On-line on-chip post-column derivatisation reactions for pre-ionisation of analytes and cluster analysis in gradient micro-liquid chromatography/electrospray mass spectrometry

A system is presented that demonstrates the principle of on-line and on-chip post-column derivatisation reactions in micro-high-performance liquid chromatography (micro-HPLC) hyphenated to electrospray time-of-flight mass spectrometry (ESI-TOFMS). In this micro-HPLC-chip-MS set-up, the analytes are separated using gradient micro-HPLC and subsequently derivatised on-chip and detected. One of the major limitations of MS detection is its dependency on the degree of ionisation, which is widely variable and compound-specific. Optimising and controlling the degree of ionisation in a simple manner would allow MS detection to be truly generic. One way of achieving this is by pre-ionisation of analytes using simple derivatisation procedures that are both rapid and quantitative. Performing this in situ on the system described here overcomes issues of sample handling and efficiency losses when time-consuming "bench chemistry" is necessary prior to analysis. The power of the system is demonstrated by the separation of primary and secondary amines, which are subsequently derivatised with a positively charged phosphonium complex and detected in an enhanced manner. Typically, molecular cations (M(+)) are detected showing that the ionisation process is dominated by the phosphonium species, leading to more constant ionisation for a variety of compounds. In addition, stable isotopically labelled ((12)C/(13)C)-phosphonium reagent is used for the reactions, allowing for inherent signal/noise (S/N) improvement and automated data processing using cluster analysis. A similar reaction scheme is used for the derivatisation of ketones and aldehydes, also demonstrating dramatic increases in sensitivity, especially with increasing temperature. Minimal loss in chromatographic fidelity in terms of retention times is observed by the introduction of the micromixer chip into the system. Optimal flow rates in micro-HPLC and ESI-MS are compatible with flow rates for the chip as well as a multitude of in-line optical detectors including UV and fluorescence. In addition, the micromixer chip can be positioned pre-column if preferred. The system is robust, easily fully automated and applicable to a wide variety of reactions. The system has a major advantage in its simple robust connection to the "normal scale" outside world.     

Preparation and properties of polymers from aryl cyclic sulfonium zwitterions

A new class of zwitterionic monomers were prepared in which the positive and negative sites are cyclic sulfonium and phenolate. Thermal polymerization occurs by phenolic anionic attack upon the aliphatic carbon α to the sulfonium sulfur. Polymerization proceeds with ring opening and net loss of charge to form nonionic polymers. The monomeric zwitterions are generally hydrated, crystalline solids that are soluble in water or alcohol. Chlorination of the aromatic portion of the molecule yields nonhydrated species. The polymerizations of 1-(4-hydroxy-3-methylphenyl)tetrahydrothiophenium hydroxide inner salt (dihydrate) and 1-(3,5-dichloro-4-hydroxyphenyl)tetrahydrothiophenium hydroxide inner salt were studied. The latter monomer gave a polymer with M?_n of 46,000 when a nucleophile was present as an initiator. The physical properties of this polymer were determined. Cyclization appears to be the main mechanism of termination in the polymerization of zwitterions.     

Optimal population analysis

An easy method of approximating the electron density of a molecule by expressing it as a sum of squares of atomic orbitals is described. The coefficients are determined by minimizing the error in the electric field. The optimal population analysis is an integration of this optimized density over the orbitals belonging to one atom. The Mulliken population analysis can be interpreted as the integral of a Mulliken density that is a similar expression with fixed coefficients. The two densities are compared in détail using calculations on the water molecule and, more briefly, HF, LiH, BH, and C₂H₄. The error in the densities is identified and examined. The optimal population analysis is strongly recommended as a practical improvement to the Mulliken populations.     

Partial purification of active delta and epsilon subunits of the membrane ATPase from escherichia coli.

