Structural and optical properties of 6CaO·6SrO·7Al2O3 thin films derived by sol-gel dip coating process

The nanostructured 6CaO·6SrO·7Al₂O₃ (C6S6A7) thin films with cubic structure using calcium, strontium metals, aluminium isopropoxide and ethylene glycol monomethyl ether as stating materials has been fabricated via sol-gel route. Based on hydrolysis of Ca²⁺, Sr²⁺ and Al³⁺ in the sol-gel processing using ethylene glycol monomethyl ether as solvent have been employed as the precursor material. The films were coated on soda lime float glass by the dip coating technique and annealed at 450 °C in air atmosphere. The structure, morphology and composition of the films were investigated by Fourier transformed infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy, atomic force microscopy and X-ray photoelectron spectroscopy indicating that the films were composed of C6S6A7 nanoparticles with cubic structure. The spectral transmittance of the films was measured in the wavelength range of 200-1100 nm using an UV-visible spectrometer. It has been found that the optical properties of the films significantly affected by precursor chemistry and annealing temperature due to the improvement of the crystallinity of the films with increasing annealing temperature and became stable when the annealing temperature is higher than 450 °C. The C6S6A7 films annealed at 450 °C had high transparency about 80% in wide visible range.     

The effect of membrane fluidity on FRET parameters: an energy transfer study inside small unilamellar vesicle

The fluorescence resonance energy transfer (FRET) in a lipid bilayer system containing two different donors and one common acceptor at below and above transition temperature has been studied and all the FRET parameters are analyzed using steady state and time-resolved fluorescence spectroscopy. Using dynamic light scattering measurement, we have followed the process of preparation of small unilamellar vesicles, and by following the FRET parameters of C-153-Rh6G and C-151-Rh6G pairs inside SUVs at 16 °C and 33 °C (T(m) = 23.9 °C) we have noticed that there is greater effect of temperature on the FRET parameters in case of the C-153-Rh6G pair than that of the C-151-Rh6G pair. Finally we have concluded that this difference is due to their different location inside the lipid bilayer in which fluidity of the long alkyl chain markedly affects the FRET parameters for C-153-Rh6G pair embedded inside a small unilamellar vesicle of size 20-50 nm.     

Spectral and temporal changes of optical pulses propagating through time-varying linear media

We present universal formulas for the spectral and temporal output optical fields from a linear traveling-wave medium whose refractive index changes during its propagation within the medium. These formulas agree with known changes in central wavelength and energy that are associated with adiabatic wavelength conversion (AWC). Moreover, they reveal new changes to the optical pulses that have not been noticed, such as pulse compression and spectral broadening. Most significantly, we find that AWC alters the pulse power, pulse chirp, and pulse delay. All of these effects depend on whether the central wavelength is blueshifted or redshifted, the first sign of asymmetry to be reported for AWC. These findings impact the applications of AWC to optical signal processing in microphotonic and nanophotonic structures as well as in lightwave systems.     

A novel method for ranitidine hydrochloride determination in aqueous solution based on fluorescence quenching of functionalised CdS QDs through photoinduced charge transfer process: spectroscopic approach

A novel method for the quantitative determination of ranitidine hydrochloride (RNH) based on the fluorescence quenching of functionalised CdS quantum dots (QDs) by RNH in aqueous solution was proposed. The method is simple, rapid, specific and highly sensitive with good precision. The thioglycolic acid (TGA)-capped CdS QDs were synthesized from cadmium nitrate and sodium sulfide in alkaline solution. Under the optimal conditions, the Stern-Volmer calibration plot of F(0)/F against concentration of RNH was linear in the range of 0.50-15.0 μg mL(-1) with a correlation coefficient of 0.996. The limit of detection (LOD) was 0.38 μg mL(-1). The method was satisfactorily applied to the direct determination of RNH in pharmaceutical formulations with no significant interference from excipients. The results were found to be in good agreement with those obtained by the reference method and the claimed value. The accuracy and reliability of the method were further ascertained by recovery studies via the standard-addition method, with percentage recoveries in the range of 98.47 to 102.30%. The possible fluorescence quenching mechanism for the reaction was also discussed.     

Fluorescence enhancement effect for the determination of adenosine 5'-monophosphate with 9-anthracene carboxylic acid-cetyl trimethyl ammonium bromide system

A fluorimetric method based on fluorescence enhancement effect was developed for the determination of adenosine 5′-monophosphate (AMP) with 9-anthracene carboxylic acid (9-ANCA)–cetyl trimethyl ammonium bromide (CTAB) system. Fluorescence intensity of 9-ANCA was decreased by the addition of CTAB but addition of AMP again rose the intensity of 9-ANCA gradually. The observed fluorescence enhancement is attributed to the competitive binding reaction of 9-ANCA and adenosine to CTAB. The enhancement in the fluorescence intensity was found proportional to the concentration of AMP over the range 2.0 × 10⁻⁴ to 1.2 × 10⁻³ mol dm⁻³. The ion pair complex is formed spontaneously between 9-ANCA and CTAB. Since the binding interaction is larger for the adenosine–CTAB pair, the fluorophore 9-ANCA will be released. The quantum yield of free 9-ANCA is higher therefore its fluorescence observed at 417 nm wavelength is enhanced. This mechanism of competitive molecular interaction is further confirmed by conductometric measurements. The method was applied successfully for the determination of AMP from pharmaceutical sample. The method is more selective, sensitive and relatively free from interferences.     

