Gas phase isomerization of \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 10}} {\rm H}_{{\rm 14}} } \right]_{}^{_.^ + } $\end{document} ions generated from adamantanoid compounds

\documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 10}} {\rm H}_{{\rm 14}} } \right]_{}^{_.^ + } $\end{document} ions have been generated from a number of adamantanoid compounds, both by ionization and ionization followed-by fragmentation. Metastable ion abundance ratios of competitive reactions indicate the decomposition of these ions from common structures in all cases.     

Elemental analysis of particulate matter in a metal workshop and of biological samples from exposed workers

During metal welding and cutting, large amounts of particulate matter (PM) are produced that might represent a significant health risk for the exposed workers. In the present pilot study, we performed an elemental analysis of fine PM collected in a metal workshop. Also, elemental analysis of the hair and nail samples collected from workers exposed to the workshop dust and control group was done. Concentrations of 15 elements in PM were measured with X‐Ray Fluorescence (XRF) and Particle Induced X‐ray Emission (PIXE), whereas inductively coupled plasma mass spectrometry (ICP‐MS) was used to determine 12 elements in hair and nail samples. Mean 8‐hr concentrations of PM_2.5, Fe, and Mn in the vicinity of welders were up to 1803, 860, and 30 μg/m³, respectively, whereas in the nearby city, daily PM_2.5 concentrations are on average 11 μg/m³. We found that several elements, especially Fe and Mn, had substantially higher concentrations in hair and nail samples of exposed workers than in the control group, which indicates the accumulation of metals in workers' tissues, although limit values were not exceeded.     

Effect of atmospheric pressure pulsed discharge spatial inhomogeneity on Ar I and H I lines: Electron number density study

The spatial inhomogeneity of pulsed atmospheric pressure discharge in argon is investigated using the electron number density N_e diagnostics procedure applied to asymmetrically broadened Ar I lines. A dedicated fitting procedure is used for describing Ar I 703.0 nm line shape recorded from argon gas discharge and H I (at 486.13 and 656.28 nm) lines recorded from Ar-H₂ gas mixture discharge. The results revealed the change in N_e in both axial and radial directions. The additional Ar I lines at 614.5, 710.7, 731.2, and 731.6 nm, recorded from integral spatial radiation, are analysed as well to confirm the results from the plasma column region. The possibility of using AlO (B²∑⁺–X²∑⁺) and CN (B²∑⁺–X²∑⁺) molecular bands for gas temperature T_g measurements in this type of gas discharge source is demonstrated and T_g used as an input parameter for the N_e diagnostics procedure. For the proper identification of molecular band spectral lines, the Fortrat parabolas are constructed. The results obtained from Ar I 703.0 nm line indicate three different N_e values, with N_e1 ≈ 0.6 × 10¹⁶ cm⁻³, N_e2 ≈ 3.6 × 10¹⁶ cm⁻³, and N_e3 ≈ 19 × 10¹⁶ cm⁻³ measured from the plasma column. These N_e values increase in the cathode and anode region.     

Cluster Categories Coming from Cyclic Posets

Cyclic posets are generalizations of cyclically ordered sets. In this article, we show that any cyclic poset gives rise to a Frobenius category over any discrete valuation ring R. The stable category of a Frobenius category is always triangulated and has a cluster structure in many cases. The continuous cluster categories of [14 Igusa , K. , Todorov , G. ( 2013 ). Continuous Frobenius categories . Proceedings of the Abel Symposium 2011 : 115 – 143 .[Crossref] , [Google Scholar]], the infinity-gon of [12 Holm , T. , Jøot rgensen , P. ( 2012 ). On a cluster category of infinite Dynkin type, and the relation to triangulations of the infinity-gon . Math. Z. 270 : 277 – 295 .[Crossref], [Web of Science ®] , [Google Scholar]], and the m-cluster category of type A _∞ (m ≥ 3) [13 Holm , T. , Jøot rgensen , P. ( 2015 ). Cluster tilting vs. weak cluster tilting in Dynkin type A infinity . Forum Math. 27 : 1117 – 1137 .[Crossref], [Web of Science ®] , [Google Scholar]] are examples of this construction as well as some new examples such as the cluster category of ?². An extension of this construction and further examples are given in [16 Igusa, K., Todorov, G. Continuous Cluster Categories of Type D. arXiv:1309.7409 . [Google Scholar]].     

