Electric power switches

A review is given of the physics and engineering behavior of arcs in vacuum and axial gas blast under the conditions found in high-voltage circuit breakers. The topics included are: the zero energy switch; current limiting switches; arc control; the gas-blast circuit breakers; the low-current gas-blast arc; arcing with ablation; interruption dynamics; arc modeling; vacuum as a switching element; the vacuum arc; the constricted arc; and the properties of SF₆     

An Integer Goal Programming Model for Determining Military Aircraft Expenditures

The decision-making process involved in the procurement of military weapon systems, although quite critical and complex, still encompasses the basic characteristics of a capital budgeting problem. Given a number of expenditure items and a limited budget, it is desired to procure those weapon systems that will achieve the goals and objectives of the government and/or military in the most efficient manner. Since these objectives are typically numerous and diverse, traditional decision-making techniques are not applicable. As such, integer goal programming is suggested as a technique to be employed to determine the number of military aircraft to be procured, given conflicting expenditure, budget and effectiveness goals. This method is demonstrated via a case example in which the solution results are presented.     

EVIDENCE FOR HIGH ENERGY STORAGE INTERMEDIATES IN BIOLUMINESCENCE

Abstract— The bioluminescent enzyme from Photobacterium fischeri is normally activated in vifro by reaction with FMNH₂ and O₂. in the presence of a long-chain aldehyde. Emission from enzyme intermediates in this reaction continues for several seconds, and if the mixture is frozen just after initiation of the reaction, this presumptive emission may be delayed until the system is warmed again. Light is then emitted in a fashion analogous to thermo-luminescent emission, with a maximum intensity at — 10°C. The experiments described here show that the total amount of light which is emitted under these conditions no longer depends so much upon aldehyde, a relatively high quantum yield being obtained both with and without aldehyde.
It is further shown that bioluminescence may be activated by light, populating it is believed, the same state which is responsible for the emission in the case of the FMNH₂-induced emission. The light-induced reaction does not depend on flavin in the enzyme preparations, nor does the activation spectrum resemble that of a flavoprotein. Activation may be carried out in the solid state at temperatures down to at least — 100°C, and so does not involve the diffusion of large molecules. It is proposed that energy storage takes place by charge separation, and that the excited state from which emission takes place is associated with charge recombination.     

Ultrasonic sensor to measure the density of a liquid or slurry during pipeline transport

This paper describes the design and testing of a computer-controlled sensor for the real-time measurement of the density of a liquid or slurry. It is to be deployed at the US Department of Energy's Hanford Site in Richland, WA, to monitor slurry properties during radioactive waste transfers. To demonstrate the sensor performance, tests were carried out using non-radioactive waste simulants and the results will be presented. The sensor is mounted flush with the pipeline wall in a nominal 5-cm (2-in.) pipe spool piece. The design pressure is 2.8 MPa (400 psi). The probe wedge in contact with the slurry was selected to operate up to pH 14, and the probe components were radiation tested at exposures of 1 x 10(6) R. The sensor is applicable for process control of all types of liquids or slurries in pipelines or in vessels.     

Aggregation of nanosized colloidal silica in the presence of various alkali cations investigated by the electrospray technique

The slow aggregation process of a concentrated silica dispersion (Bindzil 40/220) in the presence of alkali chlorides (LiCl, NaCl, KCl, RbCl, and CsCl) was investigated by means of mobility measurements. At intervals during the aggregation, particles and aggregates were transferred from the liquid phase to the gas phase via electrospray (ES) and subsequently size selected and counted using a scanning mobility particle sizer (SMPS). This method enables the acquisition of particle and aggregate size distributions with a time resolution of minutes. To our knowledge, this is the first time that the method has been applied to study the process of colloidal aggregation. The obtained results indicate that, independent of the type of counterion, a sufficient dilution of the formed gel will cause the particles to redisperse. Hence, the silica particles are, at least initially, reversibly aggregated. The reversibility of the aggregation indicates additional non-DLVO repulsive steric interactions that are likely due to the presence of a gel layer at the surface. The size of the disintegrating aggregates was monitored as a function of the time after dilution. It was found that the most stable aggregates were formed by the ions that adsorb most strongly on the particle surface. This attractive effect was ascribed to an ion-ion correlation interaction.     

The 99Ru Mössbauer spectrum of β-RuCl3

The ⁹⁹Ru nuclear quadrupole interaction in β-RuCl₃ can be related to the large trigonal distortion at the ruthenium site. The ratio of the quadrupole moments has been determined to be Q_e/Q_g = +3.06 ± 0.10, and it is confirmed that Q_c and Q_g are both positive.     

Effect of Low Temperature Air Plasma Treatment on Wetting and Flow Properties of Kaolinite Powders

It was found in this study that the air plasma treatment of particular kaolinite has led to the change of its wettability, which was reflected in the decreased values of water contact angles of wetting from 88.7° for virgin kaolinite to 86.3° for 30?min air plasma treated one. Plasma treated samples show higher average surface energies in the wide range of coverage regimes in comparison to the virgin samples as determined by inverse gas chromatography. Results of these measurements confirmed our assumption, that air plasma treatment activates surface energy of the crystal planes of the kaolinite as reflected in the broadened dispersive surface energy distribution after 10?min treatment time. However with prolonged 30?min treatment time the dispersive surface energy distribution profile was decreased. We assume, that the latter decrease reflects the distorsion of the crystal lattice of the kaolinite as confirmed by FTIR analysis as reflected in changes of Si?CO?CSi and Al₂O?CH characteristic absorption bands. Calculated dispersive surface free energy for 24?% surface coverage was increased from original 35?mJ/m² to 40.3 and 40.8?mJ/m² for 10 and 30?min treatment times. There were determined yield locus and flow function dependencies at different stress levels for virgin and different time plasma treated samples (flow index??ff _c , effective angle of internal friction???? _e , unconfined yield strength???? _c ). It was found that by plasma treatment the character of the flow was shifting from region of very cohesive (ff _c ?=?2.39) to the cohesive (ff _c ?=?3.19). For untreated samples effective angle of internal friction was decreased with increasing applied consolidation stress, while for plasma treated kaolinite it was increased.