Binary and ternary chromium(III) complexes with cellular reductants and DNA components isolated from redox type systems. Part 1. Chromium(VI)–cysteine–adenine (adenosine,ATP)

The reduction of CrO₃ with an excess of L-cysteine and its interaction with DNA fragments (adenine, adenosine) and ATP nucleotide was studied by analysis of the isolated solid products. The precipitates were characterised by elemental analyses, FAB mass spectral data, spectroscopic methods (u.v.–vis., f.i.r., i.r.) and magnetic measurements. The Cr^III complexes obtained appear to be various Cr^III cysteinate and adenine or ATP (but not adenosine) ternary species of the addition type bound through the hydrogen bonding network.     

Synthesis and properties of 1-(6-methoxy)-2-benzothiazolyl)-2-pyridones

Substituted ]-(6-methoxy-2-benzothiazolyt)-2-pyridones were prepared from 2-amino-6-methoxybenzathiazate through N-(6-methoxy-2-benzothiazotyl) cyanvorearmileaznd-3-aryl-N-(6-methoxy-2-benzothiazolyt)-2-cyano-2-propenamides. The cyclization of the latter with malonodinitrile in the presence of piperidine gave the corresponding pyridones. The structures of the synthesized compounds were confirmed by¹H NMR and mass spectral data.Department of Organic Chemistry, Mass Spectrometry Laboratory, Slovak Technical University, 812 37 Bratislava, Slovakia. Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1402–1404, October, 1995. Original article submitted August 24, 1995.     

Carrier influence on the paramagnetic and catalytic properties of supported titanium complexes

Alumina-silica possessing various Al₂O₃/SiO₂ ratios was used as a carrier of surface titanium complexes. The systems obtained were examined as models for the investigation of the macroligand (inorganic gel) influence on the physicochemical properties of supported transition metal complexes. The titanium complexes were prepared first by the reaction of CpTiCl₃, with the hydroxyl groups of the gel and then reduced by an excess of BuLi. The influence was established of the basic gel properties on: (a) the amount of titanium(IV) and titanium(III) complexes on the alumina-silica gel surfaces; (b) the symmetry of the surface Ti^III surface complexes; (c) the electron density around the surface-Ti^III ions, ionic or covalent bonds character in a complex; and (d) the catalytic activity in olefin hydrogenation.     

Cis-coordination of the chromate anions in helical Co/Ni block-type polymeric systems. Structural and spectroscopic characteristics of catena(μ-CrO4-O,O′)[Co(HIm)3H2O] and catena(μ-CrO4-O,O′)[Co0.43Ni0.57(HIm)3H2O]

Two polymeric complexes: catena(μ-CrO₄-O,O′)[Co(HIm)₃H₂O] (1) and catena(μ-CrO₄-O,O′)[Co_0.43Ni_0.57(HIm)₃H₂O] (2) (where HIm=imidazole) with a cis-bridging coordination mode of the CrO₄ ²⁻ anion have been synthesized and characterized by X-ray and spectroscopic methods. These crystals were isolated from nine systems of varying reagent molar ratios and three excluding anions: Cl⁻, NO₃ ⁻ and SO₄ ²⁻ exclusively as mer [M(HIm)₃O₃]-type isomers. The unit cell of these isostructural complexes (monoclinic crystal system P2₁ /n) contains two independent helixes, left- and right handed, stabilized by intrahelical and interhelical hydrogen bonding and π–π interaction between pairs of the imidazole rings from neighbouring helixes. The Raman spectra at 77 K of 1 and 2 deconvoluted into lorentzian components revealed the block-type polymeric structure of the complexes. Moreover, the solution studies at millimolar concentrations of 1 and 2 indicated their complete decomposition in water. Four K electronic spectral analysis of the crystals (band deconvolution into gaussian components) enhanced with the data obtained in the polarized light allowed for assignment of the bands to the respective d–d transition (D_4h symmetry). It was found that the metallic centres are independently absorbing species, which supports the suggestion of a block-type structure of the polymers. The respective crystal field parameters for Co and Ni were calculated.     

