WAXS study on orthorhombic crystalline phases in hot-drawn high density polyethylene: POLYMER CHARACTERISATION

The temperature dependence in the range 23–135°C of hot-drawn HDPE plates maintained free from contraction was investigated by WAXS and DSC. A specially designed cylindrical chamber was used for the WAXS patterns. The results confirm the coexistence of two populations of orthorhombic crystals which have different lattice and thermal behaviour. The crystal lattice parameter a shows expansion, while b exhibits expansion up to 90°C, followed by contraction as the temperature is raised to melting. On the other hand, the c parameter is practically constant.     

Atomistic Modeling of Silica Based Sol-Gel Processes

Density Functional Theory is used to study water, methanol, ethanol, TMOS, and TEOS molecules and the most important silica clusters participating in sol-gel processes. Calculated bond lengths, bond angles and electric dipole moments compare well with experimental data. The energy of these molecules is reported and used to discuss the energetics of the hydrolysis and condensation reactions. Molecular Dynamics is employed to simulate liquid water, methanol, ethanol, TMOS, TEOS and experimental sol-gel solutions. Calculated densities and enthalpies of vaporisation compare well with experimental data. Preliminary results are presented for MD simulations of sol-gel solutions.     

Uronic (hexenuronic) acid profile of ethanol–alkali delignification of giant reed Arundo donax L.

The effect of process variables on uronic acids (UAs) and hexenuronic acids (HexAs) in the annual crop Arundo donax L. during ethanol–alkali pulping has been examined. A substantial loss of UA moieties (up to 90%) was observed by the end of pulping (target kappa number 18) performed with 25% NaOH and 40% EtOH (by volume) within the temperature range of 130–150 °C. At the same time, the progressive formation of HexA in pulp was detected from the early phases of delignification. The proportion of HexA in the residual UA of the final pulp was found to be 84%, indicating almost complete conversion of 4-O-methylglucuronic acid side groups (MeGlcA) of heteroxylan into HexA. The kinetics of UA degradation and HexA formation has been described in terms of three consecutive first-order reaction stages. The overall rate of UA degradation was one order higher than the rate of UA conversion into HexA. The values of apparent activation energy were estimated as 68.6 and 94.7 kJ mol^–1, respectively. The reaction medium alkalinity was shown to be the controlling factor for UA and HexA stability during ethanol–alkali pulping. An increase in alkali charge from 5% to 35% (as NaOH) led to UA loss of 40%, but promoted HexA formation from 11.8 to 20.1 mol g^–1. The addition of organic solvent to the alkaline pulping solution had a similar effect, and about 10% of UA was lost and the content of HexA increased from 6.9 to 10.9 mol g^–1 with an increase in ethanol proportion in the liquor from 20% to 60%.     

A mild and efficient method for halogenation of 3,5-dimethyl pyrazoles by ultrasound irradiation using N-halosuccinimides

The 4-halo-3,5-dimethyl pyrazoles have been synthetisized in good yields in short reaction times in the absence of a catalyst by reaction of 3,5-dimethyl pyrazoles with N-halosuccinimides (NBS, NCS and NIS) under ultrasound irradiation. Finally, the halogenation of pyrazoles with Br₂, ICl and I₂ was showed in similar conditions.     

A new steroidal saponin from Agave attenuata

A new steroidal saponin was isolated from the leaves of Agave attenuata. Its structure was established as (3beta,beta,25S)-spirostan-3-yl O-beta-D-glucopyranosyl-(1 --> 2)-beta-D-glucopyranosyl-(1 --> 2)-O-[beta-D-glucopyranosyl-(1 --> 3)]-beta-D-glucopyranosyl-(1 --> 4)-beta-D-galactopyranoside. The structural identification was performed using detailed analyses of 1H- and 13C-NMR spectra including 2D NMR spectroscopic techniques (COSY, HETCOR, and COLOC) and chemical conversions. The hemolytic activity of the steroidal saponin was evaluated using an in vitro assay.     

