Sulfur-linked cyanobiphenyl-based liquid crystal dimers and the twist-bend nematic phase

ABSTRACT

The synthesis and characterisation of two series of cyanobiphenyl-based liquid crystal dimers containing sulfur links between the spacer and mesogenic units, the 4?-[1,ω-alkanediylbis(thio)]bis-[1,1?-biphenyl]-4-carbonitriles (CBSnSCB), and 4?-({ω-[(4?-cyano[1,1?-biphenyl]-4-yl)oxy]alkyl}thio)[1,1?-biphenyl]-4-carbonitriles (CBSnOCB) are described. The odd members of both series show twist-bend nematic and nematic phases, whereas the even members exhibit only the nematic phase. An analogous cyanoterphenyl-based dimer, 3⁴-{6-[(4?-cyano[1,1?-biphenyl]-4-yl)thio]-hexyl}[1¹,2¹:2⁴,3¹-terphenyl]-1⁴-carbonitrile (CT6SCB), is also reported and shows enantiotropic N_TB and N phases. The transitional properties of these dimers are discussed in terms of molecular curvature, flexibility and biaxiality. The same molecular factors also influence the birefringence of nematic phases. Resonant X-ray scattering studies of the twist-bend nematic phase at both the carbon and sulfur absorption edges were performed, which allowed for the determination of critical behaviour of the helical pitch at the transition to the nematic phase, the behaviour was found to be independent of molecular structure. It was also observed that despite the different molecular bending angle and flexibility, in all compounds the helical pitch length far from the N-N_TB transition corresponds to 4 longitudinal molecular distances.     

Theoretical Insights into the Nature of Halogen Bonding in Prereactive Complexes

Benchmark quality geometries and interaction energies for the prereactive halogen‐bonded complexes of dihalogens and ammonia, including hypothetical astatine containing dihalogens, have been produced via explicitly correlated coupled cluster methods. The application of local electron correlation partitioning reveals dispersion, electrostatics and ionic substitutions all contribute significantly to the interaction energy, with a linear relationship between the ionic substitutions and the degree of charge transfer. Potential energy curves for H₃N???ClF show that as the relative orientations of the two subunits are manipulated appreciable interactions can be found at considerably angular displaced geometries, signifying lower directionality in halogen bonding than previously supposed.     

Convenient syntheses of ring-B-nor analogues of Ambrox® and amberketal via a novel ring contraction reaction

Manool is converted into ring-B-nor analogues of commercially important perfumery compounds via a novel ring-B-nor intermediate methylene ketone 9. Compound 9 is synthesised via the formation of an exocyclic bromonium ion and the concomitant ring contraction of the B-ring of a diterpene skeleton derived from manool. Oxidation and base treatment of the ring-contracted product result in dehydrohalogenation and decarboxylation to afford methylene ketone compound 9, which is then converted to ring-B-nor analogues of Ambrox® and amberketal.     

Pursuing structure in microcrystalline solids with independent molecules in the unit cell using 1H-13C correlation data

The (1)H-(13)C solid-state NMR heteronuclear correlation (HETCOR) experiment is demonstrated to provide shift assignments in certain powders that have two or more structurally independent molecules in the unit cell (i.e. multiple molecules per asymmetric unit). Although this class of solids is often difficult to characterize using other methods, HETCOR provides both the conventional assignment of shifts to molecular positions and associates many resonances with specific molecules in the asymmetric unit. Such assignments facilitate conformational characterization of the individual molecules of the asymmetric unit and the first such characterization solely from solid-state NMR data is described. HETCOR offers advantages in sensitivity over prior methods that assign resonances in the asymmetric unit by (13)C-(13)C correlations and therefore allows shorter average analysis times in natural abundance materials. The (1)H-(13)C analysis is demonstrated first on materials with known shift assignments from INADEQUATE data (santonin and Ca(OAc)(2) phase I) to verify the technique and subsequently is extended to a pair of unknown solids: (+)-catechin and Ca(OAc)(2) phase II. Sufficient sensitivity and resolution is achieved in the spectra to provide assignments to one of the specific molecules of the asymmetric unit at over 54% of the sites.     

