Modeling and analysis of laminate composite plates with embedded active-passive piezoelectric networks

The objective of this work is to present the finite element modeling of laminate composite plates with embedded piezoelectric patches or layers that are then connected to active-passive resonant shunt circuits, composed of resistance, inductance and voltage source. Applications to passive vibration control and active control authority enhancement are also presented and discussed. The finite element model is based on an equivalent single layer theory combined with a third-order shear deformation theory. A stress-voltage electromechanical model is considered for the piezoelectric materials fully coupled to the electrical circuits. To this end, the electrical circuit equations are also included in the variational formulation. Hence, conservation of charge and full electromechanical coupling are guaranteed. The formulation results in a coupled finite element model with mechanical (displacements) and electrical (charges at electrodes) degrees of freedom. For a Graphite-Epoxy (Carbon-Fibre Reinforced) laminate composite plate, a parametric analysis is performed to evaluate optimal locations along the plate plane (xy) and thickness (z) that maximize the effective modal electromechanical coupling coefficient. Then, the passive vibration control performance is evaluated for a network of optimally located shunted piezoelectric patches embedded in the plate, through the design of resistance and inductance values of each circuit, to reduce the vibration amplitude of the first four vibration modes. A vibration amplitude reduction of at least 10 dB for all vibration modes was observed. Then, an analysis of the control authority enhancement due to the resonant shunt circuit, when the piezoelectric patches are used as actuators, is performed. It is shown that the control authority can indeed be improved near a selected resonance even with multiple pairs of piezoelectric patches and active-passive circuits acting simultaneously.     

Linear and nonlinear 2D finite element analysis of sloshing modes and pressures in rectangular tanks subject to horizontal harmonic motions

The influence of nonlinear wave theory on the sloshing natural periods and their modal pressure distributions are investigated for rectangular tanks under the assumption of two-dimensional behavior. Natural periods and mode shapes are computed and compared for both linear wave theory (LWT) and nonlinear wave theory (NLWT) models, using the finite element package ABAQUS. Linear wave theory is implemented in an acoustic model, whereas a plane strain problem with large displacements is used in NLWT. Pressure distributions acting on the tank walls are obtained for the first three sloshing modes using both linear and nonlinear wave theory. It is found that the nonlinearity does not have significant effects on the natural sloshing periods. For the sloshing pressures on the tank walls, different distributions were found using linear and nonlinear wave theory models. However, in all cases studied, the linear wave theory conservatively estimated the magnitude of the pressure distribution, whereas larger pressures resultant heights were obtained when using the nonlinear theory. It is concluded that the nonlinearity of the surface wave does not have major effects in the pressure distribution on the walls for rectangular tanks.     

Parallel Jacobian-free Newton Krylov solution of the discrete ordinates method with flux limiters for 3D radiative transfer

The present study introduces a parallel Jacobian-free Newton Krylov (JFNK) general minimal residual (GMRES) solution for the discretized radiative transfer equation (RTE) in 3D, absorbing, emitting and scattering media. For the angular and spatial discretization of the RTE, the discrete ordinates method (DOM) and the finite volume method (FVM) including flux limiters are employed, respectively. Instead of forming and storing a large Jacobian matrix, JFNK methods allow for large memory savings as the required Jacobian-vector products are rather approximated by semiexact and numerical formulations, for which convergence and computational times are presented. Parallelization of the GMRES solution is introduced in a combined memory-shared/memory-distributed formulation that takes advantage of the fact that only large vector arrays remain in the JFNK process. Results are presented for 3D test cases including a simple homogeneous, isotropic medium and a more complex non-homogeneous, non-isothermal, absorbing–emitting and anisotropic scattering medium with collimated intensities. Additionally, convergence and stability of Gram–Schmidt and Householder orthogonalizations for the Arnoldi process in the parallel GMRES algorithms are discussed and analyzed. Overall, the introduction of JFNK methods results in a parallel, yet scalable to the tested 2048 processors, and memory affordable solution to 3D radiative transfer problems without compromising the accuracy and convergence of a Newton-like solution.     

