Temperature requirements for thermal modulation in comprehensive two-dimensional gas chromatography

Temperature requirements for trapping and release of compounds in a cryogenic gas loop-type GC x GC modulator were determined. Maximum trapping temperatures on the uncoated, deactivated modulator capillary were determined for compounds from C4 (bp -0.5 degrees C) to C40 (bp 522 degrees C). The liquid-nitrogen cooled gas flow rate was reduced from a high of 15.5 to 1.5 SLPM over the range to achieve the required trapping temperature. Excessive cold jet flow rates caused irreversible trapping and peak tailing for semi-volatile compounds above C26. Alternate cold jet coolants were investigated. An ice water-cooled jet was able to trap compounds with boiling points from C18 (bp 316 degrees C) to C40 and a room temperature air-cooled jet was able to trap compounds from C20 (bp 344 degrees C) to C40. The hot jet produced launch temperatures approximately 40 degrees C hotter than the elution temperature with heating time constants of 8 to 27 ms. Modulated compound peaks were symmetrical with half-height peak widths of 43 to 56 ms for compounds with little second column retention, and 70 to 75 ms for compounds with more second column retention. The liquid nitrogen-cooled loop modulator with gas flow programming was used to produce a GC x GC chromatogram for a crude oil that contained compounds from C7 to C47.     

Synthesis of some fused β‐carbolines including the first example of the pyrrolo[3,2‐c]‐β‐carboline system

Condensation of 1‐methyl‐β‐carboline‐3‐carbaldehyde with ethyl azidoacetate and subsequent thermolysis of the resulting azidopropenoate was used to [c] annulate a pyrrole ring onto the β‐carboline moiety, thus producing the first example of the pyrrolo[3,2‐c]‐β‐carboline ring system. The latter ring system results from cyclization at the C‐4 carbon, whereas cyclization at the N‐2 nitrogen atom also occurs to form a pyrazolo[3,2‐c]‐β‐carboline ring system. Condensation of β‐carboline‐1‐carbaldehyde with ethyl azidoacetate produced a non‐isolable intermediate, which immediately underwent cyclization, however in this case cyclization occurred via attack at the ester and the azide remained intact. The resulting 5‐azidocanthin‐6‐one was transformed to the first examples of 5‐aminocanthin‐6‐ones. β‐Carboline‐1,3‐dicarbaldehyde failed to give an acceptable reaction with ethyl azidoacetate, but did undergo selective condensation with dimethyl acetylene dicarboxylate at the C‐1 carbaldehyde with concomitant cyclization to form a highly functionalized 2‐formyl‐canthine derivative.     

Production and characterisation of polyclonal antibodies to a derivative of 3-amino-2-oxazolidinone, a metabolite of the nitrofuran furazolidone

Polyclonal antibodies were produced to detect 3-amino-2-oxazolidinone (AOZ), a stable metabolite of the nitrofuran antibiotic furazolidone, following derivatisation with o-nitrobenzaldehyde. A carboxyphenyl derivative of AOZ was prepared, purified and conjugated to immunogenic carrier protein. Six antisera were produced from the immunisation of seven rabbits using various immunogen doses and time-scales. IC₅₀ values, as determined by competitive enzyme-linked immunosorbent assay (ELISA) suggested that reducing immunogen dose from 0.3 to 0.05 mg, while lengthening rest periods between booster immunisations from 2 to 8 weeks, increased the sensitivity of the antibodies to 3-{[(2-nitrophenyl)methylene]amino}-2-oxazolidinone (NPAOZ) from 3.8 to 0.3 μg l⁻¹. An IC₅₀ of 0.065 μg l⁻¹ (AOZ in the form of NPAOZ) was achieved with antiserum R670 by altering ELISA conditions. This antibody was highly specific for NPAOZ and did not cross-react with various nitrofuran metabolites, their nitrophenyl derivatives or a range of veterinary drugs. Antibody R670 is suitable for incorporation into an immunoassay for AOZ with sufficient sensitivity to satisfy current criteria for monitoring of veterinary drug residues. This is the first publication of an antibody for detection of a nitrofuran metabolite.     

Asymmetric conjugate addition of thioglycolate to a range of chalcones using tetrahydroisoquinoline (TIQ) N,N′-dioxide ligands

A series of novel TIQ based N,N′-oxide ligands were synthesised and screened for their catalytic activity in the enantioselective conjugate addition of thioglycolate to chalcones. Bulky groups on the side chain of the TIQ backbone provided the highest enantioselectivity of up to 88% with 10 mol % catalyst loading. It was also observed that these reactions proceeded optimally in the presence of dichloromethane as a solvent. Screening of various metals emphasized La(OTf)₃ as the ideal pre-catalyst for this particular reaction.     

