A new multichannel time reversal focusing method for circumferential Lamb waves and its applications for defect detection in thick-walled pipe with large-diameter

This paper proposes a new multichannel time reversal focusing (MTRF) method for circumferential Lamb waves which is based on modified time reversal algorithm and applies this method for detecting different kinds of defects in thick-walled pipe with large-diameter. The principle of time reversal of circumferential Lamb waves in pipe is presented along with the influence from multiple guided wave modes and propagation paths. Experimental study is carried out in a thick-walled and large-diameter pipe with three artificial defects, namely two axial notches on its inner and outer surface respectively, and a corrosion-like defect on its outer surface. By using the proposed MTRF method, the multichannel signals focus at the defects, leading to the amplitude improvement of the defect scattered signal. Besides, another energy focus arises in the direct signal due to the partial compensation of dispersion and multimode of circumferential Lamb waves, alongside the multichannel focusing, during MTRF process. By taking the direct focus as a time base, accurate defect localization is implemented. Secondly, a new phenomenon is exhibited in this paper that defect scattered wave packet appears just before the right boundary of truncation window after time reversal, and to which two feasible explanations are given. Moreover, this phenomenon can be used as the theoretical basis in the determination of defect scattered waves in time reversal response signal. At last, in order to detect defects without prior knowing their exact position, a large-range truncation window is used in the proposed method. As a result, the experimental operation of MTRF method is simplified and defect detection and localization are well accomplished.     

Novel Quantum Virtual Private Network Scheme for PON via Quantum Secure Direct Communication

Two quantum secure direct communication (QSDC) protocols with quantum identification (QI) based on passive optical network (PON) architecture are proposed. One QSDC protocol can be implemented between two different optical network units just with simple configurations of PON by optical line terminal when they are in the same virtual private network after optical line terminal performing QI to the optical network units in the given PON architecture. The other QSDC protocol is also implemented between any two legitimated users in the virtual private network but with considerable reduction of workload of the optical line terminal. The security analysis shows that the proposed QSDC schemes with quantum identification are unconditionally secure and allow the legitimate users to exchange their secret information efficiently and to realize a quantum virtual private network in the PON networks ultimately.     

分光光度法测定古代青铜器铅提取液中的微量铅

根据古代青铜器铅提取液的性质及质谱仪对样品的要求,对国标中双硫腙分光光度法测铅进行改进,选用具塞试管代替分液漏斗,取消掩蔽剂,减少原溶液用量,结果表明该方法操作简便,校准曲线在较大铅浓度范围内线性较好,完全满足质谱测试前铅含量测定要求。     

自由基分子NH2υ2带CO激光磁共振σ谱的观测

采用高灵敏度,高分辨率激光磁共振光谱(LMR)方法在6μm谱段测量了自由基分子NH₂υ₂带的σ谱(△M_J=±1)。重复了前人已测过的谱,结果与之较好符合。并观测到了新谱,在14支激光谱线下共获得约115支塞曼(Zeeman)跃迁谱线,其中在6支激光谱线下新测得的谱线91支。     

软x射线近贴显微技术

软x射线近贴显微技术不但可使活的生物样品成象,分辨率高于光学显微镜,而且人为的样品准备程序在该技术中都可避免。本文描述了用高功率激光打靶产生的等离子体作为软x射线源而进行的近贴显微研究,并得到了分辨率好于1μm的结果。     

荧光素单磷酸酯的合成和其应用于荧光光度法测定酸性磷酸酯酶

本文新合成了荧光素单磷酸酯,通过元素分析、红外、热谱确定了其结构,探讨了其生成机理,并将其应用到酸性磷酸酯的荧光分析,深入研究了它与酸性磷酸酯酶之间反应的条件、检测此酶的线性范围、检测限和米氏常效.     

闪光X射线高速摄影荧光转换屏的设计和性质研究

本文描述了用于中间弹道高速摄影荧光转换屏的设计特点、性能测试和实验结果。文中讨论了Gd2O2S:Tb和(Zn,Cd)S对X射线的吸收系数、发光效率以及荧光光谱与变象管S-20阴极光谱灵敏度曲线相匹配的相关曲线;测试了转换屏的相对发光强度、分辨率及其余辉。实验证明本屏发光亮度比钨酸钙屏高60倍左右,屏分辩率达51p/mm,余辉时间为8μs,多幅摄影结果证明第一幅的图象对第二幅照片无“拖尾”现象,本屏已达到了中间弹道高速摄影转换屏的实用水平。     

Development of a portable and fast wire tension measurement system for MWPC construction

In a multi-wire proportional chamber detector(MWPC), the anode and signal wires must maintain suitable tension, which is very important for the detector's stable and accurate performance. As a result, wire tension control and measurement is essential in MWPC construction. A high pressure3 He MWPC detector is to be used as the thermal neutron detector of the multi-functional reflectometer at China Spallation Neutron Source, and in the construction of the detector, we have developed a wire tension measurement system. This system is accurate,portable and time-saving. With it, the wire tension on an anode wire plane has been tested. The measurement results show that the wire tension control techniques used in detector manufacture are reliable.     

集体噪声信道上带身份认证的无信息泄露的量子对话协议

在集体噪声条件下提出三个带身份认证的量子对话协议,两个量子对话协议分别用于抵抗集体消相干噪声和集体旋转噪声,另一个用于同时抵抗这两种集体噪声.通信双方通过广义幺正变换将自己的秘密信息编码到量子态中;并根据自己的秘密信息和携带秘密信息的粒子的初末两量子态,便可推知对方的秘密信息实现量子对话.协议的效率、安全性和无信息泄露等性能分析表明了协议的有效性.