Solvent Effects on the Structure-Activity Relationship of Phenytoin-like Anticonvulsant Drugs

The absorption spectra of nine compounds structurally related to phenytoin (5,5-diphenylhydantoin) were recorded in twelve solvents over the range of 200 to 400 nm. The effects of solvent dipolarity/polarizability and solvent/solute hydrogen bonding interactions were analyzed by means of the linear solvation energy relationship (LSER) concept proposed by Kamlet and Taft. The lipophilic activity of the investigated hydantoins was estimated by calculation of their log ₁₀ P values. The calculated values of log ₁₀ P were correlated with the ratio of the contributions of specific and non-specific solute/solvent interactions. The correlation equations were combined with the corresponding ED₅₀ values to generate new equations that demonstrate exact relationship between solute/solvent interactions and the structure-activity parameters.     

Toward the synthesis of incargranine B and seneciobipyrrolidine. Synthesis of octahydro-dipyrroloquinoline skeleton via dipolar cycloaddition/amination sequence

Octahydro-dipyrroloquinoline skeleton is the building component of a very few naturally occurring compounds. Nevertheless, these natural products have been attractive synthetic targets, and their study commanded development of efficient synthesis of this core. While the reported methods are based on the dimerization procedure of N-arylpyrrolidines of N-arylhomopropargyl amines, our approach relay on dipolar cycloaddition/amination sequence. This strategic approach allows sequential introduction of aromatic moieties increasing the product diversity and hence may be useful in further exploration of incargranine B or seneciobipyrrolidine derivatives.     

Use of Different Salt Solutions in Salting-Out TLC of Co(III) Complexes on Silica Gel

Saturated aqueous solutions of 28 different salts have been studied as a potential mobile phases for salting-out thin-layer chromatography, on silica gel, of a series of four mixed bis-aminocarboxylato cobalt(III) complexes. In addition, by linear regression analysis of chromatographic data obtained for fifteen mixed aminocarboxylato Co(III) complexes (four series) with solutions of ammonium chloride, three alkali metal chlorides, and four alkaline earth metal chlorides, four linear dependences previously established on different adsorbents with (NH₄)₂SO₄ solutions were confirmed. The qualities of the separations achieved with the salts were compared and Li⁺, Mg²⁺, and Ca²⁺ chlorides are proposed as the most suitable.     

Kinetic Spectrophotometric Determination of Chromium (VI) by Oxidation of Sodium Pyrogallol-5-sulphonate by Hydrogen Peroxide

Summary. A new selective, sensitive, and simple kinetic method is developed for the determination of trace amounts of chromium (VI). The method is based on the catalytic effect of Cr(VI) on the reaction of sodium pyrogallol-5-sulphonate (PS) with hydrogen peroxide. The reaction is followed spectrophotometrically by tracing the oxidation product at 437nm within 1min after addition of H₂O₂. The optimum reaction conditions are PS (1.32·10^–3mol·dm^–3), H₂O₂ (0.32mol·dm^–3), HClO₄ (2.6·10^–3mol·dm^–3) at 25°C. Following this procedure, chromium (VI) can be determined with a linear calibration graph up to 0.25ng·cm^–3 and a detection limit of 0.024ng·cm^–3, based on the 3 criterion. The interference effect of several species was also investigated and it was found that the most common cations and anions do not interfere with the determination. The developed procedure was successfully applied to the determination of Cr(VI) and total Cr in river waters and total Cr in herbal samples.     

Kinetic determination of trace levels of selenium(IV) and total selenium by Nile Blue A/hydrogen peroxide method

A kinetic method for the determination of selenium(IV) traces is proposed, based on its inhibitory action on the oxidation of Nile Blue A by hydrogen peroxide in phosphate buffer (pH 10.5). A linear dependence was established between the rate of the proposed indicator reaction and selenium concentration in the range 9.5 × 10^–2-1.58 ng cm^–3. The experimental conditions of maximal selenium effect were established. Selenium, determined by the tangent method, was determined at concentrations over the range 0.22–1.26 ng cm^–3, with relative standard deviations up to 4.5%. The reaction rate was followed spectrophotometrically. The effect of foreign ions on the accuracy of this method was also investigated. The method was applied to the determination of selenium in pharmaceutical preparations and wheat flour.     

The application of levulinic acid and 5-nitro-2-furylmethylene diacetate in the total synthesis of some novel biologically active (5-nitro-2-furyl)azomethines

Summary The syntheses andin vitro antibacterial and antifungal evaluation of certain (5-nitro-2-furyl)azomethines with different heterocyclic nuclei are described.

---

Die Anwendung von Lävulinsäure und 5-Nitro-2-furylmethylendiacetat in der Totalsynthese einiger neuer biologisch aktiver (5-Nitro-2-furyl)azomethine

Zusammenfassung Es wird die Synthese und diein-vitro-antibakterielle und antifungale Wirksamkeit für bestimmte (5-Nitro-2-furyl)azomethine mit verschiedenen heterocyclischen Kernen beschrieben.