Evidence for facile atropisomerism and simple (non-nucleophilic) biradical-forming cycloaromatization within kedarcidin chromophore aglycon

The kinetics and thermodynamics of atropisomerism within the protected kedarcidin chromophore aglycon 8, as well as a series of ansa-bridged synthetic intermediates leading to 8, were determined by 1H NMR spectroscopy. The data show that the ratio of atropisomeric forms of chloropyridine-bridged ansa intermediates is subject to wide variation with seemingly subtle structural variation. The vinyl bromide 4, for example, in the first X-ray structure determination of a kedarcidin ansa-bridged system, was found to exist as a single atropisomer in the solid state, but a nearly equal mixture (K = 0.70) of isomers in solution (t1/2 for isomer interconversion approximately 0.2 s at 20 degrees C). The aglycon 8, a 2.2:1 mixture of atropisomers, was found to undergo direct unimolecular biradical-forming cycloaromatization at ambient temperature in a mixture of 1,4-cyclohexadiene-benzene, without nucleophilic activation. The product 9 was formed as a single atropisomer (k = 2 x 10-4 s-1, t1/2 = 58 min, 81% yield), suggesting that the rate of atropisomerism within 8 is rapid with respect to cycloaromatization. The rate of cycloaromatization of 8 was found to be highly solvent-dependent, being more rapid in the presence of a good hydrogen-atom donor, consistent with the earlier model studies of Hirama et al. that showed that certain nine-membered cyclic (Z)-enediynes may equilibrate with their biradical cycloaromatization products. Incubation of 8 with beta-mercaptoethanol, under conditions mimicking experiments leading to DNA cleavage with kedarcidin, showed no evidence for nucleophilic activation. The product of direct cycloaromatization (9) was isolated instead. The evidence suggests that kedarcidin, like the enediyne agent C-1027, is capable of spontaneous thermal biradical formation without prior chemical activation.     

Chemistry of 6 -pyrido[4,3- ]carbazoles part II: synthetic approaches to 6 -9-methoxy-5, 11-dimethylpyrido[4,3- ] fluorenes

Synthetic approaches to 6 -9-methoxy-5, 11-dimethylpyrido[4,3- ] fluorene are described, thus 2-[1-(4-pyridyl)ethyl]6-methoxyindanone has been reacted with vinylmagnesium bromide to yield 2-[1-(4-pyridyl)ethyl]-6 methoxy-1-vinyl-1-indanol. However, on dehydration this compound rearranges to 2-[1-(4-pyridyl)ethyl]-3-ethylidene-5-methoxyindene rather than the required isomer 3-ethylidine-2-[1-(4-pyridyl)ethyl]-5-methoxyindane needed fro pericyclic ring-closure to the pyrido[4,3- ]fluorene system. Reaction of -2-[1-methyl-1-(4-pyridyl)methylene]-6-methoxyindanone with ethylene triphenylphosphorane similarly gives 6-methoxy-spiro-2-[1-(2,3-dimethyl-3-(4-pyridyl)-cyclopropyl) indanone rather than the desired indane.     

Amide bond formation using an air-stable source of AlMe3

Synthesis of amides from coupling esters with a range of primary amines can be conveniently achieved in moderate to excellent yields (69-99%) using an air-stable adduct of trimethylaluminium (AlMe₃)₂·DABCO (DABCO is 1,4-diazobicyclo[2.2.2]octane), referred to as DABAL-Me₃. Reactions can be run without requiring the exclusion of atmospheric oxygen or the drying of solvents.     

1,1,3,3-Tetramethylguanidine-gallane, (Me2N)2CN(H).GaH3: an unusually strongly bound gallane adduct

The novel adduct 1,1,3,3-tetramethylguanidine-gallane, (Me2N)2CN(H).GaH3, has been prepared by the reaction of [(Me2N)2CNH2]+Cl- with LiGaH4 in Et2O solution. Its spectroscopic properties indicate a monomeric species with an unusually strong coordinate link between the imido function and GaH3, an inference confirmed by the crystal structure at 150 K which also reveals significant secondary interactions through non-classical N-H...H-Ga bridges. Despite the intrinsic strength of the Ga-N bond, however, vaporisation at ca. 310 K occurs with partial dissociation, and decomposition via more than one pathway proceeds at temperatures >330-350 K to give a variety of products, including the free base, Me2NH, H2, and a novel gallium-nitrogen compound composed of a Ga4N4 cubane-like core bridged on three edges by -N{C(NMe2)2}GaH2- units.     

