Sample preparation procedure for the determination of sulphur and trace metals in oil products by the ICP with a minitorch using emulsions

A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with low sulphur content, the other sulfonated). Aqueous standard solutions can be used for the preparation of calibration solutions. The contents of S, Al, Cr, Cu, Fe, Mg, Ni and Pb in aqueous emulsions were determined and the results were in good agreement with the composition of oil standard solutions used for control analysis procedure.     

Gravitational collapse of a charged and radiating fluid ball in the diffusion limit

The collapse of a charged and radiating ball in the diffusion limit is studied using a method reported by Herrera and collaborators. The interior solution is matched with the exterior Reissner-Nordström-Vaidya metric to obtain a system of differential equations at the surface of the distribution, which can be integrated numerically for some set of initial data. For one model, the profiles of the physical variables are obtained at any piece of the material in terms of Schwarzschild-like coordinates.     

Pyrolysis chemical ionization mass spectrometry of cellulose ethers

Pyrolysis ammonia chemical ionization (PyCI) mass spectrometry was performed on hy-droxyethyl-, hydroxypropyl-,methyl-, hydroxypropylmethyl-, and ethylhydroxyethyl cel-luloses. The mass peaks in the PyCI mass spectra of these cellulose ethers could be assigned to the ions of pyrolytic dissociation products which form via the [2 + 2 + 2] cycloreversion and the E_i elimination pyrolysis pathway. Structural information about the residual amount of nonderivatized cellulose, the relative chain length distributions of the substituents in hydroxyalkyl celluloses, and the end-capping of hydroxyalkyl substituents by alkyl groups in the mixed cellulose ethers is obtained. Interference of secondary pyrolysis products in the PyCI mass spectra is found to be of minor importance, especially in the lower mass regions. © 1995 John Wiley & Sons, Inc.     

A New Flow Instrument for Conductance Measurements at Elevated Temperatures and Pressures: Measurements on NaCl(aq) to 458 K and 1.4 MPa

A new flow electrical conductance instrument was constructed and tested on dilute NaCl solutions up to 458 K, and on more concentrated solutions (maximum 0.436 mol⋅kg⁻¹) at 373 K. The results of the new instrument agreed with those of previous authors within the estimated experimental errors. The model of Bernard et al. (J. Phys. Chem. 96, 3833–3840 (1992), MSA) was found to represent the high-temperature results without introducing an ion-pairing equilibrium constant. The Fuoss–Hsia conductance equation as given by Fernandez-Prini was found to represent the dilute concentrations with Λ° (NaCl) as the only adjustable parameter. It was found that Λ° (NaCl) could be expressed as a function of solvent viscosity and density by using three parameters found by regression of literature results between 278.15 and 523 K. This equation along with the FHFP theory permits the equivalent conductivity of dilute sodium chloride solutions to be calculated within the accuracy of the existing experimental measurements.     

Convex ordering criteria for Lévy processes

Modelling financial and insurance time series with Lévy processes or with exponential Lévy processes is a relevant actual practice and an active area of research. It allows qualitatively and quantitatively good adaptation to the empirical statistical properties of asset returns. Due to model incompleteness it is a problem of considerable interest to determine the dependence of option prices in these models on the choice of pricing measures and to establish nontrivial price bounds. In this paper we review and extend ordering results of stochastic and convex type for this class of models. We also extend the ordering results to processes with independent increments (PII) and present several examples and applications as to α-stable processes, NIG-processes, GH-distributions, and others. Criteria are given for the Lévy measures which imply corresponding comparison results for European type options in (exponential) Lévy models.     

Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

Optical reflectance of blue bronze crystals near the Peierls transition

We report on the reflectance of blue bronze crystals in the visible frequency range as a function of temperature. The observed large oscillations in the reflectance at all wavelengths at temperatures near the Peierls transition are interpreted as interference effects stemming from a surface layer. It is found that the surface layer, which appears to be tied to fluctuations, can be as much as 1.6 microns thick.     

On the stability of bcc Co in Co/Fe superlattices an NMR and XRD study

While RHEED observations show that 10 to 11 As is the stability limit for an open bcc Co layer when grown on an Fe substrate, our XRD and NMR studies have shown that, in MBE grown Co/Fe superlattices, cobalt can be stabilised in a bcc structure up to a critical Co thickness of 21 Ås. In order to understand this apparent discrepancy, NMR experiments have been carried out in Co_x/Fe_y multilayers with thickness varying in the range 5 Å < x < 42 Å and 24 Å < y < 60 Å, grown on GaAs (1 1 0) as well as on MgO (1 0 0) substrates. The analysis of the chemical short range order by NMR concludes that the larger bcc Co thickness observed in superlattices results from the formation of a rather homogeneous CoFe_20% bcc alloy which contains the supplementary 10–11 As of Co and which coexists with pure Co grains. The concentration of about 20% Fe in the alloyed part of the Co layer happens to be close to the stability limit for a bcc structure in the equilibrium phase diagram of bulk CoFe alloys. However, while a mixture of bcc and fcc phases is observed in bulk alloys, the bcc structure is preserved in all phases under the MBE growth conditions and below the critical thickness. Above the critical thickness amixture of bcc Co, bcc CoFe and hcp Co is observed.