Acid–Base Chemistry at the Ice Surface: Reverse Correlation Between Intrinsic Basicity and Proton‐Transfer Efficiency to Ammonia and Methyl Amines

Proton transfer from the hydronium ion to NH₃, CH₃NH₂, and (CH₃)₂NH is examined at the surface of ice films at 60 K. The reactants and products are quantitatively monitored by the techniques of Cs⁺ reactive‐ion scattering and low‐energy sputtering. The proton‐transfer reactions at the ice surface proceed only to a limited extent. The proton‐transfer efficiency exhibits the order NH₃>(CH₃)NH₂=(CH₃)₂NH, which opposes the basicity order of the amines in the gas phase or aqueous solution. Thermochemical analysis suggests that the energetics of the proton‐transfer reaction is greatly altered at the ice surface from that in liquid water due to limited hydration. Water molecules constrained at the ice surface amplify the methyl substitution effect on the hydration efficiency of the amines and reverse the order of their proton‐accepting abilities.     

Die Möglichkeiten der Anwendung der Wechselstrompolarographie auf die Messung der Geschwindigkeitskonstanten

Zusammenfassung Die Wechselstrompolarographie ist für die Messung der Geschwindigkeitskonstanten der Elektrodenprozesse im Bereich von 5·10^–3–5·10^–2 cm sec^–1 anwendbar. Das bestätigen auch die Ergebnisse, die für ein Modellsystem erhalten wurden. Experimentell wurde die Anwendbarkeit der Methode am Redoxsystem [CrCl₂(H₂O)₄]⁺–[CrCl₂(H₂O)₄] in sauren 4–9n-LiCl-Lösungen nachgeprüft, und zwar durch den Vergleich der Resultate mit den Ergebnissen der Messungen derFaraday-impedanz und der Methode der überlagerten Spannung.

---

Application of alternating current polarography for the measurement of rate constants

The method of alternating current polarography is known to be applicable to the measurement of rate constants of electrode reactions within the range of 5·10^–3 to 5·10^–2 cm sec^–1. This follows also from the results obtained with model systems. The applicability of the method has been studied in the redox-system [CrCl₂(H₂O)₄]⁺–[CrCl₂(H₂O)₄] in acid solutions of 4N to 9N LiCl. The results were compared with those obtained by measuring the faradaic impedance and with the results of the method of periodically changed rectangular voltage.

---

---

Mit 7 Abbildungen     

A novel route to fully substituted cyanoallenes from three components, ketones, chloromethyl p-tolyl sulfoxide, and nitriles, via α-bromocyclopropyl p-tolyl sulfoxides

Treatment of 1-chlorovinyl p-tolyl sulfoxides, which were derived from ketones and chloromethyl p-tolyl sulfoxide in high yields, with lithium α-carbanion of nitriles gave the adducts in quantitative yields. The adducts were converted to α-bromocyclopropyl p-tolyl sulfoxides in two steps in good yields. Finally, the sulfoxides were treated with excess lithium carbanion of isobutyronitrile to afford fully substituted cyanoallenes in high to quantitative yields via sulfoxide-lithium exchange reaction. This procedure offers a novel synthetic method for fully substituted cyanoallenes with coupling of three components (ketones, chloromethyl p-tolyl sulfoxide, and nitriles) in good overall yields.     

Synthesis and characterization of new organosoluble and gas‐permeable polyimides from bulky substituted pyromellitic dianhydrides

Two new pyromellitic dianhydrides, 1,4‐bis(4′‐t‐butylphenyl) pyromellitic dianhydride and 1,4‐bis(4′‐trimethylsilylphenyl) pyromellitic dianhydride, were synthesized via Suzuki coupling, oxidation, and dehydration. A series of new organosoluble polyimides were prepared from the obtained pyromellitic dianhydride and various aromatic diamines by the conventional polycondensation reaction followed by chemical imidization, as well as high‐temperature, one‐step polymerization. The structures of the dianhydrides and polymers were identified with various spectroscopies. The inherent viscosities of the resulting polymers were 0.62–1.89 dL/g. The synthesized polyimides showed good solubility in various organic solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, and p‐chlorophenol. These polymers had glass‐transition temperatures of 230–260 °C. Thermogravimetric analysis showed that all the polymers were stable, with 10% weight losses recorded above 490 °C in nitrogen. The polyimide films had good mechanical properties and high oxygen permselectivity to nitrogen. The oxygen permeability coefficient (P) and the permselectivity of oxygen to nitrogen (P/P) of the films were 13–56 barrer and 3.7–5.5, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4288–4296, 2002     

Prostaglandin E2 stimulates angiogenesis by activating the nitric oxide/cGMP pathway in human umbilical vein endothelial cells

Prostaglandin E2 (PGE2), a major product of cyclooxygenase, has been implicated in modulating angiogenesis, vascular function, and inflammatory processes, but the underlying mechanism is not clearly elucidated. We here investigated the molecular mechanism by which PGE2 regulates angiogenesis. Treatment of human umbilical vein endothelial cells (HUVEC) with PGE2 increased angiogenesis. PGE2 increased phosphorylation of Akt and endothelial nitric oxide synthase (eNOS), eNOS activity, and nitric oxide (NO) production by the activation of cAMP-dependent protein kinase (PKA) and phosphatidylinositol 3-kinase (PI3K). Dibutyryl cAMP (DB-cAMP) mimicked the role of PGE2 in angiogenesis and the signaling pathway, suggesting that cAMP is a down-stream mediator of PGE2. Furthermore, PGE2 increased endothelial cell sprouting from normal murine aortic segments, but not from eNOS-deficient ones, on Matrigel. The angiogenic effects of PGE2 were inhibited by the inhibitors of PKA, PI3K, eNOS, and soluble guanylate cyclase, but not by phospholipase C inhibitor. These results clearly show that PGE2 increased angiogenesis by activating the NO/cGMP signaling pathway through PKA/PI3K/Akt-dependent increase in eNOS activity.     