Basicity of a stable carbene, 1,3-di-tert-butylimidazol-2-ylidene,in THF

The basicity of 1,3-di-tert-butylimidazol-2-ylidene (1) was measured in THF against three hydrocarbon indicators. Both ion pairs and free ions were found and the corresponding equilibrium constants were measured. Homoconjugation was not found in either THF or DMSO. The carbene is effectively more basic in DMSO by several pK units, probably because of hydrogen bonding of 1-H(+) to DMSO. Model ab initio computations are consistent with these results.     

The stereospecificity at the iron center of the decarbonylation of an ironacetyl complex

The dinuclear complex [(h⁵-1-CH₃-3-C₆H₅C₅H₃)Fe(CO)₂]₂ was synthesized by reaction of Fe₂(CO)9 with 1-methyl-3-phenylcyclopentadiene; it was converted to (h⁵-1-CH₃-3-C₆H₅C₅H₃)Fe(CO)₂CH₃ by reduction with sodium amalgam and addition of CH₃l, and thence to (h⁵-1-CH₃-3-C₆H₅C₅H₃)Fe(CO)[P(C₆H₅)₃] (COCH₃) (I) by reaction with P(C₆H₅)₃. The acetyl I was separated into two diastereomerically related pairs of enantiomers. Ia and Ib, by a combination of column chromatography on alumina and crystallization from benzene/pentane. The photochemical decarbonylation of Ia and Ib in benzene or THF solution was examined by ¹H NMR spectroscopy. This reaction proceeds with high stereospecificity (>84% retention or inversion) at the iron center to yield (h⁵-1-CH₃-3-C₆H₈C₅H₃)Fe(CO)[P(C₆H₅)₃]CH₃(II), enriched in the diastereomerically related pairs of enantiomers, IIa and IIb, respectively. Since IIa and IIb epimerize under the photolytic conditions of decarbonylation, the actual stereospecificity of the conversion of I to II is higher than 84%, and likely 100%. This is supported by the data from kinetic studies of the decarbonylation of I and the epimerization of II, carried out under identical photolytic conditions. The implications of the foregoing results to the mechanism of the decarbonylation are considered. Also described herein is the synthesis of other complexes with two asymmetric centers of the general formula (h⁵-cyclopentadienyl)Fe(CO)(L)(COR) and (h⁵-cyclopentadienyl)Fe(CO)(L)R that contain either an unsymmetrically substituted h⁵-cyclopentadienyl ring or a chiral tertiary phosphine.     

Mechanism of the forbidden [3s,5s]-sigmatropic shift: orbital symmetry influences stepwise mechanisms involving diradical intermediates

The mechanisms of [3s,5s]-sigmatropic shifts of octa-1,3,7-triene and 7-methylenenona-1,3,8-triene have been elaborated using B3LYP and BPW91 density functional theory and CASPT2 methods. These orbital symmetry forbidden rearrangements are stepwise, involving diradical intermediates. A comparison with several [3,3]-sigmatropic shifts of substituted hexadienes and of [5,5]-sigmatropic shifts that are allowed, but nevertheless follow stepwise paths, shows that the activation barrier for the disallowed [3,5] shift is significantly larger than that for the stepwise reactions that are orbital symmetry allowed. Cyclic diradicals that have an aromatic circuit of electrons including the two radical centers and conjugated pi or sigma bonds are stabilized as compared to cyclic diradicals with an antiaromatic circuit of electrons. This applies to the transition states leading to and from the diradicals and influences the activation energies of stepwise sigmatropic shifts. The magnitudes of these effects are small but will have a significant influence on the rates of competing processes. This series of calculations has been used to assess the relative capabilities of the two functionals. We find that BPW91 underestimates the endothermicity of diradical formation and the barrier to diradical formation whereas B3LYP overestimates these quantities.     

