Synthesis and reactions of allenic amides : Allenes-XXXI

Allenic amides are prepared from allenic nitriles using alkaline hydrogen peroxide and by a Ritter reaction with t-butyl alcohol, when N-t-butylamides are obtained. Strong nucleophiles attack the central carbon of the allene system to give α,β-unsaturated addition products.     

23Na, 29Si, and 13C MAS NMR investigation of glass-forming reactions between Na2CO3 and SiO2

The glass-forming reactions between sodium carbonate (Na2CO3) and silica (SiO2) have been investigated by 23Na, 29Si, and 13C magic-angle spinning (MAS) NMR spectroscopy. The multinuclear MAS NMR approach identifies and quantifies reaction products and intermediates, both glassy and crystalline. A series of powdered batches of initial composition Na2CO3.xSiO2 (x = 1, 2) corresponding to a sodium metasilicate (Na2SiO3) and sodium disilicate (Na2Si2O5) stoichiometry were investigated after periods of isothermal and nonisothermal heat treatments at different temperatures. Analysis of the 23Na quadrupolar coupling parameters has identified the early reaction product in all cases as crystalline Na2SiO3. In the nonisothermal experiment, this reaction is preceded by an early silica-rich melt phase formed around 850 degrees C. The early reactions are controlled by solid-state Na+ diffusion across the reaction zone in the grain interface layer. Crystalline Na2SiO3 precipitates in the interface layer, increasing its thickness between the Na2CO3 and the SiO2 grains and slowing down the rate of Na+ migration. This creates a secondary phase, which is temperature dependent. At low temperatures, where Na+ migration is impaired, the production of Na2SiO3 ceases and silica-richer phases are precipitated. In the case of the sodium disilicate batch, where excess SiO2 is present, a secondary reaction of Na2SiO3 with SiO2 forming a glassy phase is observed. A transient carbon-bearing phase has been identified by 13C NMR as a NaCO3- complex loosely bound to bridging oxygens in the silicate network at the SiO2 grain surface.     

New metallodendrimers containing an octakis(diphenylphosphino)-functionalized silsesquioxane core and ruthenium(II)-based chromophores

A new class of surface-modified dendrimers has been prepared by reactions of 8 equiv of the terpyridine-functionalized polyether monodendrons with a polyhedral oligomeric silsesquioxane (POSS) core. Subsequent reactions of these spherically shaped organic dendrimers with Ru(II)-based precursors afford photo- and redox-active metallodendrimers. These new dendrimers have been characterized using a combination of mass spectral analysis (MALDI-TOF/MS, ESI/MS, and FAB/MS), nuclear magnetic resonance (1H, 13C, 29Si, and 31P(1H) NMR), photophysical analyses (electronic absorption, emission, excited-state lifetime, and quantum yield) and electrochemical measurement (cyclic voltammetry). Specifically, 31P(1H) NMR is used to monitor the completion of reactions and the purity of dendrimers and metallodendrimers. These new metallodendrimers exhibit large extinction coefficients that coincide with the number of peripheral Ru(II)-based chromophores. With the use of (-CH2-Ph-tpy)RuII(bpy)2 type of chromophores, all metallodendrimers are found emissive at room temperature, with lifetimes in the range of 605-890 ns. Photophysical data also indicate similar steady-state emission maxima and single-exponential decay kinetics for all metallodendrimers, and the observed overall quantum yields of the G1, G2, and G3 metallodendrimers are found to be 14, 20, and 7 times higher than that of the monomeric model complex (CH3-Ph-tpy)Ru(bpy)2(PF6)2. Electrochemical studies reveal the presence of surface-confined species, in addition to the ligand-centered and metal-centered redox processes.     

Electrocatalytic reductions of nitrite, nitric oxide, and nitrous oxide by thermophilic cytochrome P450 CYP119 in film-modified electrodes and an analytical comparison of its catalytic activities with myoglobin