Der f 2 activates phospholipase D in human T lymphocytes from Dermatophagoides farinae specific allergic individuals: involvement of protein kinase C-alpha

The major house-dust mite allergen, Der f 2, stimulates the phospholipase D (PLD) in T lymphocytes from Dermatophagoides farinae specific allergic individuals. PLD activity increased more than two-fold in T cells from allergic patients compared with those cells from normal controls with maximal responses within 30 min after exposure of Der f 2. A well-known PLD activator PKC-alpha was found to be translocated to membrane from cytosol in Der f 2-treated T cells from Dermatophagoides farinae specific allergic individuals. Down-regulation of PKC-alpha with phorbol myristate acetate pretreatment for 24 h abolished Der f 2-induced PLD activation. Ro 320432, PKC inhibitor also reduced the effects of Der f 2-induced PLD activation suggesting that PKC-alpha acts as upstream activator of PLD in Der f 2-treated T cells. Taken together, the present data suggest that Der f 2 can stimulate PLD activity through the PKC-alpha activation in T cells from Dermatophagoides farinae allergic individuals.     

Organizational and mutational analysis of a complete FR-008/candicidin gene cluster encoding a structurally related polyene complex

The complete gene cluster for biosynthesis of a polyene complex, FR-008, spans 137.2 kb of the genome of Streptomyces sp. FR-008 consisting of six genes for a modular PKS and 15 additional genes. The extensive similarity to the partially characterized candicidin gene cluster in Streptomyces griseus IMRU3570, especially for genes involved in mycosamine biosynthesis, prompted us to compare the compounds produced by Streptomyces sp. FR-008 and Streptomyces griseus IMRU3570, and we found that FR-008 and candicidin complex are identical. A model for biosynthesis of a set of four structurally related FR-008/candicidin compounds was proposed. Deletion of the putative regulatory genes abolished antibiotic production, while disruption of putative glycosyltransferase and GDP-ketosugar aminotransferase functionalities led to the productions of a set of nonmycosaminated aglycones and a novel polyene complex with attachment of altered sugar moiety, respectively.     

Searching ultimate nanometrology for AlOx thickness in magnetic tunnel junction by analytical electron microscopy and X-ray reflectometry.

Practical analyses of the structures of ultrathin multilayers in tunneling magneto resistance (TMR) and Magnetic Random Access Memory (MRAM) devices have been a challenging task because layers are very thin, just 1-2 nm thick. Particularly, the thinness (approximately 1 nm) and chemical properties of the AlOx barrier layer are critical to its magnetic tunneling property. We focused on evaluating the current TEM analytical methods by measuring the thickness and composition of an AlOx layer using several TEM instruments, that is, a round robin test, and cross-checked the thickness results with an X-ray reflectometry (XRR) method. The thickness measured by using HRTEM, HAADF-STEM, and zero-loss images was 1.1 nm, which agreed with the results from the XRR method. On the other hand, TEM-EELS measurements showed 1.8 nm for an oxygen 2D-EELS image and 3.0 nm for an oxygen spatially resolved EELS image, whereas the STEM-EDS line profile showed 2.5 nm in thickness. However, after improving the TEM-EELS measurements by acquiring time-resolved images, the measured thickness of the AlOx layer was improved from 1.8 nm to 1.4 nm for the oxygen 2D-EELS image and from 3.0 nm to 2.0 nm for the spatially resolved EELS image, respectively. Also the observed thickness from the EDS line profile was improved to 1.4 nm after more careful optimization of the experimental parameters. We found that EELS and EDS of one-dimensional line scans or two-dimensional elemental mapping gave a larger AlOx thickness even though much care was taken. The reasons for larger measured values can be found from several factors such as sample drift, beam damage, probe size, beam delocalization, and multiple scattering for the EDS images, and chromatic aberration, diffraction limit due to the aperture, delocalization, alignment between layered direction in samples, and energy dispersion direction in the EELS instrument for EELS images. In the case of STEM-EDS mapping with focused nanoprobes, it is always necessary to reduce beam damage and sample drift while trying to maintain the signal-to-noise (S/N) ratio as high as possible. Also we confirmed that the time-resolved TEM-EELS acquisition technique improves S/N ratios of elemental maps without blurring the images.     

Development of Photoactivated Fluorescent N‐Hydroxyoxindoles and Their Application for Cell‐Selective Imaging

Photoactivatable fluorophores are essential tools for studying the dynamic molecular interactions within important biological systems with high spatiotemporal resolution. However, currently developed photoactivatable fluorophores based on conventional dyes have several limitations including reduced photoactivation efficiency, cytotoxicity, large molecular size, and complicated organic synthesis. To overcome these challenges, we herein report a class of photoactivatable fluorescent N‐hydroxyoxindoles formed through the intramolecular photocyclization of substituted o‐nitrophenyl ethanol (ONPE). These oxindole fluorophores afford excellent photoactivation efficiency with ultra‐high fluorescence enhancement (up to 800‐fold) and are small in size. Furthermore, the oxindole derivatives show exceptional biocompatibility by generating water as the only photolytic side product. Moreover, structure–activity relationship analysis clearly revealed the strong correlation between the fluorescent properties and the substituent groups, which can serve as a guideline for the further development of ONPE‐based fluorescent probes with desired photophysical and biological properties. As a proof‐of‐concept, we demonstrated the capability of a new substituted ONPE that has an uncaging wavelength of 365–405 nm and an excitation/emission at 515 and 620 nm, for the selective imaging of a cancer cell line (Hela cells) and a human neural stem cell line (hNSCs).