We have partially purified active delta and epsilon subunits of the E. coli membrane-bound Mg2+-ATPase (ECF1). Treating purified ECF1 with 50% pyridine precipitates the major subunits (alpha, beta, and gamma) of the enzyme, but the two minor subunits (delta and epsilon), which are present in relatively small amounts, remain in solution. The delta and epsilon subunits were then resolved from one another by anion exchange chromatography. The partially purified epsilon strongly inhibits the hydrolytic activity of ECF1. The epsilon fraction inhibits both the highly purified five-subunit ATPase and the enzyme deficient in the delta subunit. The latter result indicates that the delta subunit is not required for inhibition by epsilon. By contrast, two-subunit enzyme, consisting chiefly of the alpha and beta subunits, was insensitive to the ATPase inhibitor, suggesting that the gamma subunit may be required for inhibition by epsilon. The partially purified delta subunit restored the capacity of ATPase deficient in delta to recombine with ATPase-depleted membranes and to reconstitute ATP-dependent transhydrogenase. Previously we reported (Biochem, Biophys. Res. Commun. 62:764 [1975]) that a fraction containing both the delta and epsilon subunits of ECF1 restored the capacity of ATPase missing delta to recombine with depleted membranes and to function as a coupling factor in oxidative phosphorylation and for the energized transhydrogenase. These reconstitution experiments using isolated subunits provide rather substantial evidence that the delta subunit is essential for attaching the ATPase to the membrane and that the epsilon subunit has a regulatory function as an inhibitor of the ATPase activity of ECF1.     

Energy migration in novel pH-triggered self-assembled beta-sheet ribbons

Energy migration between tryptophan residues has been experimentally demonstrated in self-assembled peptide tapes. Each peptide contains 11 amino acids with a Trp at position 6. The peptide self-assembly is pH-sensitive and forms amphiphilic tapes, which further stack in ribbons (double tapes) and fibrils in water depending on the concentration. Fluorescence spectra, quenching, and anisotropy experiments showed that when the pH is lowered from 9 to 2, the peptide self-assembly buries the tryptophan in a hydrophobic and restricted environment in the interior of stable ribbons as expected on the basis of the peptide design. These fluorescence data support directly and for the first time the presence of such ribbons which are characterized by a highly packed and stable hydrophobic interior. In common with Trp in many proteins, fluorescence lifetimes are nonexponential, but the average lifetime is shorter at low pH, possibly due to quenching with neighboring Phe residues. Unexpectedly, time-resolved fluorescence anisotropy does not change significantly with self-assembly when in water. In highly viscous sucrose-water mixtures, the anisotropy decay at low pH was largely unchanged compared to that in water, whereas at high pH, the anisotropy decay increased significantly. We concluded that depolarization at low pH was not due to rotational diffusion but mainly due to energy migration between adjacent tryptophan residues. This was supported by a master equation kinetic model of Trp-Trp energy migration, which showed that the simulated and experimental results are in good agreement, although on average only three Trp residues were visited before emission.     

High-performance liquid chromatography of cardiolipin

Resolution of freshly prepared and of commercially available (degraded) samples of cardiolipin into 15-30 components has been accomplished by reversed-phase high-performance liquid chromatography using a 3-micron particulate Microsorb C18 column irrigated with linear gradients of acetonitrile--methanol--10 mM phosphate buffer pH 7.4. Selected resolved components were crystallized and characterized by infrared absorption spectra. Saponification of other components and identification of component fatty acids by reversed-phase high-performance liquid chromatography demonstrated the presence of ten fatty acids (14:0, 14:1, 16:0, 16:1, 18:0, 18:1, 18:2, 18:3, 20:0, 20:4), with linoleic acid (18:2) identified in all resolved components. From fatty acid composition data it appears that several resolved fractions consist of single cardiolipin molecular species.     

A thermal synthesis of a new tin(IV) dithiocarbamate

A new tin dithiocarbamate containing sulphur bridges, di--sulphidobis [bis(N,N-diethyldithiocarbamato)tin(IV)], has been isolated from the thermal decomposition of tetrakis(N,N-diethyldithiocarbamato)tin(IV). A dimeric structure is proposed on the basis of results from mass spectrometry, infrared spectroscopy, thermal analysis and vapour pressure osmometry.

