(2)(py)(3)(PPh(3))]PF(6) are triclinic, with space group P&onemacr;, Z = 2, and lattice parameters a = 12.677(4) ?, b = 13.064(4) ?, c = 13.103(5) ?, alpha = 110.14(3) degrees, beta = 101.12(3) degrees, gamma = 96.61 degrees, V = 1959 ?(3), and R = 0.0615 (R(w) = 0.1148). Crystals of TcCl(2)(py)(4) are tetragonal, with space group I4(1)/acd, Z = 8, and lattice parameters a = 15.641(4) ?, c = 16.845(6) ?, V = 4121 ?(3), and R = 0.0373 (R(w) = 0.0290). Crystals of TcCl(tpy)(py)(2) are orthorhombic, with space group C222(1), Z = 4, and lattice parameters a = 9.359(3) ?, b = 16.088(6) ?, c = 18.367(4) ?, V = 2765 ?(3), and R = 0.0499 (R(w) = 0.0599).     

Characterization and determination of 28 elements in fly ashes collected in a thermal power plant in Argentina using different instrumental techniques

Different techniques were selected for comprehensive characterization of seven samples of fly ashes collected from the electrostatic precipitator of the San Nicolás thermal power plant (Buenos Aires, Argentina). Particle size was measured using laser based particle size analyzer. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the mineral phase present in the matrix consisting basically of aluminosilicates and large amounts of amorphous material. The predominant crystalline phases were mullite and quartz. Major and minors elements (Al, Ca, Cl, Fe, K, Mg, Na, S, Si and Ti) were detected by energy dispersive X-ray analysis (EDAX). Trace elements (As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, V and Zn) content was quantified by inductively coupled plasma optical emission spectrometry (ICP OES). Different acid mixtures and digestion procedures were compared for subsequent ICP OES measurements of the dissolved samples. The digestion procedures used were: i) a mixture of FH + HNO₃ + HClO₄ (open system digestion); ii) a mixture of FH + HNO₃ (MW-assisted digestion); iii) a mixture of HF and aqua regia (MW-assisted digestion). Instrumental neutron activation analysis (INAA) was employed for the determination of As, Ba, Co, Cr, Ce, Cs, Eu, Fe, Gd, Hf, La, Lu, Rb, Sb, Sc, Sm, Ta, Tb, Th, U and Yb. The validation of the procedure was performed by the analysis of two certified materials namely, i) NIST 1633b, coal fly ash and ii) GBW07105, rock. Mean elements content spanned from 41870 μg g^− 1 for Fe to 1.14 μg g^− 1 for Lu. The study showed that Fe (41870 μg g^− 1) ? V (1137 μg g^− 1) > Ni (269 μg g^− 1) > Mn (169 μg g^− 1) are the main components. An enrichment, with respect to crustal average, in many elements was observed especially for As, V and Sb that deserve particular interest from the environmental and human health point of view.     

Altered flavin patterns in photobehavioral mutants of Phycomyces blakesleeanus.

Flavins were extracted from sporangiophores of the lower fungus Phycomyces blakesleeanus and identified by HPLC with fluorescence detection. In the wild-type strain NRRL1555 they were found to be present at the following concentrations: riboflavin (5.5 x 10(-6) M), flavin mononucleotide (FMN) (4.0 x 10(-6) M) and flavin adenine dinucleotide (1.4 x 10(-6) M). The HPLC elution profiles of the wild type were compared to a set of behavioral mutants (genotype mad) with specific defects in their light-transduction pathway. The photoreceptor mutants C109 (madB), C111 (madB) and L1 (madC) had normal amounts of flavins. The most prominent changes were found in single mutants with a defective madA gene which contained about 25% of riboflavin and about 10% of FMN and FAD normally found in the wild type. A hypertropic mutant with a defective madH gene contained instead 80% of riboflavin and 120% of FMN and FAD. The double mutant L52 (madA madC) and the triple mutant L72 (madA madB madC) had normal amounts of FAD and FMN. This indicates that the madC mutation, which itself causes loss of light sensitivity and which affects the near-UV/blue-light receptor (Galland and Lipson, 1985, Photochem. Photobiol. 41, 331-335) functions as a restorer of the flavin content in a genetic madA background. The double mutant L51 (madA madB) had about 40% of FMN and FAD, suggesting that the madB mutation functions as a partial restorer of flavin content. The photogravitropic thresholds (450 nm) reported for the wild type and the madA and madH mutants were positively correlated to the endogeneous concentrations of FMN and FAD.(ABSTRACT TRUNCATED AT 250 WORDS)     

FORTY YEARS OF BLUE-LIGHT RESEARCH AND NO ANNIVERSARY

The status of near- UV/blue-light research is described and critically assessed. It is argued that the generally accepted proposition of flavins acting as near- UV/blue-light photoreceptors is reasonable, but that also other pigments, specifically pteridines and pterins, should be considered. In view of the fact that a receptor assay, applicable to any organism and near-UV/blue-light reaction, is not yet at hand, caution appears to be indicated as to what one can accept as a reasonable “criterion” for the involvement of any proposed photoreceptor pigment.     

Extension of the Linear Matching Method to frame structures made from a material that exhibits softening

This paper considers the problem of evaluating the maximum load that an elastic–plastic frame structure can withstand when material or element softening is present. Here we propose an extension of the Linear Matching Method to take into account material softening. The technique has two major steps: reduction of the total potential energy to obtain the solution of a linear problem and scaling of the resulting mechanism of deformation to maximize the load. Two procedures are evaluated for the second of these steps; a direct approach which simply examines how the solution evolves along a radial path in degree of freedom space, and an incremental method which takes into account how the solution might evolve along paths away from this radial line. It is demonstrated that the incremental approach is more robust and provides stable solutions for high and low levels of softening, but numerical instabilities in the procedure can occur for intermediate degrees of softening.