DFT study of group 8 catalysts for the hydrophenylation of ethylene: Influence of ancillary ligands and metal identity

Computational methods are used to investigate catalytic hydrophenylation of ethylene using complexes of the type [(Y)M(L)(CH₃)(NCMe)]ⁿ⁺ [Y = Mp, n = 1; Y = Tp, n = 0; M = Ru or Os; L = PMe₃, PF₃, or CO; Mp = tris(pyrazolyl)methane; Tp = hydrido-tris(pyrazolyl)borate]. The conversion of ethylene and benzene to ethylbenzene with [(Y)M(L)(Ph)]ⁿ⁺ as catalyst involves four steps: (1) ethylene coordination, (2) ethylene insertion into the M–Ph bond, (3) benzene coordination, and (4) benzene C–H activation. DFT calculations form the basis to compare stoichiometric benzene C–H activation by [(Y)M(L)(CH₃)(NCMe)]ⁿ⁺ complexes to yield methane and [(Y)M(L)(Ph)(NCMe)]ⁿ⁺. In addition, starting from the 16-electron species [(Y)M(L)(Ph)]ⁿ⁺, potential energy surfaces for the formation of ethylbenzene are calculated to reveal the impact of modifications to the scorpionate ligand (Mp or Tp), co-ligand (L) and metal center (M).     

Microwave‐Assisted Hydrogel Synthesis: A New Method for Crosslinking Polymers in Aqueous Solutions

It has been found that hydrogels may be formed by microwave irradiation of aqueous solutions containing appropriate combinations of polymers. This new method of hydrogel synthesis yields sterile hydrogels without the use of monomers, eliminating the need for the removal of unreacted species from the final product. Results for two particularly successful combinations, poly(vinyl alcohol) with either poly(acrylic acid) or poly(methylvinylether‐alt‐maleic anhydride), are presented. Irradiation using temperatures of 100–150 °C was found to yield hydrogels with large equilibrium swelling degrees of 500–1000 g g⁻¹. Material leached from both types of hydrogel shows little cytotoxicity towards HT29 cells.     

Photochemically modulated endothelial cell thrombogenicity via the thrombomodulin-tissue factor pathways

Photodynamic therapy (PDT) is based on a photochemical reaction using a photosensitizer and light to produce reactive oxygen species that have biological effects. Although its application in some fields is largely based on thrombosis, in the vascular setting thrombosis must be prevented. In this study we examined the effects of PDT on the changes in activity of thrombomodulin (TM) and tissue factor (TF) as important regulators of the coagulation process of endothelial cells. Human umbilical vein endothelial cells were treated with PDT (chloro-aluminum-sulfonated phthalocyanine, lambda = 630 nm) at different light-energy doses, and TM and TF levels were measured using fluorescence spectroscopy. Microparticles (MP) were analyzed using flow cytometry analysis. PDT alters the thrombogenic state of endothelial cells by causing decreased expression of TM and increased expression of functional TF in a light-energy dose-dependent way. PDT-treated endothelial cells shed large numbers of MP containing high levels of TF. TF functionality of PDT-treated cells, measured by a Factor Xa-generating assay, was high. TF was located mostly intracellularly and in MP. The disturbed anticoagulant balance described in this study may explain the occurrence of thrombosis induced by PDT and, if not contained, dispute the suitability of PDT as an adjuvant modality to treat vascular restenosis.     

Chemical Synthesis, 3D Structure,and ASIC Binding Site of the Toxin Mambalgin‐2

Mambalgins are a novel class of snake venom components that exert potent analgesic effects mediated through the inhibition of acid‐sensing ion channels (ASICs). The 57‐residue polypeptide mambalgin‐2 (Ma‐2) was synthesized by using a combination of solid‐phase peptide synthesis and native chemical ligation. The structure of the synthetic toxin, determined using homonuclear NMR, revealed an unusual three‐finger toxin fold reminiscent of functionally unrelated snake toxins. Electrophysiological analysis of Ma‐2 on wild‐type and mutant ASIC1a receptors allowed us to identify α‐helix 5, which borders on the functionally critical acidic pocket of the channel, as a major part of the Ma‐2 binding site. This region is also crucial for the interaction of ASIC1a with the spider toxin PcTx1, thus suggesting that the binding sites for these toxins substantially overlap. This work lays the foundation for structure–activity relationship (SAR) studies and further development of this promising analgesic peptide.