Enumeration of total yeasts and molds in foods by the SimPlate Yeast and Mold-Color Indicator method and conventional culture methods: collaborative study

The relative effectiveness of the SimPlate Yeast and Mold-Color Indicator method (Y&M-CI) was compared to the U.S. Food and Drug Administration's (FDA) Bacteriological Analytical Manual (BAM) method and the proposed International Organization for Standardization (ISO) method, ISO/CD 21527, for enumerating yeasts and molds in foods. Test portions were prepared and incubated according to the conditions stated in both the BAM and ISO methods. Six food types were analyzed: frozen corn dogs, nut meats, frozen fruits, cake mix, cereal, and fresh cheese. Nut meats, frozen fruits, and fresh cheese were naturally contaminated. All other foods were artificially contaminated with either a yeast or mold. Seventeen laboratories throughout North America and Europe participated in the study. Three method comparisons were conducted. In general, there was <0.3 mean log count difference in recovery between the SimPlate method and the 2 corresponding reference methods. Moreover, mean log counts between the 2 reference methods were also very similar. The repeatability (Sr) and reproducibility (SR) standard deviations were comparable between the 3 method comparisons. These results indicate that the BAM method and the SimPlate method are equivalent for enumerating yeast and mold populations in foods. Similarly, the SimPlate method is comparable to the proposed ISO method when test portions are prepared and incubated as defined in the proposed ISO method.     

Redox,transmetalation, and stacking properties of tetrathiafulvalene-2,3,6,7-tetrathiolate bridged tin,nickel, and palladium compounds

Here we report that capping the molecule TTFtt (TTFtt = tetrathiafulvalene-2,3,6,7-tetrathiolate) with dialkyl tin groups enables the isolation of a stable series of redox congeners and facile transmetalation to Ni and Pd. TTFtt has been proposed as an attractive building block for molecular materials for two decades as it combines the redox chemistry of TTF and dithiolene units. TTFttH₄, however, is inherently unstable and the incorporation of TTFtt units into complexes or materials typically proceeds through the in situ generation of the tetraanion TTFtt⁴⁻. Capping of TTFtt⁴⁻ with Bu₂Sn²⁺ units dramatically improves the stability of the TTFtt moiety and furthermore enables the isolation of a redox series where the TTF core carries the formal charges of 0, +1, and +2. All of these redox congeners show efficient and clean transmetalation to Ni and Pd resulting in an analogous series of bimetallic complexes capped by 1,2-bis(diphenylphosphino)ethane (dppe) ligands. Furthermore, by using the same transmetalation method, we synthesized analogous palladium complexes capped by 1,1′-bis(diphenylphosphino)ferrocene (dppf) which had been previously reported. All of these species have been thoroughly characterized through a systematic survey of chemical and electronic properties by techniques including cyclic voltammetry (CV), ultraviolet-visible-near infrared spectroscopy (UV-vis-NIR), electron paramagnetic resonance spectroscopy (EPR), nuclear magnetic resonance spectroscopy (NMR) and X-ray diffraction (XRD). These detailed synthetic and spectroscopic studies highlight important differences between the transmetalation strategy presented here and previously reported synthetic methods for the installation of TTFtt. In addition, the utility of this stabilization strategy can be illustrated by the observation of unusual TTF radical–radical packing in the solid state and dimerization in the solution state. Theoretical calculations based on variational 2-electron reduced density matrix methods have been used to investigate these unusual interactions and illustrate fundamentally different levels of covalency and overlap depending on the orientations of the TTF cores. Taken together, this work demonstrates that tin-capped TTFtt units are ideal reagents for the installation of redox-tunable TTFtt ligands enabling the generation of entirely new geometric and electronic structures.

Capping TTFtt enables facile transmetalation in three different oxidation states.