Simplicity of stable principal sheaves

Let M be a compact connected Kähler manifold, and let Gbe a connected complex reductive linear algebraic group. Weprove that a principal G-sheaf on M admits an admissible Einstein–Hermitianconnection if and only if the principal G-sheaf is polystable.Using this it is shown that the holomorphic sections of theadjoint vector bundle of a stable principal G-sheaf on M aregiven by the center of the Lie algebra of G. The Bogomolov inequalityis shown to be valid for polystable principal G-sheaves.     

Projective indecomposable modules over the small quantum osp(1|2)

In this paper, we construct the finite dimensional Hopf superalgebra u _q (osp(1|2)) arising from U _q(osp(1|2)) when q is a root of unity and describe the projective objects and the irreducible morphisms in a category of Z-graded u _q (osp(l|2))-modules.     

Validation of HNO3 spectroscopic parameters using atmospheric absorption and emission measurements

The improved database of HNO₃ spectroscopic parameters in the 600–950 cm^?1 spectral region presented in [Gomez L, Tran H, Perrin A, Gamache RR, Laraia A, Orphal J, et al. Some improvements of the HNO₃ spectroscopic parameters in the spectral region from 600 to 950 cm^?1. JQSRT 2008, in press] is tested by comparisons between calculations and atmospheric remotely sensed absorption and emission spectra. The line parameters in the 11.3 μm region are validated using ground-based Fourier transform solar absorption measurements, whereas those in the 13.1 μm region are successfully tested using balloon-borne atmospheric emission spectra. In both regions, the quality of the line parameters and the consistency between band intensities is confirmed through comparisons with emission spectra collected by the satellite-borne MIPAS instrument.     

Photocatalytic Activity in the 2,4-Dinitroaniline Decomposition Over TiO2 Sol-Gel Derived Catalysts

Titania was prepared by the sol-gel method from titanium alkoxide. Depending on the pH of the gelling solution, specific surface areas between 88 and 10 m²/g were obtained. The band gap (E _g) of the samples was found between 3.05 and 3.32 eV. In samples gelled at pH5 and 9 and calcined at 400°C only anatase phase is observed, while for pH3 and pH7 brookite, anatase and rutile or anatase-rutile phases coexist. It was found that the photoactivity in the 2,4-dinitroanailine decomposition depends on the E _g and on the crystalline phases. The highest activity corresponds to the catalysts having the lowest E _g and more than one crystalline phases co-existing.     

Creatinine determination in urine samples by batchwise kinetic procedure and flow injection analysis using the Jaffé reaction: chemometric study

The classical Jaffé reaction for the determination of creatinine in urine samples is tested. A comparative study of the main analytical characteristics focussed to minimize the bias error and improve the precision, for the batchwise and flow injection (FI) methods is realized. Also, the effect of the albumin concentration in the determination of creatinine has been studied. Different analytical signals were studied. Absorbance increments at different times permit to estimate the creatinine concentration free from bias error in urine by the batchwise method using the calibration graph obtained with creatinine standards and no measurement of the blank solution is needed. The lineal interval was 0.92–50 mg l⁻¹ and seven samples can be processed per hour by an operator. No previous treatment of the urine sample is necessary. The FI method provides also good results. The lineal interval was 30–100 mg l⁻¹ and the sample rate was around 20 samples per hour. If increased albumin levels are detected in the urine, standard addition method or the calibration graphs with standards in presence of albumin are needed in order to obtain accurate results when FI method is employed. The obtained accuracy of the both methods allows its application as diagnostic tool to establish the urinary creatinine levels.     

Static and dynamic behavior of concrete and granite in tension with damage

A series of dynamic and static tensile-splitting experiments were performed on concrete and granite specimens to investigate the effect of induced damage on their tensile strength. These experiments were performed as part of a larger effort investigating the penetration process into the two materials. The strain rate each specimen was subjected to remained constant for these experiments, while the level of induced damage was increased. Damage was induced into the specimens through repeated drop-weight impacts and quantified using a statistical technique. The dynamic splitting experiments were performed using a split Hopkinson pressure bar (SHPB), while the static splitting experiments were conducted per the ASTM standard procedures D3967 and C496. As part of the investigation, photoelastic dynamic tensile-splitting experiments were also performed to establish the validity of using static relations for the determination of dynamic tensile strength. The experiments showed that the static splitting strength was highly dependent on the orientation of the induced damage with regard to the applied loading; however the dynamic tensile strength decreased with increasing damage with no apparent dependency on the random damage orientation. Photoelastic experiments have shown that the mechanism of failure changes for the dynamically tested damaged specimens, reducing their dependence on damage orientation.     

pH值对水热合成磷酸铋的光催化性能的影响

利用水热法通过调节溶液的pH值合成了不同物相和形貌的磷酸铋.用X射线衍射仪(XRD)和扫描电子显微镜(SEM)对样品进行了物相和形貌表征,并以10 mg·L-1的亚甲基蓝溶液为目标降解物,对材料的光催化降解性能进行了评价.结果表明:前驱物溶液的pH值对磷酸铋的形貌、物相和光催化性能都有较大影响.前驱物溶液pH值为1.3时制得的磷酸铋的光催化性能最高,室温汞灯照射20 min,亚甲基蓝的降解率可达到99.61;.     

利用卟啉中位羧基基团直接缩合卟啉二聚体

卟啉单体的直接偶合法. 这种方法包括有β-β, meso-β直接连接的二聚体[8,9]和直接连接的N混杂的卟啉二聚体[10]. 我们利用二环己烷基羰化二亚胺(DCC)作催化剂, 在冰盐浴条件下, 通过两个5-(p-羧基苯基)-10,15,20-三苯基卟啉(H2CPTPP)周边上的羧酸基团一步直接缩合获得以羧酸酐连接的新型卟啉二聚体. 利用多种光谱手段证实所合成的物质为目标产物. 该方法具有反应物单一、 反应步骤简单、 副反应少、 产物纯化方便、 时间短和产率高等优点.     

一种新型可光降解的PVC-OA-TiO_2纳米复合膜

采用包埋技术制备了一种新型可光降解的聚氯乙烯-草酸-TiO_2(PVC-OA-TiO_2)纳米复合膜,并研究了紫外光照射条件下该复合膜的光催化降解情况.结果表明,该纳米复合膜的光催化降解是一个氧化断链过程,经紫外光照射310 h后失重率达到55%,是PVC-TiO_2复合膜的2倍,是纯PVC膜的3.5倍,说明草酸的掺杂可以促进PVC-OA-TiO_2复合膜更快地被光降解.草酸作为一个良好的电子给体,能不可逆地与TiO_2表面产生的空穴或表面羟基反应,抑制电子和空穴的复合,从而显著提高PVC-OA-TiO_2的光催化降解速率.     

硅团簇结构和碎片行为的紧束缚理论方法

利用紧束缚分子动力学模拟退火方法研究了硅团簇Sin(n=2—14)的结构性质和能量.通过与前人工作结果(Si2—Si10)的比较,发现本理论方法的结果相当准确地再现了从头计算的结论.对较大的硅团簇所作的计算给出了有意义的结构预测.从能量观点出发,计算结果表明原子数分别为4,6,7,10,12和14的硅团簇较为稳定.还进一步研究了硅团簇的碎片行为,理论计算的结果表明较大的硅团簇的稳定碎片产物通常包括一个或两个“幻数”团簇