Previous investigations of nitrite and nitric oxide reduction by myoglobin in surfactant film modified electrodes characterized several distinct steps in the denitrification pathway, including isolation of a nitroxyl adduct similar to that proposed in the P450nor catalytic cycle. To investigate the effect of the axial ligand on these biomimetic reductions, we report here a comparison of the electrocatalytic activity of myoglobin (Mb) with a thermophilic cytochrome P450 CYP119. Electrocatalytic nitrite reduction by CYP119 is very similar to that by Mb: two catalytic waves at analogous potentials are observed, the first corresponding to the reduction of nitric oxide, the second to the production of ammonia. CYP119 is a much more selective catalyst, giving almost exclusively ammonia during the initial half-hour of reductive electrolysis of nitrite. More careful investigations of specific steps in the catalytic cycle show comparable rates of nitrite dehydration and almost identical potentials and lifetimes for ferrous nitroxyl intermediate (Fe(II)-NO(-)) in CYP119 and Mb. The catalytic efficiency of nitric oxide reduction is reduced for CYP119 as compared to Mb, attributable to both a lower affinity of the protein for NO and a decreased rate of N-N coupling. Isotopic labeling studies show ammonia incorporation into nitrous oxide produced during nitrite reduction, as has been termed co-denitrification for certain bacterial and fungal nitrite reductases. Mb has a much higher co-denitrification activity than CYP119. Conversely, CYP119 is shown to be slightly more efficient at the two-electron reduction of N(2)O to N(2). These results suggest that thiolate ligation does not significantly alter the catalytic reactivity, but the dramatic difference in product distribution may suggest an important role for protein stability in the selectivity of biocatalysts.     

Total reflection X-ray fluorescence analysis of Mongolian coals

Coal samples were analysed for trace elements using total reflection X-ray fluorescence with monochromatic excitation. The procedure involved direct irradiation of the sample with the incoherent peak as internal standard. A new method for spectrometer sensitivity determination and sample quantification, was evaluated. Variable amounts of several trace elements were obtained in the analysis of coal from eight different deposits of Mongolia. The accuracy of the procedure was verified with the analysis of a coal standard.     

Synthesis, screening, and sequencing of cysteine-rich one-bead one-compound peptide libraries

Cysteine-rich peptides are valued as tags for biarsenical fluorophores and as environmentally important reagents for binding toxic heavy metals. Due to the inherent difficulties created by cysteine, the power of one-bead one-compound (OBOC) libraries has never been applied to the discovery of short cysteine-rich peptides. We have developed the first method for the synthesis, screening, and sequencing of cysteine-rich OBOC peptide libraries. First, we synthesized a heavily biased cysteine-rich OBOC library, incorporating 50% cysteine at each position (Ac-X8-KM-TentaGel). Then, we developed conditions for cysteine alkylation, cyanogen bromide cleavage, and direct MS/MS sequencing of that library at the single bead level. The sequencing efficiency of this library was comparable to a traditional cysteine-free library. To validate screening of cysteine-rich OBOC libraries, we reacted a library with the biarsenical FlAsH and identified beads bearing the known biarsenical-binding motif (CCXXCC). These results enable OBOC libraries to be used in high-throughput discovery of cysteine-rich peptides for protein tagging, environmental remediation of metal contaminants, or cysteine-rich pharmaceuticals.     

Ionic liquids as amphiphile self-assembly media

In recent years, the number of non-aqueous solvents which mediate hydrocarbon-solvent interactions and promote the self-assembly of amphiphiles has been markedly increased by the reporting of over 30 ionic liquids which possess this previously unusual solvent characteristic. This new situation allows a different exploration of the molecular "solvophobic effect" and tests the current understanding of amphiphile self-assembly. Interestingly, both protic and aprotic ionic liquids support amphiphile self-assembly, indicating that it is not required for the solvents to be able to form a hydrogen bonded network. Here, the use of ionic liquids as amphiphile self-assembly media is reviewed, including micelle and liquid crystalline mesophase formation, their use as a solvent phase in microemulsions and emulsions, and the emerging field of nanostructured inorganic materials synthesis. Surfactants, lipids and block co-polymers are the focus amphiphile classes in this critical review (174 references).     

Experiments with a high-density positronium gas

We have created a high-density gas of interacting positronium (Ps) atoms by irradiating a thin film of nanoporous silica with intense positron bursts and measured the Ps lifetime using a new single-shot technique. When the positrons were compressed to 3.3 x 10(10) cm-2, the apparent intensity of the orthopositronium lifetime component was found to decrease by 33%. We believe this is due to a combination of spin exchange quenching and PS2 molecule formation associated with colliding pairs of oppositely polarized triplet positronium atoms. Our data imply an effective cross section for this process of 2.9 x 10(-14) cm-2.     

Structure in rare earth doped β″-alumina

Abstract

Preliminary results of a combined EXAFS and computer simulation study of rare-earth doped β″-alumina are presented.