Hyper-Rayleigh scattering as a means of monitoring crystal nucleation in solution

Hyper-Rayleigh scattering is revealed as a very sensitive monitor of cluster formation in solution, and as a means of studying the mechanism of crystal nucleation in molecular species. Two compounds are selected with particularly high second harmonic generation (SHG) powers in the crystalline state and experimental conditions are defined allowing the measurement of the beta value for one of these as 18+/-1x10(-30) esu. It is found to agree with current theoretical prediction of 20x10(-30) esu. In the more powerful of these, two photon induced fluorescence is found to be partly responsible for the SHG. The solubilities of both compounds in methanol are measured and it is observed that these differ by a factor of ten. When the solution concentration is increased beyond 45% of the saturation value, the quadratic coefficient exhibits non-linear behaviour with respect to concentration. Additionally, the widths of the distributions of the HRS signals increase initially with concentration as expected, but, beyond 45% saturation concentrations, these narrow again. These phenomena are interpreted as indicators of cluster formation in these solutions well below saturation concentrations. A future experimental design is proposed in which the coherent component will yield information on the organisation of the molecules in such clusters.     

Synthesis of high surface area Al-containing mesoporous silica from calcined and acid leached kaolinites as the precursors

Al-containing mesoporous silicas were synthesized by hydrothermal treatment of microporous silica prepared by selectively acid leached metakaolinites with Si/Al = 3.9-92.5 mixed with a surfactant of cetyltrimethylammonium bromide (CTABr). The specific surface area of the products increased with higher surfactant/microporous silica (surf/Si) ratio and Si/Al ratio of the microporous silica, reaching about 1400 m2/g at CTABr/Si 0.1 and Si/Al 40. The XRD patterns of these products show a hexagonal (100) peak with the lattice parameter a0=4.2-4.3 nm and the N2 adsorption isotherms show steep increase of adsorption between relative pressure of 0.3 and 0.4. Hexagonal mesoporous microstructure is observed by high resolution TEM. The pore size distributions of the products show a sharp peak at 2.8 nm by the BJH method. The high specific surface area of the present mesoporous samples is attributed to the lower matrix density and surface roughness of mesopore wall. The highest specific surface area of the products reached up to 1420 m2/g and this value is apparently higher than those reported in hexagonal mesoporous silicas. A unique microporous structure of the starting material is thought to be related to achieve such a high specific surface area of the products.     

Long-external-cavity distributed Bragg reflector laser with subkilohertz intrinsic linewidth

We report on a simple, compact, and robust 780 nm distributed Bragg reflector laser with subkilohertz intrinsic linewidth. An external cavity with optical path length of 3.6 m, implemented with an optical fiber, reduces the laser frequency noise by several orders of magnitude. At frequencies above 100 kHz the frequency noise spectral density is reduced by over 33 dB, resulting in an intrinsic Lorentzian linewidth of 300 Hz. The remaining low-frequency noise is easily removed by stabilization to an external reference cavity. We further characterize the influence of feedback power and current variation on the intrinsic linewidth. The system is suitable for experiments requiring a tunable laser with narrow linewidth and low high-frequency noise, such as coherent optical communication, optical clocks, and cavity QED experiments.     

Mechanical properties of ormosils

Many organically modified silicates (ormosils) can be prepared by the sol-gel method with very different mechanical properties by varying the ratio of polydimethylsiloxane (PDMS) to tetraethoxysilane (TEOS) contents and processing conditions. With a low PDMS concentration, the ormosils are harder, stiffer and stronger than those with higher concentration of PDMS. Even harder ormosils are possible when ultrasonic irradiation is used during synthesis. As the PDMS concentration is increased, the ormosils take on a more flexible nature, and over a critical concentration actually become rubbery. These new rubbery materials can contain as much as 75% inorganic components, and have more stable mechanical properties than commercial rubbers at elevated temperatures. Effects of PDMS addition to the network structure and mechanical properties of the ormosils were investigated.     

Influence of drawing temperature on the strength of fluoride glass fibers

The tensile strength of fluorozirconate glass fibers was measured as a function of fiber drawing temperature, and strengths ranging from 60–220 MPa were observed. Statistical analysis of the strength data points to a bimodal behavior in the fibers drawn at high temperatures, while the mode of fracture is essentially unimodal for fibers drawn at lower temperatures. SEM examination of the fibers drawn at high temperatures revealed the presence of crystals in the fibers, and these crystals were associated with flaws which gave rise to the observed low strength distribution.