Contribution of the surface dipole moment and the contact potential-induced disjoining pressure to the stress balance at a three-phase contact

The contact between three insulators results in a set up of contact potentials related to the adsorbed dipole moment at each surface. The produced electric field applies force (disjoining pressure) on each interface. This disjoining pressure is a long-ranged force (1/distance²) which is proportional to the difference between the dielectric permittivities of the phases on the two sides of the interface and, for small angles, to the square of the contact angle. The contact potential leads to a logarithmic perturbation of the profile of the three-phase contact zone.     

Gas mixture flow in nanoporous media in the presence of surface forces. The dusty-gas model

The dusty-gas model has been generalized to the case of gas mixture flow in nanoporous media under the conditions of the action of surface forces. A basic set of transport equations has been derived proceeding from kinetic equations for a gas mixture and dust particles. To take into account the surface forces, the interaction between a gas and dust particles has been represented as a sum of a long-range potential, which reflects the surface forces, and a short-range potential, which describes gas molecule scattering on the surface of pore walls. The contribution of the long-range component has been taken into account in the self-consistent approximation, while the short-range component has been considered in the standard manner. The surface forces have been shown to have a substantial effect on the transfer of mixed gases through porous bodies; in particular, it becomes possible to separate mixture components due to different potentials of the interaction of their molecules with pore surface.     

Determination of the surface area of loose metal deposits by impedance spectroscopy

The surface area and fractal dimensions of the surface of loose copper and zinc deposits obtained within 30 and 300 s at direct current sixfold exceeding limiting diffusion current on a smooth electrode were in situ determined by impedance spectroscopy. Impedance measurements were performed in 0.5 M Na₂SO₄ solution. A constant phase element taking into account the distribution of double-layer capacitance over the fractal surface of the electrode was used in the equivalent impedance scheme. Specific surface calculated with regard to the weight of the released metal slightly varied within 300 s (from 6.16 to 6.55 and from 7.12 to 5.89 m²/g for copper and zinc deposits, respectively). Fractal dimensions estimated by chronopotentiometry were given for comparison. Fractal dimensions found by two methods for loose copper and zinc deposits agree with each other; their values (2.19–2.75) testify that the surface of the deposits densely fills the space.     

Determination of explosive vapor concentrations with remote sampling in the control of objects

A procedure is proposed for the determination of the vapor concentration of 2,4,6-trinitrotoluene (TNT) in air at a level of 10^–16 g/cm³ in the control of objects for the presence of TNT. The procedure includes preconcentration of TNT vapors and gas chromatographic determination with a limit of TNT detection at a level of 0.08 ± 0.02 pg in a sample. The procedure was applied to the control objects in cells of typical automatic luggage locker with sampling through sampling air ducts. A measure of sample losses as the breakthrough of vapors through sampling air ducts and gas dynamic conditions for the reduction of vapor losses as the ratio of diffusion coefficient to the air duct flow rate were proposed. The time constant of the saturation of the sampling system with TNT vapors and the time constant of its cleaning were determined. It was shown that TNT vapors can be detected virtually satisfactorily near TNT-containing objects with sampling through long channels.     

Primary photophysical and photochemical processes for Pt(SCN)<Subscript>6</Subscript><Superscript>2–</Superscript> complex

Photosolvation of a Pt^IV hexathiocyanate complex Pt(SCN)₆ ^2– in water and ethanol was studied by steady-state photolysis, nanosecond laser flash photolysis, and ultrafast kinetic spectroscopy. Complexes Pt(SCN)₅(H₂O)^– and Pt(SCN)₅(C₂H₅OH)^– were found to be the only reaction products. The quantum yields of photosolvation are independent of the excitation wavelength, being equal to 0.25 and 0.5 for the solutions of the complex in water and ethanol, respectively. Photosolvation proceeds by the mechanism of heterolytic metal—ligand bond dissociation without involvement of redox processes. The characteristic time of formation of the end products for both solvents is about 10 ps. Three successive intermediates detected on the picosecond time scale were interpreted as Pt^IV complexes. The nature of the intermediates and possible mechanisms of photosolvation are discussed.     

Alkylation of phenol with olefins in the presence of catalysts based on mesoporous aromatic frameworks

Mesoporous polyaromatic frameworks (PAFs) based on tetraphenylmethane were obtained and modified with sulfonic acid groups. The compounds were characterized by solid-state ¹³C NMR and IR spectroscopy, low-temperature nitrogen adsorption-desorption, and transmission electron microscopy. The acidities of the PAF-1-SO₃H and PAF-2-SO₃H samples determined by titration were 3.99 mmol g^–1 and 0.91 mmol g^–1, respectively. The catalytic activity of PAF-SO₃H for alkylation of phenol with linear terminal olefins was investigated. The reaction products were isomeric monoalkylphenols (C-alkylates), and alkyl phenyl ethers (O-alkylates).     

A comparative study of the reactions of fluorinated oxi- and thiiranes with acyl chlorides

The CoCl₂-catalyzed reactions of fluorinated 1,2-oxi- and thiiranes with acyl chlorides were studied. It was found that a regioselective heterocycle opening reaction resulted in two isomers having normal and abnormal structure in a ratio predetermined by the substituents in both the starting heterocycles and acyl chlorides.     

<Emphasis Type="Italic">N</Emphasis>-Allyl-substituted aminomethylene-1,1-bisphosphonates in 1,3-dipolar cycloaddition reaction with aromatic nitrile <Emphasis Type="Italic">N</Emphasis>-oxides

A reaction of N-allyl-substituted aminomethylene-1,1-bisphosphonates with aromatic nitrile N-oxides was used to obtain new aminomethylenebisphosphonates with one or two 3-arylisoxazoline rings at the nitrogen atom. NMR spectroscopy studies showed that the bisphosphonates with two isoxazoline fragments in the molecule exist in solution as a mixture of two diastereomers.     

Heterocyclization of carboxy- and sulfonamides in the course of oxidative addition to unsaturated substrates

Formation of heterocyclic compounds in the course of oxidative addition of carboxamides and sulfonamides to alkenes and dienes is reviewed. Main attention is focused on reactions proceeding in the presence of halo-containing oxidative systems and reagents. Features of behavior of fluorine-substituted sulfonamides and carboxamides are discussed.     

Polyethylenimine and tris(2-aminoethyl)amine modified p(GA–EGMA) microbeads for sorption of uranium ions: equilibrium,kinetic and thermodynamic studies

Poly(glycidyl methacrylate-ethyleneglycol dimethacrylate), p(GA–EGMA), microbeads were prepared through suspension polymerization. It was decorated with polyethylene imine (PEIM) and tris(2-aminoethyl)amine (TAEA) ligands to decorate with polyamine groups. These microbeads were used for sorption of uranium ions from aqueous solution. The maximum sorption of uranium ions on the PEIM and TAEA modified microbeads was observed at pH 6.0. The maximum sorption capacity of acid hydrolyzed p(GA–EGMA)–OH, p(GA–EGMA)–PEIM and p(GA–EGMA)–TAEA microbeads was found to be 7.21, 87.8 and 64.3 mg g^?1. The sorption process conforms to the pseudo-second order kinetic model and the Langmuir and Temkin isotherm models well.