Fabrication and chemical surface modification of nanoporous silicon for biosensing applications

In this work, porous silicon (PS) films with varied porosity (68–82%) were formed on the p-type, boron-doped silicon wafer (100) by the electrochemical anodisation in an aqueous hydrofluoric acid and isopropyl alcohol solution at different current densities (I _d) ranging from 20–70 mA cm^?2, respectively. Biofunctionalisation of the PS surface was carried out by chemically modifying the surface of PS by the deposition of 3-aminopropyltriethoxysilane thermally leading to high density of amine groups covering the PS surface. This further promotes the immobilisation of immunoglobulin (human IgG and goat anti-human IgG binding) on to the PS surface. Formation of nanostructured PS and the attachment of antibody–antigen to its surface were characterised using photoluminescence (PL), Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy techniques, respectively. The possibility of using these structures as biosensors has been explored based on the significant changes in the PL spectra before and after exposing the PS optical structures to biomolecules. These experimental results open the possibility of developing optical biosensors based on the variation of the PL position of the PL spectra of PS-based devices.     

An Efficient and Modified Biginelli-Type Synthesis of 3,4-Dihydro-1H-indeno[1,2-d]pyrimidine-2,5-dione Using Phosphorous Pentoxide

A simple, clean and convenient one-pot method has been developed for the synthesis of 4-phenyl-3,4-dihydro-1H-indeno[1,2-d]pyrimidine-2,5-dione and 4-phenyl-2-thioxo-1,2,3,4-tetrahydro-5H-indeno[1,2-d]pyrimidine-5-one by multicomponent condensation of 1,3-indanedione, aromatic aldehydes and urea/thiourea using phosphorus pentoxide in ethanol under reflux conditions. The simple workup procedure and moderate to good yields within short time are some important features of this protocol. The synthesized compounds have been interpreted on the basis of their spectroscopic data.     

Long live vinylidene! A new view of the H(2)C=C: --> HC triple bond CH rearrangement from ab initio molecular dynamics.

We present complete active space self-consistent field (CASSCF) ab initio molecular dynamics (AIMD) simulations of the preparation of the metastable species vinylidene, and its subsequent, highly exothermic isomerization to acetylene, via electron removal from vinylidene anion (D(2)C=C(-) --> D(2)C=C: --> DC triple bond CD). After equilibrating vinylidene anion-d(2) at either 600 +/- 300 K (slightly below the isomerization barrier) or 1440 K +/- 720 K (just above the isomerization barrier), we remove an electron to form a vibrationally excited singlet vinylidene-d(2) and follow its dynamical evolution for 1.0 ps. Remarkably, we find that none of the vinylidenes equilibrated at 600 K and only 20% of the vinylidenes equilibrated at 1440 K isomerized, suggesting average lifetimes >1 ps for vibrationally excited vinylidene-d(2). Since the anion and neutral vinylidene are structurally similar, and yet extremely different geometrically from the isomerization transition state (TS), neutral vinylidene is not formed near the TS so that it must live until it has sufficient instantaneous kinetic energy in the correct vibrational mode(s). The origin of the delay is explained via both orbital rearrangement and intramolecular vibrational energy redistribution (IVR) effects. Unique signatures of the isomerization dynamics are revealed in the anharmonic vibrational frequencies extracted from the AIMD, which should be observable by ultrafast vibrational spectroscopy and in fact are consistent with currently available experimental spectra. Most interestingly, of those trajectories that did isomerize, every one of them violated conventional transition-state theory by recrossing back to vinylidene multiple times, against conventional notions that expect highly exothermic reactions to be irreversible. The dynamical motion responsible for the multiple barrier recrossings involves strong mode-coupling between the vinylidene CD(2) rock and a local acetylene DCC bend mode that has been recently observed experimentally. The multiple barrier recrossings can be used, via a generalized definition of lifetime, to reconcile extremely disparate experimental estimates of vinylidene's lifetime (differing by at least 6 orders of magnitude). Last, a caveat: These results are constrained by the approximations inherent in the simulation (classical nuclear motion, neglect of rotation-vibration coupling, and restriction to C(s) symmetry); refinement of these predictions may be necessary when more exact simulations someday become feasible.     

Testing significance of a mean vector—A possible alternative to Hotelling'sT 2

In problems involving multivariate measurements experimental considerations often indicate grouping of variables into subsets ordered according to their importance. In such situations, the problems such as comparison of two mean vectors and profile analysis may be treated by Hotelling'sT ²-test adapted along the lines of the step-wise procedure of J. Roy [10], or the well known test for additional information due to Rao [9]. In this paper we study a modification of the step-wise procedure obtained by combining the component tests. The exact Bahadur slopes of resulting procedures are computed and it is shown that the procedure based upon Fisher's combination method is asymptotically equivalent to Hotelling'sT ². A Monte Carlo study suggests that even in small samples the power functions of the new method and Hotelling'sT ²-test are practically equivalent. Research sponsored by the Air Force Office of Scientific Research, Air Force Systems Command, USAF under Grant No. AFOSR-77-3360. The United States Government is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright notation hereon.