Electrical behaviour of laser-damaged silicon photodiodes

A measurement of the electrical parameters degradation of Si photodiodes irradiated by laser visible light has been performed. The laser is a Q-switched Nd:YAG, frequency doubled, operated in single pulse mode of 4 ns duration. The applied fluence levels range up to 90 J/cm². Two kinds of irradiation process were applied: either a part of the detector active area was irradiated in single pulse mode, or a scanning of the whole detector active area was performed with successive identical pulses. It has been shown that the fluence necessary to induce significant changes (local decrease of 35%) in responsivity is several times the surface melting threshold fluence (0.5 J/cm²). Conversely, the dark current is the most sensitive parameter, increasing by about four times for high irradiation. The in-depth dopant distribution is altered by high fluence irradiation in a way that cannot be explained by simple thermal modelling.     

(23)Na multiple-quantum MAS NMR of the perovskites NaNbO(3) and NaTaO(3)

The distorted perovskites NaTaO(3) and NaNbO(3) have been studied using (23)Na multiple-quantum (MQ) MAS NMR. NaTaO(3) was prepared by high temperature solid state synthesis and the NMR spectra are consistent with the expected room temperature structure of the material (space group Pbnm), with a single crystallographic sodium site. Two samples of NaNbO(3) were studied. The first, a commercially available sample which was annealed at 900 degrees C, showed two crystallographic sodium sites, as expected for the room temperature structure of the material (space group Pbcm). The second sample, prepared by a low temperature hydrothermal method, showed the presence of four sodium sites, two of which match the expected room temperature structure and the second pair, another polymorph of the material (space group P21ma). This is consistent with powder X-ray diffraction data which showed weak extra peaks which can be accounted for by the presence of this second polymorph. Density functional theory (DFT) calculations support our conclusions, and aid assignment of the NMR spectra. Finally, we discuss the measured NMR parameters in relation to other studies of sodium in high coordination sites in the solid state.     

The changing of the guard: Molecular diversity and rapid evolution of β-defensins

Summary Defensins are small cationic peptides involved in innate immunity and are components of the first line of defence against invading pathogens. β-defensins are a subgroup of the defensin family that display a particular cysteine spacing and pattern of intramolecular bonding. These molecules are produced mostly by epithelia lining exposed surfaces and appear to have both antimicrobial and cell signalling functions. The unusually high degree of sequence variation in the mature peptide produced by the paralogous and in some cases orthologous genes implies extensive specialisation and species specific adaptation. Here we review recent functional data that are an important addition to our knowledge of the innate immune response and novel antibiotic design. We also consider the organisation and evolution of the genomic loci harbouring these genes where radical and rapid changes in β-defensin sequences have been shown to result from the interplay of both positive and negative selection. Consequently these genes provide some unusually clear glimpses of the processes of duplication and specialisation that have shaped the mammalian genome.     

Nematic and Cholesteric PDLC Elaborated under Shear Stress

Abstract

The properties of nematic and cholesteric Polymer Dispersed Liquid Crystal (PDLC) with ellipsoidal droplets are reported. The shape of the droplets are modified by a shear stress during the preparation. Different values of the shear stress were used which permit an ellipticity ratio modification by a factor 10. The electro-optical properties are measured for different types of samples and compared with theoretical previsions: transmission or reflection under voltage, threshold voltage, response times. We also describe the preparation of the sample, the experimental apparatus used for the shear stress, and the expected theoretical quantities like response times. When the liquid crystals are nematics, we obtain an increase of the threshold voltages, as predicted. The relaxation time decreases with increasing deformation but the diminution is not as great as predicted. When the liquid crystals are cholesterics, the high deformations induce polygonal fields, which strongly modify the electro-optical properties of the micro-composite. The threshold voltages and response time at applied voltage decrease whereas the relaxation time is increasing.     

Controlled transport and focusing of laser-accelerated protons with miniature magnetic devices

This Letter demonstrates the transporting and focusing of laser-accelerated 14 MeV protons by permanent magnet miniature quadrupole lenses providing field gradients of up to 500 T/m. The approach is highly reproducible and predictable, leading to a focal spot of (286 x 173) microm full width at half maximum 50 cm behind the source. It decouples the relativistic laser-proton acceleration from the beam transport, paving the way to optimize both separately. The collimation and the subsequent energy selection obtained are perfectly applicable for upcoming high-energy, high-repetition rate laser systems.     

