基于金刚石色心自旋磁共振效应的微位移测量方法

基于压电陶瓷精密微位移系统的扫描探测技术是目前精密测量仪器进行微纳区域/结构性能测试的核心系统,但压电陶瓷材料存在迟滞、非线性问题,限制了对微位移分辨能力的提升.本文以金刚石氮空位色心为敏感单元,利用电子自旋效应对磁场强度的高分辨敏感机理,结合永磁体周围不同位置对应的磁场强度变化关系,提出了一种基于金刚石氮空位色心电子自旋敏感机理的微位移检测方法.通过建立电子自旋效应与微位移的关联模型,搭建了相应的微位移测量系统.经实验验证,该系统对微位移测试的灵敏度为16.67 V/mm,检测分辨率达到60 nm,实现了对微位移的高分辨率测量.并通过理论分析,该系统的微位移测量分辨率可进一步提升至亚纳米级水平,为新型微位移测量技术提供了发展方向和研究思路.     

激光打靶过程中的电磁脉冲特性

为诊断激光打靶产生的电磁脉冲信号分布,选取环天线作为主要电磁脉冲信号采集装置,对靶室内外信号同时进行测试。从天线设计制作到天线标定,描述了脉冲诊断系统的搭建。通过对信号进行采集及处理,对比分析了靶室外、法兰口及靶室内脉冲信号的频域特性和强度。得出靶室内受到电磁脉冲辐射强度最大且频谱分布最广,其次是法兰口,靶室外电磁脉冲信号最弱。总结多次激光打靶电磁脉冲信号频域分布,可看出波峰主要出现在0.5,1.2,3 GHz。电磁脉冲时域结果规律性展示出脉冲持续约100 ns,因靶室内回波振荡,电磁脉冲信号于几ns处及几十ns处有较明显峰值蔟。     

平面和曲面光学零件气囊抛光材料去除的比较研究

气囊数控抛光是近年来一种新兴的先进光学制造技术,采用柔性的气囊作为抛光工具并以进动的方式进行加工。首先简要阐述了气囊抛光的抛光原理,然后针对平面和曲面光学零件,在自行研制的气囊抛光实验样机上进行了抛光实验。被抛光光学元件的材料去除是在抛光区内实现的。研究了进动角、气囊压缩量、气囊内部压力、气囊转速、抛光时间以及工件的曲率半径几种重要的工艺参数对平面工件和球面工件抛光接触区大小和形状影响情况的异同。在此基础上,总结了气囊抛光材料去除的影响规律。给出了几种重要工艺参数在平面工件和球面工件上取值范围。     

Finite element modeling of acoustic scattering from an encapsulated microbubble near rigid boundary

This article proposes a finite element model (FEM) for predicting the acoustic scattering from an encapsulated microbubble near rigid boundary. The validity of the model is first examined by comparing the acoustic nonlinear response of a free microbubble with that obtained by the Church model. Then this model is used to investigate the effect of the rigid boundary on acoustic scattering signals from microbubble. The results indicate that the resonance frequency decreases while the oscillation amplitude increases as the microbubble approaches the rigid boundary. In addition, the fundamental component of the acoustic scattering signal is enhanced compared with that of the free microbubble.     

Efficient phosphorescent polymer light-emitting diodes by suppressing triplet energy back transfer

Phosphorescent polymer light-emitting diodes (PhPLEDs) are promising devices in flat panel displays and solid state lighting sources since they can combine the advantages of the high efficiency of electrophosphorescence and low-cost, large-scale manufacture by using a solution process. However, their efficiencies are generally much lower than those of small-molecule-based devices fabricated by using a thermal deposition approach. One of the major reasons for their low efficiency is that energy is lost by back transfer to a polymer host. This tutorial review gives a brief introduction to the fundamentals of PhPLEDs, and then highlights recent progress in the main approaches to suppress triplet energy back transfer from the phosphor to the polymer host towards realizing highly efficient PhPLEDs. The suppressing mechanisms are discussed, and the achievement of high device efficiencies are demonstrated. Emphasis is placed on the relationships between molecular structure, the extent of suppressing triplet energy back transfer, and device performance.     

