Glass/PDMS hybrid microfluidic device integrating vertically aligned SWCNTs to ultrasensitive electrochemical determinations

This communication reports a promising platform for rapid, simple, direct, and ultrasensitive determination of serotonin. The method is related to integration of vertically aligned single-walled carbon nanotubes (SWCNTs) in electrochemical microfluidic devices. The required microfabrication protocol is simple and fast. In addition, the nanomaterial influenced remarkably the obtained limit-of-detection (LOD) values. Our system achieved a LOD of 0.2 nmol L(-1) for serotonin, to the best of our knowledge one of the lowest values reported in the literature.     

Confronting the MSSM and the NMSSM with the discovery of a signal in the two photon channel at the LHC

We confront the discovery of a boson decaying into two photons, as reported recently by ATLAS and CMS, with the corresponding predictions in the Minimal Supersymmetric Standard Model (MSSM) and the Next-to-Minimal Supersymmetric Standard Model (NMSSM). We perform a scan over the relevant regions of parameter space in both models and evaluate the MSSM and NMSSM predictions for the dominant Higgs production channel and the photon–photon decay channel. Taking into account the experimental constraints from previous direct searches, flavor physics, electroweak measurements as well as theoretical considerations, we find that a Higgs signal in the two photon channel with a rate equal to, or above, the SM prediction is viable over the full mass range 123?M _H ?127 GeV, both in the MSSM and the NMSSM. We find that besides the interpretation of a possible signal at about 125 GeV in terms of the lightest $\mathcal {CP}$ -even Higgs boson, both the MSSM and the NMSSM permit also a viable interpretation where an observed state at about 125 GeV would correspond to the second-lightest $\mathcal {CP}$ -even Higgs boson in the spectrum, which would be accompanied by another light Higgs with suppressed couplings to W and Z bosons. We find that a significant enhancement of the γγ rate, compatible with the signal strengths observed by ATLAS and CMS, is possible in both the MSSM and the NMSSM, and we analyse in detail different mechanisms in the two models that can give rise to such an enhancement. We briefly discuss also our predictions in the two models for the production and subsequent decay into two photons of a $\mathcal {CP}$ -odd Higgs boson.     

Comparison of quantum,semi-classical and classical methods in the calculation of nitrogen self-broadened linewidths

We perform dynamical calculations on two robust N₂–N₂ potential energy surfaces in order to intercompare pressure broadening coefficients derived from close coupling and coupled states quantum dynamical methods, the semi-classical model of Robert and Bonamy and a full classical method. The coupled states and full classical results compare well with the experimental results or with close coupling values when available. This study confirms that the classical method is a good alternative at room and high temperatures to quantum dynamical methods. The results obtained using the semi-classical method however deviate from the other sets of data at all temperatures considered here (77–2400 K).     

Implementation of a genetically tuned neural platform in optimizing fluorescence from receptor-ligand binding interactions on microchips

This paper describes the use of a genetically tuned neural network platform to optimize the fluorescence realized upon binding 5-carboxyfluorescein-D-Ala-D-Ala-D-Ala (5-FAM-(D-Ala)(3) ) (1) to the antibiotic teicoplanin from Actinoplanes teichomyceticus electrostatically attached to a microfluidic channel originally modified with 3-aminopropyltriethoxysilane. Here, three parameters: (i) the length of time teicoplanin was in the microchannel; (ii) the length of time 1 was in the microchannel, thereby, in equilibrium with teicoplanin, and; (iii) the amount of time buffer was flushed through the microchannel to wash out any unbound 1 remaining in the channel, are examined at a constant concentration of 1, with neural network methodology applied to optimize fluorescence. Optimal neural structure provided a best fit model, both for the training set (r(2) = 0.985) and testing set (r(2) = 0.967) data. Simulated results were experimentally validated demonstrating efficiency of the neural network approach and proved superior to the use of multiple linear regression and neural networks using standard back propagation.     

Effect of Crystallization Kinetics on Microstructure and Charge Transport of Polythiophenes

We have examined the effects of crystallization kinetics of poly(3‐hexylthiophene) and poly[2,5‐bis(3‐hexadecylthiophen‐2‐yl)thieno(3,2‐b)thiophene] on microstructure and charge transport. Rapid crystallization increases the density of tie molecules in polythiophenes. As a consequence, ordered regions are better connected resulting in higher charge carrier mobilities. Our results suggest that controlling the crystallization kinetics might be an important factor for maximizing the charge mobility in semicrystalline polythiophene thin films.     

Grafting of amphiphilic block copolymers on lignocellulosic materials via SI‐AGET‐ATRP

Functionalizing biosourced materials is a major topic in the field of materials science. In particular, grafting polymerization techniques have been employed to change the surface properties of various substrates. Here, we report on the grafting of amphiphilic block copolymers in lignocellulosic materials using surface‐initiated activators generated by electron transfer atomic transfer radical polymerization (SI‐AGET‐ATRP). With this modification, it is possible to combine the interesting properties (anisotropy and high mechanical stability) of lightweight lignocellulosic materials, such as wood, with the special properties of the grafted block copolymers. Hydroxyl groups on wood cell wall biopolymers were used for the chemical bonding of an alkyl bromide as the initiator for AGET‐SI‐ATRP of a highly hydrophilic monomer ([2‐(methacryloyloxy)ethyl]trimethylammonium chloride) and a highly hydrophobic fluorinated monomer (2,2,3,3,4,4,5,5‐octafluoropentyl methacrylate). The successful grafting of homopolymers and block copolymers onto the wood structure was confirmed through Fourier transform infrared and Raman spectroscopy. The functionalization with the two homopolymers yielded lignocellulosic materials with opposite wettabilities, whereas by the adjustment of the ratio between the two copolymer blocks, it was possible to tune the wettability between these two extremes. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 885–897     

Low temperature specific heat of dense kondo ferromagnets and intermediate valence CeNixPtt-x compounds

Specific heat measurements performed in the temperature range 1.5 to 30 K in the compounds CeNi_xPt_{1 - x} with x = 0.5, 0.8 and 0.95 are presented. The analysis of the magnetic entropy enhances the results obtained previously by magnetic measurements: i) the reduction of the cerium moment due to the Kondo effect; ii) the increase of the importance of the Kondo effect in competition with the RKKY interactions when Pt is replaced by Ni. The variation of γ along the series indicates a maximum around x = 0.9 which corresponds to the magnetic instability. It is worth noting that below T_c in the ferromagnetic compounds, C_mag follows a T law, characteristic of magnon dispersion.     

Instabilité d'une nappe de vorticité étirée instationnaireInstability of an unsteady stretched vortex layer

We consider how the Kelvin–Helmholtz instability is affected by an external hyperbolic strain flow. The basic flow being unsteady, the inviscid evolution of perturbations is studied within the framework of a non-normal analysis in which the maximum amplification is computed for any given time. A positive or negative stretching is shown to enhance or reduce, respectively, the instability even for weak stretching rates. To cite this article: T. Gomez, M. Rossi, C. R. Mecanique 331 (2003).     

连续波锁模Pr3+:YLF激光器

本文报导了采用氩离子激光器来泵浦Pr³⁺:YLF晶体,应用声光调制器实现了主动锁模;同时应用振动─高反射平面镜也实现了被动锁模,两种锁模均得到了ps光脉冲.据作者了解这是这种晶体材料的第一次锁模运转.