Conformationally restricted linear polyurethanes from acetalized sugar‐based monomers

Linear polyurethanes based on sugar monomers having D ‐gluco, galacto, and D ‐manno configurations and their secondary hydroxyl groups protected as bicyclic acetals, have been prepared by polyaddition reaction of these diol monomers to hexamethylene diisocyanate ( HMDI ) and 4,4′‐methylene‐bis(phenyl isocyanate) ( MDI ). The new polyurethanes seem to be amorphous materials, except that obtained from 2,3:4,5‐di‐O‐methylene‐galactitol and HMDI. Weight‐average molecular weights, determined by GPC, were in the range 16,000–115,200. TGA analyses indicated that the thermal stability of these bicyclic polyurethanes is comparable to those based on the isosorbide; both the onset and the maximum rate decomposition temperatures increased significantly with respect to the polyurethanes based on acyclic sugar monomers. The presence of the acetalized alditol units in the polyurethanes also increased the T_gs as compared with their acyclic analogs. Deacetalization of the polyurethanes containing di‐O‐isopropylidene‐D ‐mannitol units yielded the polyhydroxylated polymers in good yields, without apparent degradation of the polymer chain. These hydroxylated polymers showed an enhanced hydrophilicity and degradability and lower T_gs and thermal stability than their parent acetalized polyurethanes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Assessing factors influencing the release of hexazinone from clay-based formulations

New designs of pesticide formulations based on organoclays are receiving increasing attention in reducing offsite movement of pesticides in the environment and in prolonging the efficacy of soil-applied pesticides. In the present article, we report the results of laboratory and field experiments conducted to evaluate the influence of the saturating cation, the sorbent : herbicide ratio, and the type of preparation on the controlled release properties of organoclay-based formulations of the herbicide hexazinone. Two organoclays with different affinities for hexazinone (hexadecyltrimethylammonium-exchanged Arizona montmorillonite, HDTMA-SA, and phenyltrimethylammonium-exchanged Arizona montmorillonite, PTMA-SA), two herbicide loadings (10% and 20% AI), and three types of preparation were assayed. Laboratory experiments showed that hexazinone formulations based on HDTMA-SA displayed slow-release properties in water, retarded herbicide leaching through soil columns, and maintained a herbicidal efficacy similar to that of the currently available commercial hexazinone formulation (wettable powder). In contrast, PTMA-SA formulations released the herbicide instantaneously and did not display slow-release properties. High organoclay-herbicide ratios and the use of organic solvent made the interaction between HDTMA-SA and the herbicide more intimate and reduced the release rate of hexazinone, suggesting that a range of release and leaching behaviours can be achieved by selecting the type of preparation and the herbicide loading in the formulations. A field experiment confirmed the usefulness of HDTMA-SA formulations of hexazinone to reduce herbicide leaching while maintaining weed-control efficacy.     

A Quantitative Determination of Atmospheric Deposition Sources in the “Campo de Gibraltar” Region,Using Factor Analysis and Chemical Element Balance

Abstract

Factor analysis and chemical element balance were employed to identify and quantify the major atmospheric deposition sources at 12 sampling stations in the “Campo de Gibraltar” Region. The data were best represented with 5 sources: soil, marine aerosol, residual fuel oil, refuse and limestone. Predicted concentrations account for about 80% of measured total deposition.     

离子声等离子体波的动力屏蔽

本文讨论了离子声等离子体波的激发条件和它们对荷电粒子间相互作用势的动力屏蔽效应.对一些具有两个未完全被充满的外层电子能带的金属,计算了这种屏蔽效应,并研究了此动力效应对金属钯中氘-氘聚变反应率的影响.     

Comparative Mössbauer and sem study of the corrosion reaction of iron and weathering steel in SO2-polluted atmospheres

A kinetic CEMS study of the early corrosion stages of iron and weathering steel in low (LAC) and very low (VLAC) SO₂-polluted atmospheres has been carried out. The morphology and sulphur content of corrosion products were examined with SEM-EDAX.     

Photometric determination of palladium with the inclusion complex 1,2-Diaminoanthraquinone-β-cyclodextrin as ligand

1,2-Diaminoanthraquinone forms a 11 inclusion complex with-cyclodextrin in aqueous media and at different pH. This can be employed to solubilize the anthraquinone in water for use as a ligand for metal ions. This ligand can be used to determine palladium at trace levels spectrophotometrically. The limit of detection is 11 ng/ml and the R.S.D. is 2.1%. The performance can be improved by using derivative spectrometry.     

Single-laboratory validation of a method for the determination of furan in foods by using headspace gas chromatography/ mass spectrometry, part 2--low-moisture snack foods

In 2004, a quantitative headspace (HS) gas chromatographic/mass spectrometric method was developed and used to determine furan in approximately 300 foods. This method was modified and validated for the determination of furan in low-moisture snack foods. The modifications include a smaller test portion size and lower HS oven temperature. The limits of detection ranged from 0.4 ng/g in graham crackers to 4.4 ng/g in pretzels. Recoveries from samples fortified at 0.5, 1,2, and 3 times the levels of incurred furan found in the samples ranged from 96 to 102%, and HorRat values showed that the recovery data met the criteria for repeatability. The modified method was shown to be reliable for the determination of furan in foods when test portions were equilibrated for 30 min in a 60 degrees C HS oven. The modified method was used to conduct a survey of furan in 22 low-moisture snack foods. All of the samples were found to contain furan ranging from 3.7 ng/g in graham crackers to 60 ng/g in corn chips. Results from the survey were consistent with results obtained for similar snack foods analyzed by a U.S. Food and Drug Administration field laboratory.     

Analysis of tetramethylene disulfotetramine in foods using solid-phase microextraction-gas chromatography-mass spectrometry

An automated solid-phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS) method for the determination of tetramethylene disulfotetramine in foods was developed. A comparison of direct immersion (DI) and headspace (HS) extraction techniques using a 70microm carbowax/divinylbenzene (CW/DVB) fiber is presented. The optimized DI-SPME method provided an aqueous extraction limit of detection (LOD) of 9.0ng/g while the HS-SPME LOD was 2.7ng/g. In both SPME modes, recovery was highly matrix dependent and quantification requires standard addition calibrations. Analysis of foods using DI-SPME encountered many obstacles including fiber fouling, low recovery and poor reproducibility. HS-SPME was successfully applied to food analysis with minimal interferences. Standard addition calibration curves for foods gave high linearity (R2>0.98), reproducibility (RSD<12%) and sensitivity with LODs ranging from 0.9 to 4.3ng/g.     

Recoverable (R)- and (S)-binap-Ag(I) complexes for the enantioselective 1,3-dipolar cycloaddition reaction of azomethine ylides

The first enantioselective 1,3-dipolar cycloaddition reaction of amino acid derived azomethine ylides and maleimides catalyzed by very stable and recyclable chiral (R)- or (S)-binap-AgClO(4) complexes is described. The reactions are performed at room temperature, in good yields, with high endo diastereoselectivity and enantioselectivity, the complex being recovered by simple filtration.