Tokamak中自举电流的剖面准直性

利用Harris模型,通过求解等离子体平衡方程,计算俘获粒子份额,分别对常规剪切和中心负剪切下tokamak中的自举电流的大小和剖面准直性进行了计算和分析.自举电流分布与等离子体平衡电流分布之间的剖面准直性可以通过调整等离子体的密度、温度和电流分布参数,以及描述等离子体形状的拉长度k和三角变形因子d来获得.中心负剪切位形有利于自举电流产生,并有好的剖面准直性.通过计算比较,分别在常规剪切位形下和中心负剪切位形下获得了一组优化的等离子体参数,在这组参数下,自举电流有较大的份额和好的剖面准直性 关键词： tokamak 自举电流 剖面准直性     

Polarization-dependent carrier dynamics in a passive InAs/InP quantum dot waveguide

We investigate carrier dynamics in a passive InAs/InP quantum dot (QD) waveguide using 255 fs optical pulses at a central wavelength of 1568 nm. We observe strong anisotropy of absorption saturation for different polarizations. Pump-probe measurements indicate the presence of carrier relaxation dynamics on a timescale in the order of tens of picoseconds due to cascaded relaxation of carriers generated by two-photon absorption (TPA) from the bulk region to the QDs via the wetting layer. These relaxation timescales are much longer than in QD amplifiers. Our observations are supported by a rate-equation model which includes TPA, showing good agreement with the pump-probe measurements.     

Quantum Windowed Fourier Transform and its Application to Quantum Signal Processing

International Journal of Theoretical Physics - In classical information processing, the windowed Fourier transform (WFT), or short-time Fourier transform, which is a variant of the Fourier...     

Facile Synthesis of Hierarchical Nanosized Single‐Crystal Aluminophosphate Molecular Sieves from Highly Homogeneous and Concentrated Precursors

The synthesis of hierarchical nanosized zeolite materials without growth modifiers and mesoporogens remains a substantial challenge. Herein, we report a general synthetic approach to produce hierarchical nanosized single‐crystal aluminophosphate molecular sieves by preparing highly homogeneous and concentrated precursors and heating at elevated temperatures. Accordingly, aluminophosphate zeotypes of LTA (8‐rings), AEL (10‐rings), AFI (12‐rings), and ‐CLO (20‐rings) topologies, ranging from small to extra‐large pores, were synthesized. These materials show exceptional properties, including small crystallites (30–150 nm), good monodispersity, abundant mesopores, and excellent thermal stability. A time‐dependent study revealed a non‐classical crystallization pathway by particle attachment. This work opens a new avenue for the development of hierarchical nanosized zeolite materials and understanding their crystallization mechanism.     

一种基于两块PEM调制器的光谱测量方法

弹光调制干涉信号范围为百赫兹到数十吉赫兹之间,而由于探测器阵列无法对该等级频率实现有效响应,因此,该情况使弹光调制器在光谱成像工作中受到限制。为了解决该问题,发展了一种使用两块具有相近谐振频率的PEM,并基于该频率差进行光信号调制的方法。该方法将两个弹光调制器分别工作在数值略有差异的频率f₁和f₂上,被测光通过双弹光调制器实现差频调制,因此干涉信号中产生载有被测光的低频调制分量,低频调制频率是以δ_i(σ,t)=δ_0i(σ)sin(ω_it)为基频的一系列倍频信号,该低频调制信号使用普通探测器即可实现探测,再将直流和高频信号滤波后,仅对调制信号后的低频成分进行对应的运算即可得到被测光谱。由于该频率差比所使用PEM的谐振频率低2至3个数量级,因此,该方法可使探测器获得更多的响应时间,而且由于该方法并不需要所使用的两块PEM具有严格一致的谐振频率和相同的光程差,降低了系统本身的设计难度。