Soil delta15N patterns in old-growth forests of southern Chile as integrator for N-cycling

Old-growth forests of southern Chile represent an important reserve of temperate (rain) forests in the world. Wetter and colder forest ecosystems appear to be more efficient in conserving and recycling N such that mostly non-plant available N species are lost, which could be indicated by more depleted delta15N values of the soil and plants. Hydrological N loss from the old-growth forests in southern Chile occurs mainly via dissolved organic nitrogen and not via dissolved inorganic N. Forest disturbances (e.g. fire, clear-cutting or enhanced N deposition) cause (abrupt) changes in ecosystem N-cycling processes. In this study, we hypothesized that delta15N signatures of soil profiles under old-growth forests could be used as an integrator for ecosystem N-cycling, and changes of these delta15N profiles could be valuable to assess ecosystem resilience towards disturbances. Six old-growth forests were selected in the phytogeographical region of the Valdivian rain forest in southern Chile. One of the sites has been partly burned in February 2002. First, we observed that ecosystems with higher mean annual precipitation and lower mean annual temperature were relatively more depleted in 15N. Secondly, we found that a forest fire caused a 100-fold increase of the nitrate export and induced an enrichment of the soil delta15N signal in the upper 20 cm.     

Columnar liquid crystalline benzenetrisamides with pendant 1,3,4-oxadiazole groups

Novel liquid crystal materials based on 1,3,5-benzenetrisamide derivatives with three pendant 2-phenyl-5-(mono-, di-, and/or tri-n-alkoxyphenyl)-1,3,4-oxadiazole arms (Ia–c, IIa–c) were prepared. The mesomorphic properties of these compounds were characterised and studied by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. The formation of a columnar mesophase was found to be dependent on the number of alkoxy side chains. The compounds Ib and IIb, with a total of six alkoxy chains, and compounds Ic and IIc, with nine alkoxy chains, exhibited an enantiotropic hexagonal columnar (Col_h ) phase with high isotropisation temperatures; however, compounds Ia and IIa with a total of three alkoxy chains formed a crystalline phase. Compounds IIb and c were room temperature liquid crystals.     

Development of a so-called hour method for analysis of plutonium in soil samples

A short overview of HPLC column packings is presented. The properties of chromatographic carriers and the possibilities to combine the solid matrices with organic polymeric stationary phases are elucidated in detail. The latest achievements and anticipated future developments in the area are outlined.     

Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.     

Adsorptive stripping voltammetry of nickel with 1-nitroso-2-napthol using a bismuth film electrode

A sensitive procedure is presented for the voltammetric determination of nickel. The procedure involves an adsorptive accumulation of nickel 1-nitroso-2-napthol (NN) complex on a bismuth film electrode prepared ex situ by electrodeposition. The most suitable operating conditions and parameters such as pH, ligand concentration (C_NN), adsorptive potential (E_ads), adsorptive time (t_ads), scan rate and others were selected and the determination of nickel in aqueous solutions using the standard addition method was possible. The adsorbed Ni-NN complex gives a well defined cathodic stripping peak current at −0.70 V, which was used for the determination of nickel in the concentration range of 10.0-70.0 μg L⁻¹ (pH 7.5; C_NN 6.5 μmol L⁻¹; E_ads −0.30 V; t_ads 60 s) with a detection limit of 0.1 μg L⁻¹. The relative standard deviation for a solution containing 10.0 μg L⁻¹ of Ni(II) was 3.5% (n = 4). The proposed method was validated determining Ni(II) in certified reference waste water (SPS-WW1) and Certified Reference Water for Trace Elements (TMDA 51.3) with satisfactory results. Then lake water samples were analyzed.     

Addition of carbon nucleophiles to cyclic N-acyliminium and oxocarbenium ions under solvent-free conditions

The InCl₃-catalyzed addition of carbon nucleophiles to cyclic N-acyliminium and oxocarbenium ions under solvent-free conditions at room temperature is described. The corresponding α-substituted heterocycles were obtained in moderate to excellent yields.