DSC and X-ray studies on side-chain crystallization of comb-like polymers

Thermal properties of acrylate and methacrylate monomers containing long-fluorocarbon chains (H(CF₂)_nCH₂OCOCH=CH₂, (F_nA) and H(CF₂)_nCH₂OCOC(CH₃)=CH₂, (F_nMA), wheren=6, 8, 10) and their comb-like polymers have been investigated by differential scanning calorimeter (DSC) and X-ray diffraction. The comb-like polymers (PF₁₀A and PF₁₀MA) with sufficiently long-fluorocarbon chains showed a simple melting and crystallizing behavior. For the fusion of PF₁₀A in 1st heating, enthalpy change H _f was 18 kJ mol^–1 and entropy change S _f was 45 J K^–1 mol^–1, while for PF₁₀MA the values H _f and S_f were 5.3 kJ mol^–1 and 14 J K^–1 mol^–1, respectively. Melted PF₈A crystallized slowly, whereas PF₈MA with same fluorocarbon chain and also both of PF₆A and PF₆MA with shorter fluorocarbon chains can hardly crystallize by the aggregation of side-chains. Effects of the length of side-chain and the flexibility of main chain on the side-chain crystallization of comb-like polymers are clear. Crystallization process of the methacrylate monomers was sensitively affected by the scanning rate of DSC measurement and the length of fluorocarbon chains.     

Reversed-phase,high-performance,thin-layer chromatography of metal tetrakis (p-tolyl) porphine complexes on octadecylbonded stationary phase

Summary The metal complexes ofmeso-tetrakis (p-tolyl) porphine (TTP) are chromatographed on octadecyl-bonded silica gel thin-layer with various organic solvents of relatively high polarity used as the eluent. The mobility of the metal-TTP complex depends on its centralmetal, increasing in the order of Cu(II)<Pd(II)NI(II)<TTP free acid<V(IV) as vanadyl<Zn(II)<Mg(II), although some irregularities are found with the different developing solvents used. The concept of Hildebrand's solubility parameter is applied to the discussion of the mobility of each compound, on the solvents used as the developer. Successful separation of the TTP compounds is performed by using a mixture of acetone and acetonitrile as the developer, although the Ni- and Pd-complexes are not completely resolved.     

Separtation of metal tetrakis(p-tolyl)porphine complexes by reversed-phase high-performance liquid chromatography

Summary The feasibility of reversed-phase high-performance liquid chromatography for the separation of several metal complexes ofmeso-tetrakis(p-tolyl)porphine (TTP) is described. A combination of an octadecyl-bonded stationary phase with a non-aqueous polar mobile phase, such as an acetone-acetonitrile mixture, has proved effective for the separation. Thus, the TTP complexes of Mg, VO, Ni, Cu, Zn, and Pd and also TTP free acid were successfully separated in about 10min on a Li-Chrosorb RP-18 column (7m, 250×4mm i.d.) with a 7030 (vol/vol) mixture of acetone and acetonitrile at a flow-rate of 1 mlmin^–1.     

Molecular exclusion chromatography in studies of the vanadium- and nickel-containing species in residual oil

A residual oil sample prepared from a crude oil is chromatographed on a column having a molecular-weight exclusion limit at about 5000. Three-dimensional chromatograms (absorbance/wavelength/time) are recorded with a u.v.-visible rapid-scanning detector. The elution profiles of vanadium- or nickel-containing species are obtained by applying atomic absorption spectrophotometry to fractions of the column effluents. Both vanadium- and nickel-containing species are detected over the whole molecular-weight range available with the column. The elution profiles of vanadium and nickel differ; the major elution peak for vanadium appears at a slightly lower molecular-weight region of the chromatogram than that for nickel. By reference to the real-time recorded absorption spectra of the effluents, it is suggested that at least some of the metals are present as metalloporphyrins.     

Dissolving metal reduction with crown ether — reductive decyanation

Toluene radical anion generated from potassium metal/dicyclohexano-18-crown-6/toluene system has been proved to be highly effective for reductive decyanation reaction of primary, secondary and tertiary cyanides.     

