Energy dependence of SF6 dissociation by pulsed CO2 laser radiation

The fractional dissociation,³²Γ, of ³²SF₆ by the output of a pulsed TEA CO₂ laser has been found to depend upon Φ, the total integrated laser intensity, as ³²Γ ∞ Φ^m for both the P(20) and P(16) laser lines, where m ≈ 3 in the range 2 < Φ < 7.2 J/cm² and increases from 3 to ≈ 4 as Φ is reduced from 2 to 0.9 J/cm².     

Mediated amperometric biosensors for d-galactose,glycolate and l-amino acids based on a ferrocene-modified carbon paste electrode

Direct-current cyclic voltammetry is used to investigate the suitability of a ferrocene derivative as a mediator with galactose, glycolate and l-amino acid oxidases. The three enzymes coupled catalytically to ferrocene monocarboxylic acid exhibiting homogeneous second-order rate constants in the range 0.4 × 10⁵ to 8.5 × 10⁵ l mol^?1 s^?1. Enzyme electrodes which responded to d-galactose, glycolate or l-amino acids were constructed. The appropriate oxidase was retained behind a dialysis membrane at a carbon paste electrode containing the poorly soluble derivative 1,1′-dimethylferrocene. All the electrodes responded rapidly to millimolar concentrations of their respective substrates producing 95% of the steady-state current response in <2 min. This general method of biosensor construction should be widely applicable to oxidases and other oxidoreductase enzymes.     

Phenotyping apolipoprotein E*3-leiden transgenic mice by two-dimensional polyacrylamide gel electrophoresis and mass spectrometric identification

Apolipoprotein E (ApoE) plays an important role in cholesterol and triglyceride metabolism, being one of the major structural components of chylomicrons and very low density lipoprotein (VLDL) remnants. ApoE functions as a ligand in the receptor-mediated uptake of these remnants from the blood by the liver. A variant form of ApoE, apolipoprotein E*3-Leiden, shows reduced affinity for the low density lipoprotein (LDL) receptor, and results in the dominant expression of type III hyperlipoproteinemia. Two-dimensional electrophoresis (2-DE) has been used to characterise protein expression in serum samples from control and transgenic mice expressing the human ApoE*3-Leiden mutation, fed a cholesterol-rich diet, and transgenic mice fed a normal diet. For the identification of proteins, single silver-stained spots were excised from the 2-DE gels and subjected to in-gel enzymatic digestion. Extracted peptides were analysed by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS). This proteomic approach has enabled the ApoE*3-Leiden variant to be positioned in a 2-DE separation of serum proteins, and has identified changes in the expression of haptoglobin, indicating that this protein may provide a marker for the potential onset of atherosclerosis.     

Catalysts for the determination of oxygen in organic compounds

Summary Thermal decomposition of metal-organic complexes of nickel, cobalt and iron has given catalysts which are very effective at about 900° for the conversion of carbon dioxide, water and other oxygencontaining sample decomposition products to carbon monoxide in the direct determination of oxygen in organic compounds when using a modified Unterzaucher type apparatus. A copper catalyst similarly prepared required a temperature of 1030° whereas a manganese complex decomposition product was ineffective.

---

Katalysatoren zur Sauerstoffbestimmung in organischen Substanzen

Zusammenfassung Durch thermische Zersetzung metallorganischer Komplexe von Ni, Co und Fe erhält man Katalysatoren, die die Umwandlung von CO₂, H₂O und anderen sauerstoffhältigen Zerfallsprodukten zu CO bei etwa 900° C bei der direkten Sauerstoffbestimmung in einer modifizierten Unterzaucher-Apparatur sehr wirksam fördern. Ein ähnlich hergestellter Cu-Katalysator erfordert 1030° C und das Zersetzungsprodukt eines Mn-Komplexes ist unwirksam.

     

Assessment of silver and gold substrates for the detection of amphetamine sulfate by surface enhanced Raman scattering (SERS)

Methods of detection of amphetamine sulfate using surface enhanced Raman scattering (SERS) from colloidal suspensions and vapour deposited films of both silver and gold are compared. Different aggregating agents are required to produce effective SERS from silver and gold colloidal suspensions. Gold colloid and vapour deposited gold films give weaker scattering than the equivalent silver substrates when high concentrations of drug are analysed but they also give lower detection limits, suggesting a smaller surface enhancement but stronger surface adsorption. A 10(-5) mol dm(-3) solution (the final concentration after addition of colloid was 10(-6) mol dm(-3)) of amphetamine sulfate was detected from gold colloid with an RSD of 5.4%. 25 microl of the same solution could be detected on a roughened gold film. The intensities of the spectra varied across the film surface resulting in relatively high RSDs. The precision was improved by averaging the scattering from several points on the surface. An attempt to improve the detection limit and precision by concentrating a suspension of gold colloid and amphetamine sulfate in aluminium wells did not give effective quantitation. Thus, positive identification and semi-quantitative estimation of amphetamine sulfate can be made quickly and easily using SERS from suspended gold colloid with the appropriate aggregating agents.     