Single Chlamydomonas reinhardtii cell separation from bacterial cells and auto-fluorescence tracking with a nanosieve device

A planar, transparent, and adaptable nanosieve device is developed for efficient microalgae/bacteria separation. In the proposed method, a sacrificial layer is applied with dual photolithography patterning to achieve a 1D channel with a very low aspect ratio (1:10 000). A microalgae/bacteria mixture is then introduced into the deformable PDMS nanochannel. The hydrodynamic deformation of the nanochannel is regulated to allow the bacteria cells to pass through while leaving the microalgae cells trapped in the device. At a flow rate of 4 μL/min, the supernatant collected from the device is indistinguishable from a control solution, indicating that nearly all the microalgae cells are trapped in the device. Additionally, this device is capable of single cell auto-fluorescence tracking. These microalgae cells demonstrate minimal photobleaching over 250 s laser exposure and could be used to monitor hazardous compounds in the sample with a continuous flow. This method will be valuable to purify microalgae samples containing contaminations and study single-cell heterogeneity.     

The controlled flocculation of submicron emulsion particles. I. A three-step synthetic route to supermicron polymer particles

The basic features of a three-step experimental process to produce supermicron polymer particles are described. First, a submicron emulsifier-free latex is prepared by a well-known technique. Second, the latex is aggregated by destabilizing with cetyl pyridinium chloride under constant stirring conditions, to yield roughly spherical clusters of 6-12 μ diameter. Third, the aggregates are stabilized with poly(vinyl alcohol) and internally coalesced by heating at or above the glass transition temperature. The final product particles have relatively smooth surfaces. Results are qualitatively interpreted in terms of a dynamic equilibrium where the aggregate size is determined by a balance between attractive interparticle potentials and stirring shear forces. Bimodal aggregate size distributions suggest the aggregate break-up mechanism may involve the erosion of individual latex particles and small fragments from the surface of aggregates. © 1996 John Wiley & Sons, Inc.     

Synthesis of mesocyclic and macrocyclic polythioethers using the cesium dithiolate technique

The mesocyclic trithioethers, 1,4,7-trithiacyclodecane, 1,4,7-trithiacycloundecane, 1,4,8-trithiacycloundecane, and 1,5,9-trithiacyclododecane; the mesocyclic trithioether ketones, 1,4,7-trithiacyclodecan-9-one; 1,4,8-trithiacycloundecan-6-one, and 1,5,9-trithiacyclododecan-3-one; and the mesocyclic trithioether alcohols, 1,4,7-trithiacyclodecan-9-ol, 1,4,8-trithiacycloundecan-6-ol, and 1,5,9-trithiacyclododecan-3-ol, have been synthesized using the cesium dithiolate technique. In some cases, the corresponding macrocyclic hexathioether was isolated from the reaction mixture in addition to the mesocyclic trithioether; 1,4,7,11,14,17-hexathiacycloeicosane, 1,4,7,11,14,17-hexathiacycloeicosan-9,19-dione, 1,4,7,12,15,18-hexathiacyclodocosane, and 1,5,9,13,17,21-hexathiacyclotetracosane. Single-crystal X-ray structures have been determined for 1,5,9-trithiacyclododecan-3-ol and 1,4,7,12,15,18-hexathiacyclodocosane. For 1,5,9-trithiacyclododecane-3-ol, the compound crystallizes in the monoclinic space group, C2/c, with a = 10.5926( 9 ) Å, b = 15.582(2) Å, c = 13.6015(8) Å, β = 98.186(6)⁰, Z = 8, and R = 0.038. The macrocycle, 1,4,7,12,15,18-hexathiacyclodocosane, crystallizes in the orthorhombic space group, Pbca, with a = 21.406(5) Å, b = 9.810(2) Å, c = 10.225(2) Å, Z = 4, and R = 0.020.     

Boron Subphthalocyanines and Silicon Phthalocyanines for Use as Active Materials in Organic Photovoltaics

Organic photovoltaics (OPVs) have experienced continued interest over the last 25 years as a viable technology for the generation of power. Phthalocyanines are among the oldest commercial dyes and have been utilized in some of the earliest examples of OPVs. In recent years, the use of boron subphthalocyanines (BsubPcs) and silicon phthalocyanines (SiPcs) has attracted a flurry of interest with some examples of fullerene‐free devices reaching power conversion efficiencies >8 %. Unlike other more common divalent phthalocyanines such as copper or zinc, BsubPcs and SiPcs contain additional axial groups that can easily be functionalized without significantly affecting the optoelectronic properties of the macrocycle. This handle facilitates our ability to tune the solid‐state arrangement and other physical characteristics such as solubility ultimately giving us the ability to improve the thin film processing and final device performance. This review covers recent studies on the development of BsubPcs and SiPcs for use as active materials in organic photovoltaics.