Einen R?hrenofen

Ohne Zusammenfassung     

Sur une combinaison borotartrique et son application à la recherche et au dosage microchimiques de l'ion borique

Summary In the presence of tartaric acid, borate reacts with barium to produce a precipitate of constant composition and very low water-solubility. The analysis of this presumably complex barium borotartrate yields to empirical formula Ba₅B₂C₁₂H₈O₂₄ · 4 H₂O. The qualitative detection of boron by means of this characteristic precipitate has a limiting concentration of 10^–5. A method is described for the gravimetric determination of boron on the semimicro scale, and also a volumetric method for the micro-determination of boron, which employs the iodometric measurement of barium as chromate, where 1 ml of 0,01 N thiosulfate solution corresponds to 14,4 B. The principle of this method can be also applied to complex inorganic, organic or biological solutions, after ashing.

---

Zusammenfassung Bei Gegenwart von Weinsäure läßt sich Borat mit Barium in Form eines Niederschlages konstanter Zusammensetzung (wahrscheinlich als komplexes Bariumborotartrat) und sehr geringer Wasserlöslichkeit fällen, dessen Analyse der Formel Ba₅B₂C₁₂H₈O₂₄ · 4 H₂O entspricht. Der qualitative Bornachweis ist mit Hilfe dieser charakteristisch geformten Fällung bis zu einer Grenzkonzentration von 10^–5 zu führen. Ein Verfahren zur gravimetrischen Borbestimmung im Halbmikromaßstab und eine Methode zur volumetrischen Mikrobestimmung des Bors über die jodometrische Erfassung des Bariums als Chromat wird angegeben, wobei 1 ml 0,01-n-Thiosulfatlösung 14,4 B entspricht. Das Prinzip dieser Methode läßt sich auch auf komplexe anorganische, organische bzw. biologische Lösungen nach deren Veraschung anwenden.

---

---

Avec 1 figure.     

Detection of pathogenic Staphylococcus aureus bacteria by gold based immunosensors

We describe the elaboration of ultra-sensitive immunosensors, to detect the bacterial pathogen Staphylococcus aureus. We utilized commercially available polyclonal anti-S. aureus antibody as receptor. Immunosensors were elaborated by building a self-assembled monolayer (SAM) of thiolamine onto planar gold-coated sensor chips. Then, Protein A was covalently linked to the thiolated SAM using glutaraldehyde as cross-linking agent. After a blocking step by Bovine Serum Albumin (BSA), the antibody was immobilized by affinity to Protein A. This step-by-step construction was monitored by Polarization Modulation Reflection Absorption Infrared Spectroscopy (PM-RAIRS) and Quartz Crystal Microbalance with Dissipation (QCM-D). In a first stage, the parameters of immunosensor elaboration were optimized using a model rabbit IgG. The accessibility of receptors and the homogeneity of their distribution were checked by PM-RAIRS, QCM-D, and by immuno-gold scanning electron microscopy. Then, the specific rabbit anti-S. aureus antibody was immobilized and the resulting sensing layer was applied to the detection of the pathogen target. Independent detection of bacteria immobilized on the sensors by fluorescent imaging allowed validation of the specificity of recognition toward the pathogen as well as a quantitative response of the sensor. Using PM-RAIRS as transducing technique allowed us to enhance sensitivity and reach a very competitive detection level (10⁵ CFU mL^?1).     

Pickering emulsions with stimulable particles: from highly- to weakly-covered interfaces

We study oil-in-water emulsions stabilised by pH-sensitive colloidal silica or latex particles. Depending on the composition of the continuous phase, the same type of particles and the same emulsification process lead to emulsions characterised either by large drops densely covered by the particles, or to small droplets which are weakly covered. The two kinetically stable states can be tuned reversibly by using pH or salinity as compositional stimuli. We examine the emulsions' behaviour in these two limiting cases and we discuss the possible mechanisms allowing stabilisation, especially in the case of low surface coverage.