Analysis of the Coriolis Interaction between nu(6) and nu(8) Bands of HCOOH

The Fourier transform infrared (FTIR) spectrum of the nu(6) band of formic acid (HCOOH) has been recorded with a resolution of 0.0024 cm(-1) in the spectral range 1050-1160 cm(-1). The nu(6) band was found to be strongly perturbed by the nearby nu(8) band centered at about 1033.5 cm(-1). Using a Watson's A-reduced Hamiltonian in the I(r) representation, and with the inclusion of a-type Coriolis coupling constant, a simultaneous fit of nu(6) and nu(8) was performed. A total of 2485 infrared transitions including about 700 perturbed transitions of nu(6) and 19 transitions of nu(8) was fitted with an rms uncertainty of 0.0006 cm(-1). Accurate rovibrational constants up to sextic order for both nu(6) and nu(8) were obtained. The nu(6) band was analyzed to be a type AB hybrid with a band center at 1104.852109 +/- 0.000050 cm(-1). The band center for nu(8) was found to be 1033.4647 +/- 0.0021 cm(-1). Copyright 2000 Academic Press.     

The High-Resolution FTIR Spectrum of the nu(1) Band of DOBr

Fourier transform infrared spectra of the nu(1) bands of DO(79)Br and DO(81)Br have been recorded with a resolution of 0.0055 cm(-1) in the frequency range of 2510-2800 cm(-1). A total of 1901 lines of the A/B hybrid-type bands of both isotopic species have been assigned and fitted to upper state rovibrational constants employing a Watson's S-reduced Hamiltonian up to sextic terms. The K(a) >/= 4 subband transitions were found to be perturbed and were not included in the fit. The unperturbed band centers for nu(1) of DO(79)Br and DO(81)Br are 2668.79211 +/- 0.00006 and 2668.78842 +/- 0.00005 cm(-1), respectively. The ratio of the vibrational dipole transition moments (μ(a):μ(b)) was found to be 1.30 +/- 0.04 for the band. Copyright 2000 Academic Press.     

Statistical estimation of transmission loss from geoacoustic inversion using a towed array

Geoacoustic inversion estimates environmental parameters from measured acoustic fields (e.g., received on a towed array). The inversion results have some uncertainty due to noise in the data and modeling errors. Based on the posterior probability density of environmental parameters obtained from inversion, a statistical estimation of transmission loss (TL) can be performed and a credibility level envelope or uncertainty band for the TL generated. This uncertainty band accounts for the inherent variability of the environment not usually contained in sonar performance prediction model inputs. The approach follows [Gerstoft et al. IEEE J. Ocean. Eng. 31, 299-307 (2006)] and is demonstrated with data obtained from the MAPEX2000 experiment conducted by the NATO Undersea Research Center using a towed array and a moored source in the Mediterranean Sea in November 2000. Based on the geoacoustic inversion results, the TL and its variability are estimated and compared with the measured TL.     

Solid-state Er:Yb:glass laser mode-locked by using single-wall carbon nanotube thin film

We design single-wall carbon nanotube (SWNT) thin-film saturable absorbers (SAs) integrated onto semiconductor distributed Bragg reflectors for mode-locking solid-state Er:Yb:glass lasers. We characterize the low nonsaturable loss, high-damage-threshold SWNT SAs and verify their operation up to a pulse fluence of 2 mJ/cm(2). We demonstrate passive fundamental continuous-wave mode locking with and without group-delay dispersion compensation. Without compensation the laser produces chirped 1.8 ps pulses with a spectral width of 3.8 nm. With compensation, we obtain 261 fs Fourier-transform-limited pulses with a spectral width of 9.6 nm.     

The oil-absorbing property of polyhydroxyalkanoate films and its practical application: a refreshing new outlook for an old degrading material

Polyhydroxyalkanoates (PHAs) have attracted the attention of academia and industry because of their plastic-like properties and biodegradability. However, practical applications as a commodity material have not materialized because of their high production cost and unsatisfactory mechanical properties. PHAs are also believed to have high-value applications as an absorbable biomaterial for tissue engineering and drug-delivery devices because of their biocompatibility. However, research in these areas is still in its very early stages. The main problem faced by proponents of PHAs is the lack of a niche area where PHAs will be the most desired material in terms of its function during use rather than because of its eco-friendly virtues after use. Here, we report on the oil-absorbing property of PHA films and its potential applications. By comparing with some of the existing commercial products, the potential application of PHAs as cosmetic oil-blotting films is revealed for the first time. Besides having the ability to rapidly absorb and retain oil, PHA films also have a natural oil-indicator property, showing obvious changes in opacity following oil absorption. Surface analysis revealed that the surface structures such as porosity and smoothness exert great influence on the rapid oil-absorption properties of the PHA films. These newly discovered properties could be exploited to create a niche area for the practical applications of PHAs.     

