Simultaneous estimation of four proton pump inhibitors—lansoprazole,omeprazole, pantoprazole and rabeprazole: development of a novel generic HPLC‐UV method and its application to clinical pharmacokinetic study

A highly selective, sensitive and accurate HPLC method has been developed and validated for the estimation of four proton‐pump inhibitors (PPI), lansoprazole (LPZ), omeprazole (OPZ), pantoprazole (PPZ) and rabeprazole (RPZ), with 500 µL human plasma using zonisamide as an internal standard (IS). The sample preparation involved simple liquid–liquid extraction of LPZ, OPZ, PPZ and RPZ and IS from human plasma with ethyl acetate. The baseline separation of all the peaks was achieved with 0.1% triethylamine (pH 6.0):acetonitrile (72:28, v/v) at a flow rate of 1 mL/min on a Zorbax C₈ column. The total chromatographic run time was 11.0 min and the simultaneous elution of IS, OPZ, RPZ, PPZ and LPZ occurred at approximately 2.42, 4.45, 5.02 and 9.37 min, respectively. The method was proved to be accurate and precise at linearity range of 20.61–1999.79 ng/mL with a correlation coefficient (r) of ≥0.999. The limit of quantitation for each of the PPI studied was 20.61 ng/mL. The intra‐ and inter‐day precision and accuracy values were found to be within the assay variability limits as per the FDA guidelines. The developed assay method was applied to a pharmacokinetic study in human volunteers. Copyright © 2009 John Wiley & Sons, Ltd.     

Aligned magnetic effects through varying permeable bed

The aligned magnetic effects on a steady laminar, viscous, incompressible, conducting fluid down an open inclined channel bounded below by a bed of varying permeability has been studied when the free surface is exposed to atmospheric pressure. Beavers and Joseph slip condition at the interface of the free flow region and the fluid flow in the porous bed and the Darcy’s law in the porous medium have been used. The expressions for velocity, magnetic strength and the mass flow across the cross-section of the channel are obtained.     

Base-free monosulfonylation of amines using tosyl or mesyl chloride in water

A mild and efficient procedure has been developed for the monosulfonylation of various amines using mesyl or tosyl chlorides in water at room temperature to afford the corresponding sulfonamides in high yields.     

Phosphosulfonic acid‐catalyzed green synthesis and bioassay of α‐aryl‐α′‐1,3,4‐thiadiazolyl aminophosphonates

A series of new α‐aminophosphonates containing 1,3,4‐thiadiazole moiety (4a–l) were synthesized via a simple, efficient, and one‐pot three‐component Kabachnik–Fields reaction of 2‐amino‐5‐ethyl‐1,3,4‐thiadiazole with various aryl/heteroaryl aldehydes and diethylphosphite under solvent‐free microwave irradiation conditions using phosphosulfonic acid, as a reusable and heterogeneous solid acid catalyst. All the title compounds were screened for radical scavenging activity by DPPH and H₂O₂ methods, and antimicrobial activity against bacteria (Gram‐positive and Gram‐negative) and fungi using the disc diffusion technique. They exhibited potent in vitro antioxidant and moderate antimicrobial activity.     

Dielectric and Thermodynamic Studies on the Hydrogen Bonded Binary System of Isopropyl Alcohol and Aniline

The molecular interactions between the polar systems isopropyl alcohol (IPA) and aniline for various mole fractions at different temperatures were studied by determining the dielectric permittivity using an HP-LF impedance analyzer at radio frequencies, the plunger method in the microwave frequency range and Abbe’s refractometer in optical region. Kirkwood effective correlation factors, corrective Kirkwood correlation factors, excess permittivities, Bruggeman parameters, excess Helmholtz free energy, relaxation time, dipole moment and excessive dipole moment were calculated using the experimental data. Optimized geometries were calculated using Spartan Modeling software for both pure and equimolar systems of isopropyl alcohol and aniline for Hamiltonian quantum mechanical calculations. Conformational analysis of the formation of hydrogen bond between the two systems is supported by the FT-IR spectra.     

Heavy quarkonia spectra and their decays in a relativistic quark model

Using the phenomenological relativistic harmonic model (RHM) for quarks, we have obtained the masses of S wave charmonium and bottomonium states. The full Hamiltonian used in the investigation has Lorentz scalar plus vector confinement potential, along with the confined one gluon exchange potential (COGEP). A good agreement with the experimental masses for the ground and the radially excited states is obtained both for the triplet and singlet S wave mesons. The decay properties of the ground state charmonium and bottomonium are investigated.     

An alternative total synthesis of diplodialide-B

In this paper, an enantioselective synthesis of diplodialide-B has been described. To accomplish this target, a combination of regioselective ring opening of the chiral epoxide, Jacobsen hydrolytic kinetic resolution and Yamaguchi macrolactonization were used as the key steps.     

Polymer encapsulation of yttrium oxysulfide phosphorescent particles via miniemulsion polymerization

Yttrium oxysulfide upconverting phosphor particles can absorb infrared light and emit dopant‐dependent visible phosphorescence. This unique optical property has been used for particle‐based immunoassay applications. In this study, upconverting phosphor particles were encapsulated with a functionalized polymer (carboxylated polystyrene) shell layer via several approaches, which included the following: (1) the physical adsorption of the carboxylated polystyrene polymer onto the phosphor surfaces, (2) the miniemulsification of the preformed carboxylated polystyrene in a solvent in the presence of the phosphor particles and the subsequent stripping off of the solvent, and (3) the miniemulsification and miniemulsion copolymerization of styrene and methacrylic acid in the presence of the phosphor particles with hexadecane as a costabilizer in combination with a surfactant (sodium dodecyl sulfate, sodium dodecylbenzene sulfonate, or sodium dihexyl sulfosuccinate). Miniemulsion technology proved to be the most effective method for forming a functionalized polymeric nanoshell surrounding the phosphor particles. The morphology of the encapsulated phosphor particles was found to vary from symmetric core–shell (i.e., a uniform nanoshell layer with varying shell thicknesses), asymmetric core–shell, dumbbell‐like, or raspberry‐like partial encapsulation to multiparticle encapsulation. The amount of multiparticle encapsulation could be reduced by the postaddition of a surfactant, but it could not be eliminated completely. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1038–1054, 2007     

Improvement in mechanical and optical properties of vapour chopped vacuum evaporated PANI/PMMA composite thin film

PANI/PMMA composite was synthesized by emulsion polymerization pathway and the composite thin film was obtained by vacuum evaporation. The effect of vapour chopping and varying PMMA concentration was also studied. The FTIR spectra showed that the PANI/PMMA composite thin film deposited as a short chain oligomers. Increase in transmittance and decrease in refractive index was obtained with increasing concentration of PMMA, which further increased the adhesion and decreased intrinsic stress. The vapour chopping improved its optical as well as mechanical properties and produced smoother surface morphology. Increase of PMMA made the film more amorphous and does not change its band gap.