PICOSECOND FLUORESCENCE STUDY OF PHOTOSYNTHETIC MUTANTS OF Chlamydomonas reinhardii: ORIGIN OF THE FLUORESCENCE DECAY KINETICS OF CHLOROPLASTS

Abstract— The fluorescence decay kinetics of photosynthetic mutants of Chlamydomonas reinhardii which lack photosystem II (PS II), photosystem I (PS I), and both PS II and PS I have been measured. The PS II mutant strain8–36C exhibits fluorescence decay lifetime components of 53, 424 and 2197 ps. The fluorescence decay of a PS I mutant strain12–7 contains two major fluorescence decay components with lifetimes of 152 and 424 ps. The fluorescence decay of mutant strain C2, which lacks both PS II and PS I, is nearly single exponential with a lifetime of 2561 ± 222 ps. In simulations in which it is assumed that wild-type decays are a simple sum of the major decay components of the isolated parts of the photosynthetic unit as measured in the mutants, curves are obtained that fit the wild-type C. reinhardii fluorescence decay data when the absorption cross-sections of PS II and PS I are weighted approximately equally. The 89 ps lifetime component in the wild-type is an average of 53 and 152 ps components arising from excitation transfer to and trapping in PS I and PS II. The single step transfer time in PS I is estimated to be between 100 and 700 fs depending on assumptions about array size. We find that between two and four visits to the PS I reaction center are required before final trapping.     

New Explanation for Ligand Bending in Transition Metal Tris(dithiolate) Complexes

The results of Fenske-Hall molecular orbital calculations are reported for the trigonal prismatic complexes Mo(S(2)C(2)H(2))(3) and Mo(S(2)C(6)H(4))(3). Both complexes exhibit a bend of the S-C-C-S ligand plane away from the S-Mo-S plane. A series of calculations which systematically follow the changes in electronic structure as the bend angle alpha is varied between 0 and 30 degrees indicates that the bend can be attributed to a second order Jahn-Teller distortion. The driving force for this distortion, which allows mixing between a set of ligand pi orbitals and the metal d(z)()()2 orbital, should be greatest for d(0) systems. In these systems the bent geometry leads to the stabilization of the doubly occupied HOMO. The driving force for ligand bending should be lower in systems having more or fewer electrons (e.g. Re(S(2)C(2)Ph(2))(3) or V(S(2)C(2)Ph(2))(3), respectively). While the steric bulk of the dithiolate ligands in the latter complexes may also influence the degree of ligand bending, this is probably a secondary effect.     

MgF(3)(-) as a transition state analog of phosphoryl transfer

The formation of complexes between small G proteins and certain of their effectors can be facilitated by aluminum fluorides. Solution studies suggest that magnesium may be able to replace aluminum in such complexes. We have determined the crystal structure of RhoA.GDP bound to RhoGAP in the presence of Mg(2+) and F(-) but without Al(3+). The metallofluoride adopts a trigonal planar arrangement instead of the square planar structure of AlF(4)(-). We have confirmed that these crystals contain magnesium and not aluminum by proton-induced X-ray emission spectroscopy. The structure adopted by GDP.MgF(-) possesses the stereochemistry and approximate charge expected for the transition state. We suggest that MgF3(-) may be the reagent of choice for studying phosphoryl transfer reactions.     

A novel frequency distribution selection method for efficient plate layout of a diverse combinatorial library.

A deterministic method (frequency distribution method) for selecting compounds from a partitioned virtual combinatorial library for efficient synthesis is presented here. The method is based on reagent frequency analysis and can be applied to any library of molecules distributed in any given partitioned chemical space (cluster, cell-based, etc.). Compound selection by reagent frequency distribution can produce a unique, diverse set of molecules that adequately represents the library while requiring the least amount of compounds to be synthesized and minimizing the number of different reagents that must be used. This method also provides a practical solution to the configuration of plate layout. Because the method essentially identifies "expensive" regions in the chemical space to synthesize for a desired diversity or similarity coverage, decisions concerning the necessity to synthesize these compounds can be addressed. Minimum compound generation and efficient plate layout results in savings both in time of synthesis and cost of materials. This method always results in a discrete solution, which can be used for any given library size as well as any combination of reagents and is also readily adaptable to robotic automation.