Intramolecular capture of pummerer reaction intermediates by an aromatic nucleophile: selective construction of 1,4-benzothiazine and indole ring systems

The simple alkyl sulfoxide 6 carrying two aromatic nucleophiles, when treated with trifluoroacetic anhydride at room temperature (Pummerer reaction conditions), underwent an intramolecular aromatic sulfenylation of the 6-exo-tet process in an exclusive manner to yield two regioisomeric 1,4-benzothiazine derivatives, 8 and 9. On the other hand, a similar reaction of the alpha-acyl sulfoxide 7, possessing identical aromatic nucleophiles, caused an intramolecular aromatic alkylation of the 5-exo-trig process to produce the 3-oxo-indole derivative 14 in a quantitative yield. These results demonstrate that the construction of 1,4-benzothiazine and indole ring systems can be achieved in a selective manner by proper choice of the sulfoxide side chain.     

A synthesis of heteroaromatic analogues of 1-methyl-1,2,3,4-tetrahydroisoquinoline using the Pummerer-type cyclization reaction: observation of tandem cyclization reaction

The sulfoxides 7b and 7d carrying thiophene or benzothiophene as heteroaromatic nucleophiles, when treated with trifluoroacetic anhydride at room temperature (Pummerer reaction), underwent an intramolecular alkylation in an exclusive manner to yield 4,5,6,7-tetrahydro-7-methyl-4-phenylsulfanylthieno[2,3-c]pyridine-6-carbaldehyde (10) and the corresponding benzothiophene derivative (12b) in high yields, respectively. Thus, this route provides biologically interesting nitrogen heterocycles (1b) and (2b). On the other hand, the sulfoxide (7c) carrying benzofuran as a nucleophile on reaction with TFAA yielded not only the Pummerer-type cyclization product (12a), but also the diastereoisomeric tandem cyclization products (13) and (14) having a noble 11-aza-2-oxa-7-thiatricyclo[4.3.3.0(1,5)]dodecane ring system (B). The formation of these products can be readily rationalized by the intervention of the oxonium ion intermediate (21).     

DELETEile chiral bidentate ligands derived from alpha-amino acids: synthetic applications and mechanistic considerations in the palladium-mediated asymmetric allylic substitutions

A new class of chiral amidine-phosphine hybrid ligands 7a,b, which are readily accessible from the corresponding alpha-amino acids, were developed. A versatility for construction of new ligands is desirable, by which a variety of reactions and substrates become applicable. Indeed, a variety of modifications, such as exchange reactions to other amino groups in the amidine skeleton and the production of other types of ligands, are possible using the precursor compounds of 7a. Thus, novel chiral ligands 7c,d, 8, 11, and 13, which provide sterically and electronically different chiral circumstances, were prepared and used for the palladium-mediated asymmetric allylic substitutions of both acyclic and cyclic compounds. In these reactions, high levels of asymmetric induction were achieved for both substrates. A marked advancement of reactivity and enantioselectivity in palladium-catalyzed asymmetric allylations of 1,3-diphenylpropen-2-yl pivalate 14a was attained by examination of electronic substituent effects in a new series of chiral P-N and S-N hybrid ligands 8 and 11. Mechanistic views concerning the enantiodiscriminating step were demonstrated, in which a good correlation between a novel Pr/Mr concept and the absolute configuration of allylation products are discussed for the prediction of enantioselecting direction. The use of ketene silyl acetals as nucleophiles was investigated and compared with the corresponding harder anionic carbon nucleophiles. The former nucleophiles afforded higher enantioselectivity in asymmetric allylic transformations of 14a.     

Reaction of α,β‐unsaturated ketones with cerium(IV) salts in alcohol

Reaction of α,β‐unsaturated ketones with cerium(IV) salts or lanthanide triflates in alcohols gave good yields of the corresponding β‐alkoxy compounds. In the case of 2‐cyclopentenone and 2‐cyclohexenone, the 1,1,3‐trialkoxy acetal derivatives were obtained preferentially accompanied by β‐alkoxyketone, except 2‐cycloheptenone. However, in the reaction of 2‐cycloheptenone with alcohol using cerium(IV) sulfate (CS)‐molecular sieve, 1,1,3‐trialkoxy derivatives were obtained. Also, in the cases of 1‐penten‐3‐one, 4‐hexen‐3‐one and 3‐hepten‐2‐one, 1,1,3‐trialkoxy derivatives were obtained preferentially. Copyright © 2006 John Wiley & Sons, Ltd.