---

Zusammenfassung Ein neues, Schwefelbrücken enthaltendes Zinn-Dithiocarbamat, Di--sulfidobis[bis(N,N-diäthyldithiocarbamato)Zinn(IV)], wurde bei der Zersetzung von Tetrakis(N,N-diäthyl-dithiocarbamato)Zinn(IV) isoliert. Aufgrund der Ergebnisse der Massenspektrometrie, der Infrarotspektroskopie, der Thermoanalyse und der Dampfdruck-Osmometrie wird eine Dimerstruktur vorgeschlagen.

---

Résumé Un nouveau dithiocarbamate d'étain contenant des ponts de soufre, le di--sulfidobis[bis(N,N-diéthyl-dithiocarbamato)é tain(IV)], a été isolé lors de la décomposition thermique du tétrakis(N,N-diethyl-dithiocarbamato) étain(IV). Une structure dimère est proposéeà partir des résultats obtenus par spectrométrie de masse, spectroscopie infrarouge, analyse thermique et osmométrie sous pression de vapeur.

---

—-- [/N,N- (/IV)], [/N,N- (/IV)], , (N,N- ) (IV). - , , .

---

---

The authors gratefully acknowledge the assistance given by Dr. A. G. Wedd with the vacuum sublimation technique. One of us, G. K. B., is grateful for a research scholarship provided by La Trobe University.     

INTERACTION OF VIOLOGEN DYES WITH CHROMATOPHORES AND REACTION-CENTER PREPARATIONS FROM RHODOSPIRILLUM RUBRUM

Abstract —Various low-potential viologen dyes enhance light-induced absorption changes in the near-infrared region (ΔA870) in chromatophore preparations from Rhodospirillum rubrum in the presence of dichlorophenol indophenol and a high concentration of ascorbate (DCPIP + asc). An increase in ΔA870 was also observed in large reaction-center preparations from R. rubrum with viologens in the presence of ascorbate. Our results indicate that E'₀, of the primary electron acceptor X may be as low as -0.37 V, as suggested recently by P. A. Loach (1973, personal communication).     

Measurement of cell migration on surface-bound fibronectin gradients

A novel technique for the quantitative observation of cell migration along linear gradient substrates functionalized with adhesive proteins is presented. Gradients of the cell adhesion molecule fibronectin are generated by the cross diffusion of functionalizable alkanethiols on gold and characterized by X-ray photoelectron spectroscopy and surface plasmon resonance. Two distinct migration assays are described that characterize the movement of either sparsely populated noncontacting cells or a confluent monolayer of cells into free space. The drift speed of bovine aortic endothelial cells is measured and shown to increase along a fibronectin gradient when compared to a uniform control substrate using both assays. The results of these experiments establish reproducible conditions for studies of cell migration on gradients of surface-bound ligands.     

Reactions of metal carbonyl cluster complexes with multidentate phosphine ligands; reactions with bis(diphenylphosphino)methane

Reactions of Rh₆(CO)₁₆ with bis(diphenylphosphino)methane (dppm) gave Rh₆(CO)₁₄(dppm), Rh₆(CO)₁₂(dppm)₂, or Rh₆(CO)₁₀(dppm)₃, depending upon the reaction conditions. Rh₄(CO)₁₀(dppm) may be obtained from the reaction of Rh₄(CO)₁₂ with dppm, but this derivative rapidly decomposes in solution to give Rh₄(CO)₈(dppm)₂, Rh₆(CO)₁₄(dppm), and Rh₆(CO)₁₂(dppm)₂. Ir₄(CO)₁₀(dppm) and Ir₄(CO)₈(dppm)₂ have also been prepared, and their structures are discussed on the basis of infrared and ³¹P NMR spectroscopic data.