Fluorescence lifetimes and spectral properties of protochlorophyllide in organic solvents in relation to the respective parameters in vivo

In this work, absorption and fluorescence spectra of protochlorophyllide (Pchlide), as well as its fluorescence lifetime, were investigated in organic solvents having different physical properties. The obtained Pchlide spectral features are discussed in relation to the parameters describing solvent properties (refractive index and dielectric constant) and taking into account the specific solvent-Pchlide interaction. The correlation of Pchlide Qy and Soret absorption bands with solvent polarizability function ((n2 - 1)/(n2 + 2)) has been found; however, the dispersion of the observed points was rather high. A small Stokes shift of a magnitude between 50 and 300 cm(-1) was found, which indicates low sensitivity of Pchlide to nonspecific solvation. The fluorescence decay of Pchlide was single exponential in all the investigated solvents, with the lifetime value ranging from 5.2 ns for dioxane to 3.5 ns for methanol. Dependence of the obtained fluorescence lifetimes on the solvent orientation polarizability, a parameter being the function of both refractive index and dielectric constant, was discussed. In water-methanol mixtures, a further decrease of the fluorescence lifetime was observed, giving values of 2.9 ns for 25% methanol. Double-exponential decay of Pchlide fluorescence was found for Pchlide in a solution of 15% methanol with the lifetimes of 4.5 +/- 0.5 ns and 1.2 +/- 0.3 ns and in pure water with the lifetimes of 2.5 +/- 0.5 ns and 0.4 +/- 0.1 ns. The obtained results are discussed in relation to spectroscopic properties of Pchlide in vivo.     

Distance distributions and dynamics of a zinc finger peptide from fluorescence resonance energy transfer measurements

Time-resolved fluorescence resonance energy transfer (FRET) measurements were used to measure distance distributions and intramolecular dynamics (site-to-site diffusion) of a 28-residue single-domain zinc finger peptide in the absence and presence of zinc ion. Energy transfer was measured between TRP₁₄ and a N-terminal DNS group. As expected, the TRP-to-DNS distance distribution for zinc-bound peptide is shorter and narrower (R _av=11.2 Å,hw=2.8 Å) than the metal-free peptide (R _av=20.1 Å,hw=14.5 Å). The degree of mutual donor-to-acceptor diffusion (D) was also determined for these distributions. For zinc-bound peptide there is no detectible diffusion (D0.2 Ų/ns), whereas for metal-free peptide a considerable amount of motion is occurring between the donor and the acceptor (D=12 Ų/ns). These results indicate that the zinc-bound peptide folds into a unique, well-defined conformation, whereas the metal-free conformation is flexible and rapidly changing. The absence of detectible mutual site-to-site diffusion between the donor and the acceptor in the metal-bound zinc finger peptide indicates that intramolecular motion is essentially frozen out, on the FRET time scale, as a consequence of zinc coordination.Dedicated to the memory of Barbara D. Wells.     

Distance-dependent fluorescence quenching ofN-acetyl-l-tryptophanamide by acrylamide

We examined the time-dependent intensity decays ofN-acetyl-l-tryptophanamide (NATA) when collisionally quenched by acrylamide in propylene glycol over a range of temperatures. The intensity decays of NATA became increasingly heterogeneous in the presence of acrylamide. The NATA intensity decays were not consistent with the Collins-Kimball radiation boundary condition (RBC) model for quenching. The steady-state Stern-Volmer plots show significant upward curvature, and quenching of NATA by acrylamide was observed even in vitrified propylene glycol, where translational diffusion cannot occur during the lifetime of the excited state. These frequencydomain and steady-state data indicate a through-space quenching interaction between NATA and acrylamide, and the results are consistent with a rate constant for quenching that depends exponentially on the fluorophore-quencher separation distance. The exponential distance-dependent rate of quenching also explains the upward curvature of the Stern-Volmer plot, and the steady-state data aid in determining the interaction distance between NATA and acrylamide. These results suggest that the distance-dependent quenching rates need to be considered in the interpretation of acrylamide quenching of proteins.     

Effect of extractant on arsenic(V) recovery from sulfuric acid solutions

Extraction of arsenic(V) from sulfuric acid solutions with various extractants in multistage counter-current extraction-stripping systems was compared. The extraction ability of the extractants studied showed the following order: ENIM 100>TBP=CYANEX 923>2-methylhexanol. The extraction depends significantly on the number of extraction stages and the phase ratios in extraction. The effects of the number of stripping stages and the phase ratio in stripping are less important.     

Flotation—spectrophotometric determination of osmium with thiocyanate and methylene blue

A sensitive flotation—spectrophotometric method, based on the ion associate formed by the anionic thiocyanate complex of osmium with the basic dye methylene blue (MB) is described. The ion associate precipitates when the aqueous solution is shaken with toluene, and the separated and washed compound is dissolved in acetone. The molar absorptivity is 2.2 × 10⁵ l mol^-1 cm^-1 at 655 nm. Beer's law is obeyed. The molar ratio of Os:SCN:MB in the separated and washed ion associate is 1:6:3. Ruthenium reacts similarly. The method is applied to the determination of traces of osmium in crucible platinum after separation of osmium by distillation as tetroxide.     

Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.