Coordination of 2,2'-bipyridyl and 1,10-phenanthroline to yttrium and lanthanum complexes based on a scorpionate ligand

Reaction of yttrium and lanthanum trichloride with 1 equiv of sodium or potassium hydrotris(3,5-dimethylpyrazolyl)borate and 1 equiv of 2,2'-bipyridine gives good yields of the complexes [MCl(2)(Tp(Me2))(C(10)H(8)N(2))] (M = Y (1), La (2)). The analogous compounds with 1,10-phenanthroline, [MCl(2)(Tp(Me2))(C(12)H(8)N(2))] (M = Y (3), La (4)), have been obtained by a similar procedure. The solid-state structures of 2-4 were determined by single-crystal X-ray diffraction and revealed that the compounds are all seven-coordinate with capped octahedral geometry. In contrast, reaction of yttrium trichloride with 1 equiv of sodium hydrotris(3,5-dimethylpyrazolyl)borate in the presence of 1 equiv of neocuproine affords [YCl(3)(Tp(Me2))][Na(neoc)(3))] (5). Compounds 1 and 2 provide an entry for the synthesis of complexes containing the bipyridyl ligand in a radical anionic form or in a dianionic form. Reaction of 1 and 2 with an excess of sodium amalgam gives [Y(Tp(Me2))(bipy)(THF)(2)] (6) and [La(Tp(Me2))(2)(bipy)] (7), respectively. The structures of both compounds have been determined by X-ray crystallography. Compound 7 can be oxidized with iodine to give [La(Tp(Me2))(2)(bipy)]I (8).     

Optimization of acid hydrolysis of sugarcane bagasse and investigations on its fermentability for the production of xylitol by Candida guilliermondii

The dilute-acid hydrolysis of sugarcane bagasse was optimized using a statistical experimental design resulting in hydrolysates containing 57.25 g/L of xylose, which were fermented with a high inoculum concentration (10 g/L of the yeast Candida guilliermondii IM/UFRJ 50088). The addition of urea reduced the time of conversion (t _C) to 75 h (without nitrogen source addition t _C>127 h), and, consequently, improving the rates of xylitol bioproduction. Fermentator experiments, using the optimized conditions, resulted in enhanced conversion rates, reducing t _C to 30 h. The stability of the yeast in the hydrolysate was also verified in a 480-h cultivation.     

Synthesis and Characterization of Pyrrolthiosemicarbazone Complexes of Palladium(II). Crystal Structures of [{Pd[C4H4NC(H)=NNC(S)NHMe](Cl)}2{μ‐Ph2P(CH2)3PPh2}] and [Pd{C4H4NC(H)=NNC(S)NHMe}{Ph2P(CH2)2PPh2‐P,P}](Cl)

Reaction of the thiosemicarbazone ligands C₄H₄NC(H)=NN(H)C(S)NHR (R = Me, a ; Et, b ) with Li₂[PdCl₄] gave the dinuclear complexes [Pd{C₄H₄NC(H)=NNC(S)NHR}(μ‐Cl)]₂ (R = Me, 1a ; Et, 1b ) with a central Pd₂Cl₂ core and with deprotonation of the thiosemicarbazones at the hydrazinic nitrogen atom. Treatment of 1a and 1b with triphenylphosphine gave the mononuclear compounds [Pd{C₄H₄C(H)=NNC(S)NHR}(Cl)(PPh₃)] (R = Me, 2a ; Et, 2b ), whereas reaction of 1a and 1b with tertiary diphosphines gave mono‐ and dinuclear compounds, as appropriate, with the corresponding diphosphine acting as a monodentate ( 6b ), chelating ( 3a ) and bridging ligand ( 4a, 5a , 4b, 5b ). Treatment of 1a and 1b with (Ph₂PCH₂CH₂PPh₂)W(CO)₅ gave the new heterobimetallic complexes 7a and 7b . The crystal structures of complexes 3a and 4a are described.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.