Structures of oxygenated cyclohexa-1,3-diene-maleic anyhydride cycloadducts. Structural evidence suggests a stepwise retro-Diels-Alder reaction

The structures of a series of cyclohexadiene-maleic anhydride cycloadducts show structural parameters consistent with the early stages of the retro-Diels-Alder (rDA) reaction in the ground state structure. The symmetrical adduct shows effects consistent with a synchronous rDA reaction. An asynchronous rDA reaction is suggested in the structure of 8, and the first evidence suggesting a two-step retro-Diels-Alder mechanism is provided by the deoxygenated adduct 9.     

Bentonite slurries—zeta potential,yield stress,adsorbed additive and time-dependent behaviour

Bentonite clay is a vital ingredient of drilling mud. The time-dependent and high shear thinning yield stress behaviour of drilling mud is essential for maintaining wellbore stability and to remove cuttings, cool and clean the drill bit of debris. As-prepared 3, 5 and 7 wt.% bentonite clay slurries displayed time-dependent behaviour where the yield stress (measured after quick stirring) decreased with time of rest. An equilibrium value is reached after 24 h. Despite the low solids concentration, the yield stress is already relatively high and is displayed at all pH level. The yield stress is maximum at pH 2 and minimum at pH ∼ 7. This yield stress is due to the formation of gel structure by the swelling clay particles. However the addition of phosphate additives such as (PO₃)^19 −, (P₃O₁₀)^5 − and (P₂O₇)^4 − completely dispersed the clay slurries at pH above 6. At pH below 6, yield stress is still present but is 3-folds smaller than that of the pure bentonite slurry. With phosphate additives, the magnitude of the critical zeta potential at the complete dispersion pH is ca 48 mV. However for the pure bentonite, the slurry remained flocculated at zeta potential of >50 mV in magnitude. Interestingly, (P₂O₇)^4 − anions is more effective than the other two phosphate additives in reducing the yield stress at low pH, ∼ 2.0.     

Chemically-modified graphenes for oxidation of DNA bases: analytical parameters

We studied the electroanalytical performances of chemically-modified graphenes (CMGs) containing different defect densities and amounts of oxygen-containing groups, namely graphite oxide (GPO), graphene oxide (GO), thermally reduced graphene oxide (TR-GO) and electrochemically reduced graphene oxide (ER-GO) by comparing the sensitivity, selectivity, linearity and repeatability towards the oxidation of DNA bases. We have observed that for differential pulse voltammetric (DPV) detection of adenine and cytosine, all CMGs showed enhanced sensitivity to oxidation, while for guanine and thymine, ER-GO and TR-GO exhibited much improved sensitivity over bare glassy carbon (GC) as well as over GPO and GO. There is also significant selectivity enhancement when using GPO for adenine and TR-GO for thymine. Our results have uncovered that the differences in surface functionalities, structure and defects of various CMGs largely influence their electrochemical behaviour in detecting the oxidation of DNA bases. The findings in this report will provide a useful guide for the future development of label-free electrochemical devices for DNA analysis.     

A new hybrid method for nonlinear complementarity problems

In this paper, a new hybrid method is proposed for solving nonlinear complementarity problems (NCP) with P ₀ function. In the new method, we combine a smoothing nonmonotone trust region method based on a conic model and line search techniques. We reformulate the NCP as a system of semismooth equations using the Fischer-Burmeister function. Using Kanzow’s smooth approximation function to construct the smooth operator, we propose a smoothing nonmonotone trust region algorithm of a conic model for solving the NCP with P ₀ functions. This is different from the classical trust region methods, in that when a trial step is not accepted, the method does not resolve the trust region subproblem but generates an iterative point whose steplength is defined by a line search. We prove that every accumulation point of the sequence generated by the algorithm is a solution of the NCP. Under a nonsingularity condition, the superlinear convergence of the algorithm is established without a strict complementarity condition.     

A smoothing sample average approximation method for stochastic optimization problems with CVaR risk measure

This paper is concerned with solving single CVaR and mixed CVaR minimization problems. A CHKS-type smoothing sample average approximation (SAA) method is proposed for solving these two problems, which retains the convexity and smoothness of the original problem and is easy to implement. For any fixed smoothing constant ε, this method produces a sequence whose cluster points are weak stationary points of the CVaR optimization problems with probability one. This framework of combining smoothing technique and SAA scheme can be extended to other smoothing functions as well. Practical numerical examples arising from logistics management are presented to show the usefulness of this method.